Weslo CADENCE 850 Bedienungsanleitung

Model No. WLTL85051/WLTLSS551 :_

Serial No.

Serial Number Decal

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or find that

there are missing or damaged

parts, we will guarantee you

complete satisfaction through

direct assistance from our facto-

ry. TO AVOID UNNECESSARY

DELAYS, PLEASE CALL DIRECT

TO OUR TOLL-FREE CUSTOMER

HOT LINE. The trained techni-

cians on our Customer Hot Line

will provide immediate assis-

tance, free of charge to you.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.-Fri., 6 a.m.-6 p.m. MST

CAUTION

OWNER'S MANUAL

C E ® .._:_!i_i_!,dii!_'_:_. •........

,iiiJiiiiii!F..................

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS ................................................................. 3

BEFORE YOU BEGIN ....................................................................... 6

ASSEMBLY ............................................................................... 5

OPERATION AND ADJUSTMENT ............................................................. 7

TROUBLE-SHOOTING AND STORAGE ........................................................ 10

CONDITIONING GUIDELINES ............................................................... 12

PART LIST ............................................................................... 14

EXPLODED DRAWING ..................................................................... 15

ORDERING REPLACEMENT PARTS .................................................. Back Cover

LIMITED WARRANTY ............................................................... Back Cover

i!i_!!!_i!iii!_!_ii!i!_ii_i_i!i_i_i!!!ii!_!!_i_i!_!!iiiii_i_i_i_!_!_!i!_ii!i!i!i!i!_!i!i!ii!i_!_i:!i!ii_!_!i_i!_ii_ii_i_ii_i_!i!i_i_!_!_ii!!_!:!_!i_iii_i_ii!_i_!!!i_i_i!_!i!_ii!¸!i!_iii!i!_!i_ii_i:!i_!_!_i_i_i!!_!_!!i_iii_!_i_iii_i!!!i!_i_:_:_!i!!_iiii!!_¸_!:_i_i_i_!!i!_i_i_i_ii_!!!i!i_i_i!_!!_i_i;_!i!i_iii!i!i_iii_iiii!_iii_i_i_iiiii_i!!i;i_i!_!i_iiU_i_i_!ii_i_!_!_!!_i__'i!i!i!!ii!i_i!!¸_i_i_!!_i!i!i!_!!_!i_!ii_i_i_ii_!!ii_!iiii_i!!_!_ii!_!iii_iiii!iii_i_!_!i_;!_!ii_i_ii_iii!i_i_i!i_i_i_i_i!!!i_i!i_:!!!i_i_iii!!_i!!i!ii_i_

!iiiii!i!i]iiiiii:_W_l!l_n_l_:_iiiiiiiiZ:i :i¸:i: :iil i !i !! i :_i:i_:d_iii_i_iiiiii_!_ii_iii_ii_ii_ii:iii:ii_:i_iii:_i_iii_i_iii!i_ii:ii_iii:iiiiiiiiiiiiiii_i_ii_!_ii:iii_!_i_iiii_:ii__________________:____________________________]________________________;____d________;____________________:________f______________________________;_q_____________________&__

IMPORTANT PRECAUTIONS

following important precautions and information before operating the treadmill.

1. It is the responsibility of the owner to ensure the power cord or plug is damaged, or if the

that all users of this treadmill are adequately treadmill is not working properly. (See

Informed of all warnings and precautions, BEFORE YOU BEGIN on page 5 if the tread-

mill is not working properly.)

2. Use the treadmill only as described in this

manual.

12. Keep the power cord and the surge protector

away from heated surfaces.

Place the treadmill on a level surface, with

eight feet of clearance behind it. Do not place 13. Never start the treadmill while you are stand-

the treadmill on any surface that blocks air ing on the walking belt. Always hold the

openings. To protect the floor or carpet from

damage, place a mat under the treadmill.

Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

Keep small children and pets away from the

treadmill at all times.

14.

handrails while exercising on the treadmill.

The treadmill is capable of high speeds.

Adjust the speed in small increments to

avoid sudden jumps in speed.

15. To reduce the possibility of the treadmill

overheating, do not operate the treadmill

continuously for longer than 1 hour.

16. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

The treadmill should be used only by per- as an exercise aid in determining heart rate

sons weighing 250 pounds or less. Never trends in general.

allow more than one person on the treadmill

at a time. 17; Never leave the treadmill unattended while it

is running. Always remove the SAFEKEY

8. Wear appropriate exercise attire when using when the treadmill is not in use.

the treadmill. Do not wear loose clothing that

could become caught in the treadmill. 18, To change the incline level of the treadmill,

Athletic support clothes are recommended refer to the instructions on page 10. Do not

for both men and women.Always wear athlet, use the treadmill with the inctine pins

ic shoes. Never use the treadmill with bare removed.

feet, wearing only stockings, or in sandals. ..........

1_. Never orop or insert any ot)jec[ into any

9. When connecting the power cord (see HOW opening.

forming the maintenance and adjustment

be on the same circuit. procedures described inthis manual. Never

remove the motor hood unless instructed to

10. Use only a UL-listed surge protector, rated at

15 amps, with a !4-gauge cord of five feet or do so by an authorized service representa-

less in length. Donot use an extension Cord; tire. se_cing other than the procedures in

......... performed by an

11. Nevermore the walking

BEFORE YOU BEGIN

Thank you for selecting the WESLO CADENCE s 850

tread_nill. The CADENCE 850 treadmill blends

advanced technology with innovative design to let you

enjoy an excellent form of cardiovascular exercise in

the convenience and privacy of your home.

For your benefit, read this manual carefully before

using the treadmill. If you have additional questions,

please call our Customer Service Department toll-free

at 1-800-999-3756, Monday through Friday, 6 a.m.

until 6 p.m. Mountain Time (excluding holidays). To

help us assist you, please note the product model

number and serial number before calling. The model

number is WLTL85051/VVLTL55551. The serial num-

ber can be found on a decal attached to the treadmill

(see the front cover of this manual for the location).

Before reading further, please review the drawing

below and familiarize yourself with the parts that are

labeled.

Accessory Console\ /Towel Rack

SAFEKEYTM/Clip

Water Bottle Holder

Water Bottle not

included)

Pulse Sensor

j Upright

FRONT

Hood

Breaker

Walking Belt Incline Pin

BACK

Rear Roller

Adjustment Bolt

RIGHT SIDE

Foot Rail

Power Cord

ASSEMBLY

Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until

assembly is completed. Refer to the drawings below to identify small parts used in assembly.

TOOLS REQUIRED FOR ASSEMBLY: One adjustable wrench (not included).

3/8" Washer (50)-4

0o,,,40,

3/8" Flange Nut (48)-2

3/8" x 1" Bolt (2)-3

1. Raise the Upright (11) to the vertical position. Insert a 3/8" x

1" Bolt (2), with the 3/8" x 1 1/2" Washer (28), into the lower

end of the Upright. Finger tighten the Bolt into the Frame (59).

2. If there are plastic cable ties in the holes of the Handrails (1), cut

them off. Insert the upper end of one of the Handrails into the

Console Housing (3). (Note: The two Handrails are identical. Due

to the manufacturing process, there is a dimple near the lower

end of each Handrail. It makes no difference which side the dim-

ple is on when the Handrails are assembled.) Insert a 3/8" x 1"

Bolt (2), with a 3/8" Washer (50), up into the plate under the

Console Housing, and finger tighten the Bolt into the Handrail.

Attach the other Handrail (1) in the same manner.

.Insert a 3/8" x 2 3/4" Bolt (49), with a 3/8" Washer (50), into the

lower end of the right Handrail (1) and the Frame (59). Reach

under the Frame and tighten a 3/8" Flange Nut (48) onto the

Bolt.

Attach the other Handrail (1) (not shown) in the same manner.

Tighten all Bolts used in steps 1 through 3. i49

59 L_

48 50

4. TheConsole(3)requiresthree"AA"batteries(notincluded);alka-

linebatteriesarerecommended.SlideuptheBatteryCover(77).

Pressthreebatteriesintothebatterycompartment,withthenega-

tive(-)endsofthebatteriestouchingthesprings.ClosetheBattery

Cover.

5. RemovethepaperbackingfromtheWrenchClip(64).Pressthe

WrenchClipontotheRightEndcap(63)intheindicatedloca-

tion.PresstheAllenWrench(65)intotheWrenchClip.

Makesurethatallpartsaretightenedbeforeyouusethetreadmill.Note:Toprotectthefloororcarpet, place a

mat under the treadmill.

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBE TM WALKING BELT

Your treadmill features a walking belt coated with

PERFORMANT LUBETM, a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other

substances to the walking belt or the walking plat-

form. They will deteriorate the walking belt and

cause excessive wear.

HOW TO PLUG IN THE POWER CORD

of the equipment*grounding conductor can

result in an increased risk ofelec_rt¢ shock.

risk of electric shock. This product is equipped with a

cord having an equipment-grounding conductor and a

grounding plug. Plug the power cord into a surge

protector, and plug the surge protector into an

appropriate outlet that is properly installed and

grounded in accordance with all local codes and

ordinances.

This product isfor use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus-

trated in drawing 1 below. A temporary adapter that

looks like the adapter illustrated in drawing 2 may be

used to connect the surge protector to a 2-pole recep-

tacle as shown in drawing 2 if a properly grounded out-

let is not available.

the plug provided with the product--if it will

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed

by a qualified electrician.

Your treadmill, like any other type of sophisticated

electronic equipment, can be seriously damaged by

sudden voltage changes in your home's power.

Voltage surges, spikes, and noise interference can

result from weather conditions or from other appli-

ances being turned on

or off. To decrease the

possibility of your 1

treadmill being dam-

aged, always use a

surge protector (not

included) with your

treadmill.

Surge protectors are

sold at most hardware

stores and department

stores. Use only a UL-

listed surge protector,

rated at 15 amps, with a

14-gauge cord of five

feet or less in length.

This product must be

grounded. If it should

malfunction or break

down, grounding pro-

vides a path of least

resistance for electric

current to reduce the

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet box

covers are not grounded. Contact a qualified elec-

trician to determine if the outlet box cover is

grounded before using an adapter.

_rounded Outlet Box

g Pin

Grounding Plug

Treadmill Power Cord--.

Grounding Plu_

3rounded Outlet

Metal Scre_ ;_

Grounding Plug

I\Surge Protector

DIAGRAM OF THE CONSOLE

3eed Control

SPEED

CALORIES/PULSE

ON/CLEAR

Note: If there is a thin sheet of clear

plastic on the face of the console,

remove it. Be careful to avoid

spilling liquids on the console.

Pulse Sensor

_!iiiiiii_i%!i!i!_!iii_ii_ii!ii!iiiii_ii_i_iiii!_!_!i!i_i_!_!_i_i_!ii_ii!_i_!_!_!_iii!ii_!!i_i_!i_;_!ii¸_i_!¸ili_iii!ii!iiii!iliiiiiiliiiiiiiiiiiiiiiiii!i!!ililliiiiiiiii!iiii:iii!fill!iilil

Follow the simple steps below to operate the console:

Insert the SAFEKEY fully into the power switch.

Note: The three dis-

plays will not

appear yet, unless

batteries were just

installed.

SAFEKEY F_<"_

iiiiiiiiiiiiiiii!iiiii%ii_iiiiiiiiiiiiiiiiiii!iiiiiiiii_iiiii!iiiii!!!!ili

STEP BY STEP CONSOLE OPERATION

Before operating the console, make sure that the

power cord is properly plugged in. (See HOW TO

PLUG IN THE POWER CORD on page 7).

Next, step onto the foot rails of the treadmill. Find the

clip attached to the SAFEKEY (see the drawing

above), and slide the clip onto the waistband of your

clothing.

E!Press the ON/CLEAR button.

When the

ON/CLEAR button is

pressed, the three

displays will appear.

Note: If batteries

were just installed,

the displays will

already appear.

B eset the speed control and start the walking

belt.

Slide the speed

control all of the

way to the left, to

the "SPEED

RESET" position•

Next, slide the con-

trol to the right until

the walking belt

_ Speed Control

begins to move at slow speed.

Carefully step onto the walking belt and begin

walking. Change the speed of the walking belt as

desired by sliding the speed control. Note: To stop

the walking belt, step onto the foot rails and slide

the speed control to the "SPEED RESET" position.

Measure your pulse, if desired.

To use the pulse

sensor, stand on

the foot rails and

place your thumb

on the pulse sensor

as shown. The

pulse sensor is

pressure-activated.

Fully press down

the pulse sensor. Do not press too hard, or the

circulation in your thumb will be restricted, and

your pulse will not be detected. Next, slightly raise

your thumb until the heart-shaped indicator in the

CALORIES/PULSE display flashes steadily. Hold

your thumb at this level. After 5 to 10 seconds, your

pulse will be displayed. If the displayed pulse

appears to be too high or too low, or if your pulse is

not displayed, lift your thumb off the sensor and

allow the display to reset. Press down again on the

sensor as described above. Make sure that your

thumb is positioned as shown, and that you are

applying the proper amount of pressure. Try the

sensor several times until you become familiar with

it. Always stand still while measuring your pulse.

Follow your progress with the three displays.

TIME/DISTANCE

display--This dis-

play shows the

elapsed time and

the total distance

that you have

walked or run.

Every seven sec-

onds, the display

oo-oo Mode

'_'_lndicators

TIM_i[_STANCE

,__u.uill

sPEm /L

ICALORIES/FUISE .......

will alternate between elapsed time (the left mode

indicator will appear) and total distance (the right

mode indicator will appear). Note: When the walk-

ing belt is stopped, the elapsed time will pause.

SPEED display--This display shows the speed of

the walking belt, in miles per hour (MPH) or kilome-

ters per hour (KPH). To change the unit of measure-

ment, hold down the ON/CLEAR button for five sec-

onds. The MPH indicator will disappear, and the

KPH indicator will appear. Note: If MPH is selected,

the distance will also be displayed in miles; if KPH is

selected, the distance will be displayed in kilometers.

CALORIES/PULSE display--This display shows

the approximate number of nutritional calories you

have burned. Note: It also shows your heart rate

when your thumb is on the pulse sensor.

To reset the three displays, press the ON/CLEAR

button.

The CALORIES/PULSE display shows the approxi-

mate number of calories you have burned. This

number includes both carbohydrate calories and fat

calories (see BURNING FAT on page 12). If your

goal is to burn fat, you can find the approximate

number of fat calories you have burned by using the

table below. Find the number of calories you have

burned in the shaded columns, and look to the right

to find the number of fat calories you have burned.

Calories

t00

110

120

130

140

150

160

170

180

190

200

Fat Cal.

100

106

113

119

125

Calories

210

220

230

240

25O

260

270

280

290

300

310

320

330

340

350

360

370

38O

390

40O

Fat Cal.

131

138

144

150

156

163

169

175

181

188

194

2O0

206

213

219

225

231

238

244

250

r_When you are finished exercising, stop the

walking belt and remove the SAFEKEY.

Step onto the foot

rails and slide the

speed control to

the "SPEED

RESET" position.

Remove the

SAFEKEY from

the console.

ii I ]

Note: The three displays will not turn off when

the SAFEKEY is removed. About five minutes

after the walking belt is stopped, the displays will

turn offautomatically.

HOWTOCHANGETHEINCLINEOFTHETREADMILL

To vary the intensity of your exercise, the incline of the

treadmill can be changed. There are three different

incline settings. Before changing the incline, remove

the SAFEKEY and unplug the power cord.

To change the

incline, carefully

lay the treadmill

on its left side.

Remove the

incline pin from

the right incline

leg as shown.

_-Incline Pin

lncline Leg

Adjust the incline leg to the desired height and fully re-

insert the incline pin. Lay the treadmill on its right side.

Repeat the procedure for the left incline leg. CAUTION:

Before using the treadmill, make sure that both

incline pins are fully inserted at the same height. Do

not use the treadmill with the incline pins removed.

TROUBLE-SHOOTING AND STORAGE

Most treadmill problems can be solved by following the simple steps below. Find the symptom that

applies to your treadmill and follow the steps listed. If further assistance is needed, please call our

Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m.

Mountain Time (excluding holidays).

1. SYMPTOM: THE POWER DOES NOT TURN ON b. Make sure that the power cord is plugged in.

Make sure that the power cord is plugged into a

surge protector, and that the surge protector is

plugged into a property grounded outlet. (See

page 7.) Use only a UL-listed surge protector,

rated at 15 amps, with a 14-gauge cord of five feet

or less in length.

After the power cord has been plugged in, make

sure that the SAFEKEY is fully inserted into the

console. (See step I on page 8.)

Check the circuit breaker located on the treadmill

frame near the power cord. If the switch protrudes

as shown, the circuit breaker has tripped. To reset

the circuit breaker, wait for five minutes and then

press the switch back in.

c. Remove the SAFEKEY from the console. Reinsert

the SAFEKEY fully into the console.

3. SYMPTOM: THE DISPLAYS OF THE CONSOLE

DO NOT FUNCTION PROPERLY

a. Check the batteries in the console. (See assembly

step 4 on page 6.) Most problems are the result of

drained batteries.

4. SYMPTOM: THE WALKING BELT SLOWS WHEN

WALKED ON

a. Use only a UL-listed surge protector, rated at 15

amps, with a 14-gauge cord of five feet or less in

length.

Tripped Reset

2. SYMPTOM: THE POWER TURNS OFF DURING USE

a. Check the circuit breaker located on the treadmill

frame near the power cord. If the circuit breaker

has tripped, the switch will protrude. (See the

drawing above.) To reset the circuit breaker, wait

for five minutes and then press the switch back in.

b. If the walking belt is overtightened, treadmill per-

formance may decrease and the walking belt may

be permanently damaged. Remove the SAFEKEY

and UNPLUG THE POWER CORD. Using the

allen wrench, turn both rear roller adjustment bolts

counterclockwise, 1/4 of a turn (see the drawing

on the following page). When the walking belt is

properly tightened, you should be able to lift each

side of the walking belt 2 to 3 inches off the walk-

ing platform. The center of the walking belt should

just touch the walking platform. Be careful to keep

the walking belt centered. Plug in the power cord,

insert the SAFEKEY and run the treadmill for a

Andere Handbücher für CADENCE 850

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence 1020 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence M6 Elliptical Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence 5.0 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence 45 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence M6 Elliptical Bedienungsanleitung

Weslo

Weslo CARDIO STRIDE 4.0 Bedienungsanleitung

Weslo

Weslo CADENCE 55 WETL13606.0 Bedienungsanleitung

Weslo

Weslo Cadence 915 Bedienungsanleitung

Weslo

Weslo Cadence 8.0s Treadmill Bedienungsanleitung

Weslo

Weslo WLTL39112 Bedienungsanleitung

Weslo

Weslo WLTL19709.0 Bedienungsanleitung

Weslo

Weslo Cadence C 8 Treadmill Kurzanleitung

Weslo

Weslo WCTL29509.0 Bedienungsanleitung

Weslo

Weslo WLTL23580 Bedienungsanleitung

Weslo

Weslo CADENCE TS300 Bedienungsanleitung

Weslo

Weslo Compact XS WETL20708.0 Bedienungsanleitung

Weslo

Weslo Crosswalk Pro 14.2t Bedienungsanleitung

Weslo

Weslo Cadence 5.0 Treadmill Systemhandbuch

Weslo

Weslo CADENCE c22 Bedienungsanleitung

Weslo

Weslo CADENCE LX25 Bedienungsanleitung

Weslo

Weslo Cadence 1000 Fm Kurzanleitung

Weslo

Weslo Cadence S5 Treadmill Systemhandbuch

Weslo

Weslo Cadence 855 Bedienungsanleitung

Weslo

Weslo Cadence 935 Treadmill Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung