Weslo CADENCE AF 5.1 Bedienungsanleitung

USER'S MANUAL

Model No. WLTL29911.0

Serial No.

Write the serial number in the space

above for reference.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

QUESTIONS?

If you have questions, or if parts are

damaged or missing, DO NOT

CONTACT THE STORE; please

contact Customer Care.

IMPORTANT: Please register this

product (see the limited warranty

on the back cover of this manual)

before contacting Customer Care.

CALL TOLL-FREE:

1-866-699-3756

Mon.–Fri. 6 a.m.–6 p.m. MT

Sat. 8 a.m.–4 p.m. MT

ON THE WEB:

www.wesloservice.com

Serial Number

Decal

www.weslo.com

TABLE OF CONTENTS

WARNINGDECALPLACEMENT ..............................................................2

IMPORTANTPRECAUTIONS .................................................................3

BEFOREYOUBEGIN .......................................................................5

ASSEMBLY ...............................................................................6

OPERATIONANDAD USTMENT ............................................................10

HOWTOFOLDANDMOVETHETREADMILL ..................................................15

TROUBLESHOOTING ......................................................................16

EXERCISEGUIDELINES ...................................................................18

PARTLIST ...............................................................................19

EXPLODEDDRAWING .....................................................................20

ORDERINGREPLACEMENTPARTS ..................................................BackCover

LIMITEDWARRANTY...............................................................BackCover

WESLO is a registered trademark of ICON IP, Inc.

This drawing shows the location(s) of the warn-

ing decal(s). If a decal is missing or illegible,

call the telephone number on the front cover

of this manual and request a free replace-

ment decal. Apply the decal in the location

shown. Note: The decal(s) may not be shown at

actual size.

WARNING DECAL PLACEMENT

WARNING: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. ICON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

IMPORTANT PRECAUTIONS

1. Before beginning this or any exercise pro-

gram, consult your physician. This is espe-

cially important for persons over age 35 or

persons with pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Place the treadmill on a level surface, with at

least 8 ft. (2.4 m) of clearance behind it and 2

ft. (0.6 m) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under age 12 and pets away

from the treadmill at all times.

8. The treadmill should not be used by persons

weighing more than 250 lbs. (113 kg).

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women. Always wear athletic

shoes; never use the treadmill with bare feet,

wearing only stockings, or in sandals.

11. When connecting the power cord (see page 10),

plug the power cord into a surge suppressor

(not included) and plug the surge suppressor

into a grounded circuit capable of carrying 15

or more amps. No other appliance should be on

the same circuit. Do not use an extension cord.

12. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 10. To purchase a surge suppressor, see

your local WESLO dealer or call the telephone

number on the front cover of this manual and

order part number 146148, or see your local

electronics store.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may slow,

accelerate, or stop unexpectedly, which may

result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See TROU-

BLESHOOTING on page 16 if the treadmill is

not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 12).

17. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

18. The heart rate monitor is not a medical device.

Various factors, including your movement,

may affect the accuracy of heart rate readings.

The heart rate monitor is intended only as an

exercise aid in determining heart rate trends in

general.

19. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

20. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and press the power switch

into the off position when the treadmill is not

in use. (See the drawing on page 5 for the lo-

cation of the power switch.)

21. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6 and HOW TO FOLD

AND MOVE THE TREADMILL on page 15.)

You must be able to safely lift 45 lbs. (20 kg)

to raise, lower, or move the treadmill.

22. When folding or moving the treadmill, make

sure that the storage latch is holding the

frame securely in the storage position.

23. Do not change the incline of the treadmill by

placing objects under the treadmill.

24. Inspect and properly tighten all parts of the

treadmill regularly.

25. Never drop or insert any object into any

opening on the treadmill.

26. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized service

representative only.

27. This treadmill is intended for in-home use

only. Do not use this treadmill in any commer-

cial, rental, or institutional setting.

28. Over exercising may result in serious injury

or death. If you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

SAVE THESE INSTRUCTIONS

Thank you for selecting the new WESLO®

CADENCE AF 5.1 treadmill. The CADENCE AF 5.1

treadmill offers a selection of features designed to

make your workouts at home more effective. And

when youʼre not exercising, the unique treadmill can

be folded up, requiring less than half the floor space of

other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Storage Latch

Console

Key/Clip

Power Switch

Power Cord

Walking Belt

Hood

Wheel

Foot Rail

Idler Roller

Adjustment Screws

Platform Cushion

Length: 5 ft. 7 in. (170 cm)

Width: 2 ft. 5 in. (74 cm)

M8 Star

Washer (5)–6

M5 x 16mm

Screw (85)–2

M5 Star

Washer (7)–2

M4.2 x 19mm

Screw (10)–4

M10 x 58mm Bolt (2)–4

M4.2 x 18mm

Screw (58)–2

M10 Nut (73)–4

M8 x 15mm

Bolt (8)–6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly

requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of

the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated

with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt

or the shipping carton. This is normal and does not affect treadmill performance. If there is lubricant on top of the

walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver , adjustable

wrench , and needlenose pliers .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses

is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. To avoid dam-

aging parts, do not use power tools for assembly. Extra hardware may be included.

1. With the help of a second person, carefully tip

the treadmill onto its side. Unfold the Frame (51)

away from the Uprights (53, 54).

Orient the Base (52) as shown. Attach the Base

to the Left Upright (53) and the Right Upright

(54) with four M10 x 58mm Bolts (2) and four

M10 Nuts (73). Start all four Nuts, and then

tighten them.

With the help of a second person, carefully tip

the treadmill so that the Base (52) is flat on the

floor.

2. Set the console assembly face down on a soft

surface to avoid scratching it.

Identify the Right Handrail (33), which has a

large hole in the location shown. Hold the Right

Handrail near the console assembly.

Next, insert the console wire into the large hole

in the side of the Right Handrail (33). Using

needlenose pliers, carefully grasp the connector

and pull the console wire out of the hole near

the bracket on the Right Handrail.

2Console Wire

Console

Assembly

Connector

Large

Hole

Bracket

3. Set the Right Handrail (33) on the console as-

sembly. Make sure that the console wire is

not pinched. Remove the tie from the bracket

on the Right Handrail. If necessary, press the

Cage Nuts (101) back into place.

Start an M5 x 16mm Screw (85) with an M5 Star

Washer (7) into the Right Handrail, and then

start two M4.2 x 19mm Screws (10) into the

Right Handrail. Tighten the M5 x 16mm Screw

and then tighten the two M4.2 x 19mm

Screws; do not overtighten the Screws.

Attach the Left Handrail (not shown) to the

console assembly in the same way. Note:

There is no wire on the left side.

Console Wire

Console

Assembly

Wire Tie

5. Set the console assembly on the Uprights (53,

54). Make sure that no wires are pinched.

Start four M8 x 15mm Bolts (8) with four M8 Star

Washers (5) into the Uprights as shown. Do not

tighten the Bolts yet.

54 53

4. With the help of a second person, hold the con-

sole assembly near the Right Upright (54).

Connect the Wire Harness (39) to the console

wire. See the inset drawing. The connectors

should slide together easily and snap into

place. If they do not, turn one connector and try

again. IF YOU DO NOT CONNECT THE CON-

NECTORS PROPERLY, THE CONSOLE MAY

BECOME DAMAGED WHEN YOU TURN ON

THE POWER. If there is a wire tie on the Wire

Harness, remove the wire tie. Then, insert the

connectors and the excess wire downward into

the Right Upright (54).

101

39 Console

Wire

Console

Assembly

Console Assembly

Console

Wire

Bracket

6. Start an M8 x 15mm Bolt (8) with an M8 Star

Washer (5) into each Upright (53, 54). Then,

firmly tighten all six M8 x 15mm Bolts (8).

7. Attach the Latch Housing (48) to the Left Upright

(53) with two M4.2 x 18mm Screws (58); start

both Screws, and then tighten them.

8. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys

in a secure place. One of the hex keys is used to adjust the walking belt (see page 17). To protect the floor or

carpet, place a mat under the treadmill.

OPERATION AND AD USTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-

performance lubricant. IMPORTANT: Never apply sil-

icone spray or other substances to the walking

belt or the walking platform. Such substances will

cause excessive wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like other electronic equipment, can be

damaged by sudden voltage changes in your homeʼs

power. To decrease the risk of damaging your

treadmill, always use a surge suppressor with your

treadmill (see drawing 1 at the right). To purchase

a surge suppressor, see precaution 12 on page 3.

Use only a single-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have a

UL suppressed voltage rating of 400 volts or less

and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated for

120 volts AC and 15 amps. There must be a moni-

toring light on the surge suppressor to indicate

whether it is functioning properly. Failure to use a

properly functioning surge suppressor could dam-

age the control system of the treadmill (see precau-

tion 13 on page 3).

This product must be grounded. If it should malfunc-

tion or break down, grounding provides a path of least

resistance for electric current to reduce the risk of elec-

tric shock. This productʼs power cord has an equip-

ment-grounding conductor and a grounding plug. Plug

the power cord into a surge suppressor, and plug

the surge suppressor into an appropriate outlet

that is properly installed and grounded in accor-

dance with all local codes and ordinances.

IMPORTANT: The treadmill is not compatible with

GFCI-equipped outlets and may not be compatible

with AFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit

(see drawing 1). A temporary adapter may be used to

connect the surge suppressor to a 2-pole receptacle if

a properly grounded outlet is not available (see draw-

ing 2).

The temporary adapter should be used only until a

properly grounded outlet (see drawing 1) can be in-

stalled by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

The adapter must be held in place by a metal screw.

Some 2-pole receptacle outlet box covers are not

grounded. Contact a qualified electrician to deter-

mine if the outlet box cover is grounded before

using an adapter.

DANGER: Improper connection

of the equipment-grounding conductor in-

creases the risk of electric shock. Check with

a qualified electrician or serviceman if you

are unsure whether the product is properly

grounded. Do not modify the plug—if it will

not fit the outlet, have a proper outlet in-

stalled by a qualified electrician.

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

Grounding Plug

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Crosswalk 365e Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 900 Treadmill Bedienungsanleitung

Weslo

Weslo CADENCE 880 Bedienungsanleitung

Weslo

Weslo Cadence 8.0s Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 970 Bedienungsanleitung

Weslo

Weslo Cadence J2.8 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence G 7.0 Cwl Treadmill Einrichtungshandbuch

Weslo

Weslo Cadence 850 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 600 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence S5 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence M6 Elliptical Benutzerhandbuch

Weslo

Weslo Cadence 815 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 915 Kurzanleitung

Weslo

Weslo 925925 Bedienungsanleitung

Weslo

Weslo Cadence 720 Bedienungsanleitung

Weslo

Weslo Cadence 630 Bedienungs- und Wartungshandbuch

Weslo

Weslo WLTL29400 Bedienungsanleitung

Weslo

Weslo Cadence 2050 Bedienungsanleitung

Weslo

Weslo WCTL2932.2 Bedienungsanleitung

Weslo

Weslo Cadence 725 Bedienungsanleitung

Weslo

Weslo CADENCE c22 Bedienungsanleitung

Weslo

Weslo Pro Crosswalk 7.9 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 50 Ls Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence 1050 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung