Weslo WCTL35090 Bedienungsanleitung

USER'S MANUAL

QUESTIONS?

As a manufacturer, we are

committed to pro iding complete

customer satisfaction. If you

ha e questions, or if there are

missing or damaged parts, we

will guarantee complete satisfac-

tion through direct assistance

from our factory.

TO AVOID UNNECESSARY

DELAYS, PLEASE CALL DIRECT

TO OUR TOLL-FREE CUSTOMER

SERVICE DEPARTMENT. The

trained technicians on our hot

line will pro ide immediate assis-

tance, free of charge to you.

CUSTOMER SERVICE:

1-888-936-4266

Mon.–Fri., 8 a.m.–6:30 p.m. EST

(excluding holidays)

Model No. WCTL35090

Serial No.

Write the serial number in the

space above for future reference.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Sa e this manual

for future reference.

Serial

Number

Decal

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

TABLE OF CONTENTS

IMPORTANT PR CAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

B FOR YOU B GIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

ASS MBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

OP RATION AND ADJUSTM NT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

HOW TO FOLD AND MOV TH TR ADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

MAINT NANC AND TROUBL -SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

CONDITIONING GUID LIN S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

CUSTOM R R CORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

ORD RING R PLAC M NT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

LIMIT D WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

Note: A PART LIST and an XPLOD D DRAWING are attached in the center of this manual. Remove the PART

LIST and XPLOD D DRAWING before beginning assembly.

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described in this

manual.

3. Place the treadmill on a le el surface, with

eight feet of clearance behind it.

4. Do not place the treadmill on a surface that

blocks any air openings. To protect the floor

or carpet from damage, place a mat under the

treadmill.

5. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or co ered patio, or near water.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under the age of 12 and pets

away from the treadmill at all times.

8. The treadmill should not be used by persons

weighing more than 250 pounds.

9. Ne er allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothing when

using the treadmill. Do not wear loose

clothing that could become caught in the

treadmill. Athletic support clothes are recom-

mended for both men and women. Always

wear athletic shoes. Never use the treadmill

with bare feet, wearing only stockings, or in

sandals.

11. When connecting the power cord (see HOW

TO PLUG IN THE POWER CORD on page 8),

plug the power cord into a surge protector

(not included) and plug the surge protector

into a grounded circuit capable of carrying 15

or more amps. No other appliance should be

on the same circuit.

12. Use only a CUL-listed surge protector, rated

at 15 amps, with a 14-gauge cord of fi e feet

or less in length. Do not use an extension

cord.

13. Keep the power cord and the surge protector

away from heated surfaces.

14. Ne er mo e the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See

BEFORE YOU BEGIN on page 5 if the tread-

mill is not working properly.)

15. Ne er start the treadmill while you are stand-

ing on the walking belt.

16. Always hold the handrails while using the

treadmill.

17. The treadmill is capable of high speeds.

Adjust the speed in small increments to

a oid sudden jumps in speed.

18. Ne er lea e the treadmill unattended while it

is running. Always remo e the key when the

treadmill is not in use.

19. Do not attempt to raise, lower, or mo e the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6, and HOW TO MOVE

THE TREADMILL on page 12.) You must be

able to safely lift 45 pounds to raise, lower, or

mo e the treadmill.

20. When storing the treadmill, make sure that

the storage latch is fully closed.

21. Inspect and tighten all parts of the treadmill

e ery three months.

22. Ne er drop or insert any object into any

opening.

23. Do not attempt to modify the incline of the

treadmill by placing objects under the front

or rear of the treadmill.

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read

the following important precautions and information before operating the treadmill.

24. DANGER: Always unplug the power cord

immediately after use, before cleaning the

and before performing the maintenance and

adjustment procedures described in this

manual. Ne er remo e the motor hood

unless instructed to do so by an authorized

ser ice representati e. Ser icing other than

the procedures in this manual should be per-

formed by an authorized ser ice representa-

ti e only.

25. This treadmill is intended for in-home use

only. Do not use this treadmill in any com-

mercial, rental, or institutional setting.

26. The pulse sensor is not a medical de ice.

Various factors, including your mo ement,

may affect the accuracy of heart rate read-

ings. The sensor is intended only as an exer-

cise aid in determining heart rate trends in

general.

WARNING: Before beginning this or any exercise program, consult your physician.

This is especially important for persons o er the age of 35 or persons with pre-existing health prob-

lems. Read all instructions before using. ICON assumes no responsibility for personal injury or prop-

erty damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decal shown at the right has been

placed on your treadmill. If the decal is

missing, or if it is not legible, please call

our Customer Ser ice Department, toll-

free, to order a free replacement decal

(see ORDERING REPLACEMENT PARTS

on page 19 of this manual). Apply the

decal in the location shown.

BEFORE YOU BEGIN

Thank you for selecting the W SLO®CAD NC DX10

treadmill. The CAD NC DX10 combines advanced

technology with innovative design to let you enjoy an

excellent form of cardiovascular exercise in the conve-

nience and privacy of your home. And when you’re not

exercising, the CAD NC DX10 can be folded up, re-

quiring less than half the floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have additional questions,

please call our Customer Service Department toll-free

at 1-888-936-4266, Monday through Friday, 8 a.m.

until 6:30 p.m. astern Standard Time (excluding holi-

days). To help us assist you, please note the product

model number and serial number before calling. The

model number of the treadmill is WCTL35090. The

serial number can be found on a decal attached to the

treadmill (see the front cover of this manual for the

location).

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

Handrails

Console

Storage Latch

Speed Control

Key/Clip

Circuit Breaker

Walking Belt

Foot Rails

Incline Leg

Power Cord

FRONT

BACK

RIGHT SIDE

Rear Roller

Adjustment Bolts

Water Bottle Holder

(bottle not included)

Accessory Tray

Uprights

1. Note that the right Handrail and the Console Base

(not shown) are connected to the treadmill by a Wire

Harness. During assembly steps 1 through 5, be

careful not to pull on or damage the Wire Harness.

With the help of a second person, carefully lay the

treadmill on its side. Position one of the Base Legs

(38) on the base of the Upright (31) as shown. Make

sure that the Base Leg Pads (41) and the Front

Wheel (39) are in the indicated positions. Attach the

Base Leg with two 3/8” x 2” Bolts (43), two 3/8”

Washers (44) and two 3/8” Nuts (34).

Carefully turn the treadmill onto its other side.

Assemble the other Base Leg (38) as described.

With the help of a second person, carefully raise the

treadmill to the upright position so the Base Legs

(38) are resting flat on the floor.

2. Refer to HOW TO LOW R TH TR ADMILL FOR

US on page 12. Follow the instructions in step 2 to

lower the treadmill.

Cut the plastic ties that hold the cage nuts in each

Handrail (32).

Position the left Handrail (32) on the left Upright

(31). Thread a 1/4” x 1” Bolt (23) with a 1/4” Washer

(22) two turns into the upper end of the left Upright

and the left Handrail. Do not tighten the Bolt yet.

Thread a 1/4” x 1” Bolt (23) with a 1/4” Washer (22)

two turns into the lower end of the left Handrail (32)

and the left Upright (31). Do not tighten the Bolt

yet.

143

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Assembly requires your own phillips screw-

dri er , two adjustable wrenches , and scissors .

3. With the help of a second person, hold the Console

Base (12) and the right Handrail (32) near the right

Upright (31) as shown. Feed the excess Wire

Harness (28) into the right Handrail (32) and then

insert it down the right Upright. Next, insert the

bracket on the right Handrail into the right Upright.

Be careful not to pinch the Wire Harness.

Bracket

32 31

4. Thread a 1/4” x 1” Bolt (23) with a 1/4” Washer (22)

two turns into the upper end of the right Upright (31)

and the right Handrail (32). Do not tighten the Bolt

yet.

Thread a 1/4” x 1” Bolt (23) with a 1/4” Washer (22)

two turns into the lower end of the right Handrail (32)

and the right Upright (31). Do not tighten the Bolt

yet.

5. Set the Console Base (12) on the Handrails (32).

Make sure that the Wire Harness (28) is out of the

way as you loosely thread four Console Base

Screws (91) into the Handrails and the Console

Base. Next, push the Wire Harness down the right

Upright (31). It may be necessary to pull the Wire

Harness out the bottom of the right Upright.

Tighten all parts used in steps 2 and 5. Then,

tighten the Console Base Screws (91) used in

this step.

8. Make sure that all parts are tight before you use

the treadmill. Note: The ratchet screws shown at the

right are factory set and should not be adjusted.

Some parts may be left over after assembly is com-

pleted. To protect the floor or carpet from damage,

place a mat under the treadmill.

Ratchet

Screws

6. Attach the Frame Guide (94) and the Frame Guide

Spacer (71) to the left side of the Frame (76) with

four Screws (48). Note: Be careful not to o er-

tighten the Screws. Make sure that the thick end

of the Frame Guide is at the bottom.

7. Remove the backing from the Wrench Clip (51).

Press the Wrench Clip onto the base of the right

Upright (31) in the indicated location. Press the Allen

Wrench (90) into the Wrench Clip.

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBETM WALKING BELT

Your treadmill features a walking belt coated with

P RFORMANT LUB TM, a high-performance lubricant.

IMPORTANT: Ne er apply silicone spray or other

substances to the walking belt or the walking plat-

form. They will deteriorate the walking belt and

cause excessi e wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like any other type of sophisticated

electronic equipment, can be seriously damaged by

sudden voltage changes in your home’s power.

Voltage surges, spikes, and noise interference can

result from weather conditions or from other appli-

ances being turned on

or off. To decrease the

possibility of your

treadmill being dam-

aged, always use a

surge protector (not

included) with your

treadmill.

Surge protectors are

sold at most hardware

stores and department

stores. Use only a CUL-

listed surge protector,

rated at 15 amps, with

a 14-gauge cord of five

feet or less in length.

This product must be

grounded. If it should

malfunction or break

down, grounding pro-

vides a path of least

resistance for electric

current to reduce the

risk of electric shock. This product is equipped with a

cord having an equipment-grounding conductor and a

grounding plug. Plug the power cord into a surge

protector, and plug the surge protector into an

appropriate outlet that is properly installed and

grounded in accordance with all local codes and

ordinances.

This product is for use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus-

trated in drawing 1 below. A temporary adapter that

looks like the adapter illustrated in drawing 2 may be

used to connect the surge protector to a 2-pole recep-

tacle as shown in drawing 2 if a properly grounded

outlet is not available.

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed

by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet

box co ers are not grounded. Contact a qualified

electrician to determine if the outlet box co er is

grounded before using an adapter.

DANGER:Improper connection

of the equipment-grounding conductor can

result in an increased risk of electric shock.

Check with a qualified electrician or ser ice-

man if you are in doubt as to whether the

product is properly grounded. Do not modify

the plug pro ided with the product—if it will

not fit the outlet, ha e a proper outlet

installed by a qualified electrician.

Grounded Outlet Box

Grounding Plug

Treadmill Power Cord

Grounding Plug

Grounding Pin

Surge Protector

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

Clip

Pulse Sensor

Key

Speed Control

Displays

DIAGRAM OF THE CONSOLE

On/Reset Button

BATTERY INSTALLATION

The console requires three "AA" batteries (not includ-

ed); alkaline batteries are recommended. Open the

battery cover and press the batteries into the console;

the negative (–) ends of the batteries must touch the

springs. Close the battery cover, push up on the tab,

and then push the tab forward as shown in the inset

drawing. Be sure that the tab locks into place.

STEP BY STEP CONSOLE OPERATION

Before operating the console, make sure that the

power cord is properly plugged in. (See HOW TO

PLUG IN TH POW R CORD on page 8.) In addition,

make sure that batteries are installed in the console. If

there is a thin sheet of clear plastic on the console,

remove it.

Step onto the foot rails of the treadmill. Next, find the

clip attached to the key (see the drawing above). Slide

the clip onto your waistband.

Follow the steps below and on page 10 to operate the

console.

Insert the key fully into the power switch.

Note: Inserting the key

will not turn on the dis-

plays. The displays will

turn on when the dis-

play on/reset button is

pressed or when the

walking belt is started.

If you just installed bat-

teries, the displays will

already be on.

CAUTION:Before operating the

console, read the following precautions.

• Do not stand on the walking belt when turn-

ing on the power.

• Always wear the clip (see the drawing

abo e) while operating the treadmill. When

the key is remo ed from the console, the

walking belt will stop.

• Adjust the speed in small increments.

• To reduce the possibility of electric shock,

keep the console dry. A oid spilling liquids

on the console and use only a sealable

water bottle.

Battery Cover Tab

Batteries

Battery

Cover

Reset the console and start the walking belt.

Slide the speed control to

the R S T position. Note:

Each time the walking

belt is stopped, the speed

control must be mo ed to

the RESET position

before the walking belt

can be restarted.

Next, slowly slide the speed control until the walk-

ing belt begins to move at slow speed. Carefully

step onto the walking belt and begin exercising.

Change the speed of the walking belt as desired

by moving the speed control.

To stop the walking belt, step onto the foot rails

and slide the speed control to the R S T posi-

tion.

Follow your progress with the three displays.

TIME/DISTANCE dis-

play—This display

shows the elapsed

time and the distance

that you have walked

or run, in miles per

hour.

SPEED display—This

display shows the

speed of the walking

belt, in miles per hour.

CALORIES/FAT

CALORIES/PULSE

display—This display

shows the approxi-

mate numbers of calo-

ries and fat calories

you have burned. (See FAT BURNING on page

15.) very seven seconds, the display will change

from one number to the other, as indicated by the

mode arrows. This display also shows your pulse

when the pulse sensor is used (see step 4).

The displays can be

reset, if desired, by

pressing the display

on/reset button.

Measure your pulse, if desired.

To measure your pulse,

stand on the foot rails

and place your thumb

on the pulse sensor as

shown. The pulse sen-

sor is pressure activat-

ed—fully press it down.

Do not press too hard,

or the circulation in

your thumb will be

restricted, and your

pulse will not be

detected. Next, raise

your thumb slightly until

the heart-shaped indicator in the pulse display

flashes steadily. Hold your thumb at this level.

After a few seconds, three dashes will appear in

the display and your pulse will be shown. Hold

your thumb on the sensor for another 15 seconds

for the most accurate reading.

If the displayed pulse appears to be too high or

too low, or if your pulse is not displayed, lift your

thumb off the sensor and allow the display to

reset. Press down again on the sensor as

described above. Make sure that your thumb is

positioned as shown, and that you are applying the

proper amount of pressure to the pulse sensor. Try

the sensor several times until you become familiar

with it. Remember to stand still while measuring

your pulse.

Turn off the power.

To turn off the power, simply wait for about

four minutes. If the walking belt is stationary and

the console buttons are not pressed for four min-

utes, the power will turn off automatically.

Pulse

Sensor

Pulse Indicator

Mode Arrow

Dieses Handbuch passt für folgende Modelle

Andere Weslo Tretmühle Handbücher

Weslo

Weslo WLTL29011 Bedienungsanleitung

Weslo

Weslo Cadence 3280 Bedienungsanleitung

Weslo

Weslo Easy compact 2 treadmill Bedienungsanleitung

Weslo

Weslo Cadence 840 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 925 Bedienungsanleitung

Weslo

Weslo G-30 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence C6 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 450v Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 2300 Bedienungsanleitung

Weslo

Weslo Cadence 50 Ls Kurzanleitung

Weslo

Weslo WLTL19012 Bedienungsanleitung

Weslo

Weslo Cadence S6 Treadmill Benutzerhandbuch

Weslo

Weslo WLTL22190 Bedienungsanleitung

Weslo

Weslo Cadence 70 Treadmill Bedienungsanleitung

Weslo

Weslo WLTL19709.0 Bedienungsanleitung

Weslo

Weslo Cadence Ts5 Bedienungsanleitung

Weslo

Weslo Cadence M6 Elliptical null

Weslo

Weslo Cadence 5.0 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence R 7.2 Treadmill Bedienungsanleitung

Weslo

Weslo WLTL10091 Bedienungsanleitung

Weslo

Weslo Cadence C6 Treadmill Referenzhandbuch

Weslo

Weslo CardioStrite Plus WETL01540 Bedienungsanleitung

Weslo

Weslo Cadence S 8 Bedienungs- und Wartungshandbuch

Weslo

Weslo WETL49710.2 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung