Weslo Cadence 60 Se Treadmill Bedienungsanleitung

Model No. WLTL49806.0

Serial No.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

Serial Number

Decal USER'S MANUAL

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction.If you

have questions, or if parts are

damaged or missing, PLEASE

CONTACT OUR CUSTOMER

SERVICE DEPARTMENT

DIRECTLY.

CALL TOLL-FREE:

1-866-699-3756

Mon.–Fri., 6 a.m.–6 p.m. MST

ON THE WEB:

www.wesloservice.com

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.

WESLO is a registered trademark of ICON IP, Inc.

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described.

3. Place the treadmill on a level surface, with at

least eight feet of clearance behind it and two

feet on each side. Do not place the treadmill

on any surface that blocks air openings. To

protect the floor or carpet from damage, place

amat under the treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

6. Keep children under the age of 12 and pets

away from the treadmill at all times.

7. The treadmill should be used only by persons

weighing 275 pounds or less.

8. Never allow more than one person on the

treadmill at a time.

9. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women.

Always wear athletic

shoes. Never use the treadmill with bare feet,

wearing only stockings, or in sandals.

10. When connecting the power cord (see page 12),

plug the power cord into a surge suppressor

(not included) and plug the surge suppressor

into a grounded circuit capable of carrying 15

or more amps. No other appliance should be on

the same circuit. Do not use an extension cord.

11. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 12. To purchase a surge suppressor, see

your local WESLO dealer or call the toll-free

telephone number on the front cover of this

manual and order part number 146148, or see

your local electronics store.

12. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may change

speed, accelerate, or stop unexpectedly,

which may result in a fall and serious injury.

13. Keep the power cord and the surge suppres-

sor away from heated surfaces.

14. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See TROU-

BLESHOOTING on page 21 if the treadmill is

not working properly.)

15. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 13).

16. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

17. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

18. Never leave the treadmill unattended while it

is running. Always remove the key and unplug

the power cord when the treadmill is not in

use.

19. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

WARNING: Toreduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

20. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6, and HOW TO FOLD

AND MOVE THE TREADMILL on page 20.)

You must be able to safely lift 45 pounds (20

kg) to raise, lower, or move the treadmill.

21. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

22. Inspect and properly tighten all parts of the

treadmill regularly.

23. Never insert any object into any opening.

24. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the

maintenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized ser-

vice representative only.

25. This treadmill is intended for in-home use

only. Do not use this treadmill in a commer-

cial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown here have been placed on the treadmill. If a decal is missing, or if

it is not legible, call the toll-free telephone number on the front cover of this manual

and order a free replacement decal. Apply the decal in the location shown. Note:

The decals are not shown at actual size.

Thank you for selecting the new WESLO®CADENCE

60SE treadmill. The CADENCE 60 SE treadmill com-

bines advanced technology with innovative design to

help you get the most from your exercise in the conve-

nience of your home. And when you’re not exercising,

the CADENCE 60 SE treadmill can be folded up, requir-

ing less than half the floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill.If you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before calling. The model

number of the treadmill is WLTL49806.0. The serial

number can be found on a decal attached to the tread-

mill (see the front cover of this manual for the location).

To avoid a registration fee for any service needed

under warranty, you must register the treadmill at

www.wesloservice.com/registration.

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Upright

Storage Latch

Key/Clip

Reset/Off

Circuit Breaker

Walking Belt

Cushioned Walking Platform

for maximum exercise comfort

Foot Rail

Power Cord

RIGHT SIDE

Rear Roller

Adjustment Bolts

Console

Fan

Accessory Tray

BACK

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly

requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of the

packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with

high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking belt or to the

shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top

of the walking belt, wipe it off with a soft cloth and mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own phillips screwdriver , rubber

mallet , adjustable wrench , and needlenose pliers .

To identify assembly hardware, see the drawings below. The number in parentheses below each drawing is the

key number of the part, from the PART LIST in the center of the manual. The number following the parentheses

is the quantity used in assembly. To avoid damaging plastic parts, do not use power tools for assembly.

Nut (47)–2

3/4" Screw (2)–14

Frame Washer

(33)–2

Silver Ground

Screw (11)–2

Wheel Spacer

(44)–4

Console

Bolt (22)–2

Upright Bolt (27)–4

1/4” Star Washer

(21)–2

Wheel Nut (35)–2

Wheel Bolt (14)–2

Frame Bolt (32)–2

Upright Star

Washer (39)–4

Handrail Bolt (20)–4

Handrail Star

Washer (19)–4

Base Pad Screw (92)–4

1. Attach a Wheel (45) to one side of the Base (48)

with a Wheel Bolt (14), two Wheel Spacers (44),

and a Wheel Nut (35) as shown. Do not over-

tighten the Wheel Nut; the Wheel should turn

freely.

Attach the other Wheel (45) to the other side

of the Base (48) in the same way.

Attach the four Base Pads (37) to the Base (48)

with four Base Pad Screws (92); make sure that

the screws are in the indicated holes in the

Base.

45 44

Hole

3. Orient the Right Upright (36) as shown, and at-

tach it to the Base (48) with two Upright Bolts

(27) and two Upright Star Washers (39); do not

tighten the Upright Bolts yet.

4. Set the Base (48) near the front of the treadmill,

with the Power Cord (13) on the Hood (1) as

shown.

Cut the small tie (not shown) holding the Upright

Wire (28) in a bundle.

Wrap the strap around the Upright Wire (28) and

secure the strap using the included plastic tie.

Then, pull the opposite end of the strap until the

end of the Upright Wire is pulled through the

Right Upright (36).

Raise the Uprights (31, 36) so that the Base (48)

is flat on the floor. Make sure that the end of the

Upright Wire (28) does not fall into the Right

Upright.

Strap

Tie

Large

Hole

2. Have a second person orient the Base (48) as

shown.

Identify the Left Upright (31), which has a large

hole near the bend as shown.

Orient the Left Upright (31) as shown, and attach

it to the Base (48) with two Upright Bolts (27) and

two Upright Star Washers (39); do not tighten

the Upright Bolts yet. 48

Bend

Large Hole

Bend

5. See the left inset drawing. Identify the two Frame

Spacers (34). Open the included packet of

grease, and apply grease to both sides of both

Frame Spacers. Then, identify the outer side of

each Frame Spacer.

Next, hold a Frame Spacer (34) between the

Right Upright (36) and the Lift Frame (59), with

the outer side of the Frame Spacer facing the

Right Upright. Attach the Right Upright to the

Lift Frame with a Frame Bolt (32), a Frame

Washer (33), and a Nut (47); do not tighten the

Frame Bolt yet.

Then, identify the Right Base Cover (91). Slide

the Right Base Cover onto the Right Upright (36)

and turn it to the position shown.

Pull gently on the upper end of the Upright Wire

(28) to remove any excess slack.

Cut the plastic tie and remove the strap from the

Upright Wire (28).

536

Outer

Side

Inner

Side

34 36

6. See the left inset drawing. Identify the outer side

of the remaining Frame Spacer (34).

Hold the Frame Spacer (34) between the Left

Upright (31) and the Lift Frame (59), with the

outer side of the Frame Spacer facing the

Left Upright. Attach the Left Upright to the Lift

Frame with a Frame Bolt (32), a Frame Washer

(33), and a Nut (47); do not tighten the Frame

Bolt yet.

Identify the Left Base Cover (90). Slide the Left

Base Cover onto the Left Upright (31) and turn it

to the position shown.

Outer

Side

Inner

Side

34 31

9. While another person holds the Console Base

(26) near the right Handrail (18). Connect the

console wire to the Upright Wire (28) as shown

in the inset drawing. Important: If the connec-

tors are oriented correctly, they will slide to-

gether easily and snap into place. If the con-

nectors are not oriented correctly, the con-

sole may be damaged when the power is

turned on. Insert the connectors into the Right

Upright (36).

Attach the Console Base (26) to the Right

Upright (36) and the Left Upright (not shown)

with four Handrail Bolts (20) and four Handrail

Star Washers (19) (only one side is shown).

Start all four Handrail Bolts before tightening

any of them.

Console Wire

7. Set the console assembly face down on a soft

surface to avoid scratching it. Hold a Handrail

(18) near the console assembly.

Next, insert the console wire into the hole in the

bottom of the Handrail (18) and out of the indi-

cated square hole. If necessary, grip the con-

nector with needlenose pliers only in the area

indicated by the arrow (see the inset drawing.)

Then, attach the ground wire to the Handrail with

aSilver Ground Screw (11).

Next, set the Handrail (18) on the console as-

sembly. Make sure that no wires are pinched.

Finger tighten a Console Bolt (22) with a 1/4"

Star Washer (21) into the Handrail, and then

start two 3/4" Screws (2) into the Handrail.

Tighten the Console Bolt and then the two

Screws; do not overtighten the Screws.

Attach the other Handrail (not shown) to the con-

sole assembly in the same way. Note: There are

no wires on the other side.

Ground

Wire

Console

Wire

Console

Assembly

Square

Hole

18 22

21 2

8. Insert the Upright Wire (28) through a Handrail

Spacer (88) as shown. Attach the Handrail

Spacer to the Right Upright (36) with a 3/4"

Screw (2).

Attach the other Handrail Spacer (not shown) to

the Left Upright (not shown) as described above.

Note: There is not a wire on the left side.

10. Lower the Uprights (31, 36).

See the inset drawing. Position the Uprights (31,

36) so that the treadmill Frame (74) is centered

between the Uprights.

See steps 2–6. Firmly tighten the Upright Bolts

(27) and the Frame Bolts (32) on each side of

the treadmill. Do not overtighten the Frame

Bolts.

31, 36

View from Above

Side View

11. Raise the Uprights (31, 36).

Rotate the Left and Right Base Covers (90, 91)

180 degrees. Slide the Base Covers over the

Base (48). If necessary, pull out on the sides of

the Base Covers to fit them over the Wheel Bolts

(14).

90, 91

31, 36

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence 75 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence S6 Treadmill null

Weslo

Weslo Cadence C32 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence G 5.9 Treadmill Bedienungsanleitung

Weslo

Weslo CADENCE TS 310 Bedienungsanleitung

Weslo

Weslo Cadence 600 Treadmill Systemhandbuch

Weslo

Weslo Cadence 975 Bedienungsanleitung

Weslo

Weslo Sport 100 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo WLTL11093 Bedienungsanleitung

Weslo

Weslo 445i Treadmill Bedienungsanleitung

Weslo

Weslo easy compact 2 WETL20709.0 Bedienungsanleitung

Weslo

Weslo Cadence 500 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence 150 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 30.8 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 700 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence C78 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 1020 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence C 8 Treadmill Kurzanleitung

Weslo

Weslo Crosswalk 5.0t Treadmill Benutzerhandbuch

Weslo

Weslo Cadence S5 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence 5.0 Treadmill Benutzerhandbuch

Weslo

Weslo WLTL27081 Bedienungsanleitung

Weslo

Weslo Cadence 5.0 Treadmill Systemhandbuch

Weslo

Weslo CADENCE 55 WETL13606.0 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung