Weslo Crosswalk 365e Treadmill Bedienungsanleitung

Model No. WCTL95335.0

Serial No.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

TREADMILL EXERCISER

User’s Manual

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if there are

missing parts, please call:

1-888-936-4266

Monday through Friday 8:00 to

17:00 EST (excluding holidays).

Serial Number

Decal

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.

WESLO is a registered trademark of ICON IP, Inc.

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described.

3. Place the treadmill on a level surface, with at

least 2 m (8 ft.) of clearance behind it and 0.5

m (2 ft.) on each side. Do not place the tread-

mill on any surface that blocks air openings.

To protect the floor or carpet from damage,

place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

6. Keep children under the age of 12 and pets

away from the treadmill at all times.

7. The treadmill should be used only by persons

weighing 115 kg (250 lbs.) or less.

8. Never allow more than one person on the

treadmill at a time.

9. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women. Always wear athletic

shoes. Never use the treadmill with bare feet,

wearing only stockings, or in sandals.

10. When connecting the power cord (see page 10),

plug the power cord into a surge suppressor

(not included) and plug the surge suppressor

into a grounded circuit capable of carrying 15

or more amps. No other appliance should be on

the same circuit. Do not use an extension cord.

11. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 10.

12. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may change

speed, accelerate, or stop unexpectedly,

which may result in a fall and serious injury.

13. Keep the power cord and the surge suppres-

sor away from heated surfaces.

14. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See BE-

FORE YOU BEGIN on page 5 if the treadmill is

not working properly.)

15. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

16. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

17. The pulse sensor is not a medical device.

Various factors, including your movement,

may affect the accuracy of heart rate readings.

The sensor is intended only as an exercise aid

in determining heart rate trends in general.

18. Do not use the hand weights at speeds faster

than walking speeds. Using weights and not

holding the handrails may compromise your

ability to maintain your balance. Exercises

using weights should be attempted only by

experienced users.

19. Never leave the treadmill unattended while it

is running. Always remove the key and unplug

the power cord when the treadmill is not in

use.

20. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6, and HOW TO FOLD

AND MOVE THE TREADMILL on page 14.)

You must be able to safely lift 20 kg (45 lbs.) to

raise, lower, or move the treadmill.

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

21. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

22. Inspect and properly tighten all parts of the

treadmill regularly.

23. Never insert any object into any opening.

24. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the

maintenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized ser-

vice representative only.

25. This treadmill is intended for in-home use

only. Do not use this treadmill in a commer-

cial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. Sears assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown have been placed on your

treadmill. If a decal is missing, or if it is not

legible, please call toll-free 1-888-936-4266

and order a free replacement decal. Apply

the decal in the location shown. Note: The

decals are not shown at actual size.

Thank you for selecting the new WESLO®CROSS-

WALK 365e treadmill. The CROSSWALK 365e treadmill

combines advanced technology with innovative design

to help you get the most from your exercise in the con-

venience of your home. And when you’re not exercising,

the CROSSWALK 365e treadmill can be folded up, re-

quiring less than half the floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have questions after read-

ing this manual, see the front cover of this manual. To

help us assist you, please note the product model num-

ber and serial number before calling. The model number

of the treadmill is WCTL95335.0. The serial number can

be found on a decal attached to the treadmill (see the

front cover of this manual for the location).

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Upright

Storage Latch

Key/Clip

Reset/Off

Circuit Breaker

Walking Belt

Cushioned Walking Platform

for maximum exercise comfort

Foot Rail

Power Cord

RIGHT SIDE

Rear Roller

Adjustment Bolts

Console

Bookrack

Watter Bottle Holder

(bottle not included)

BACK

Upper Body Arms

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a

small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal

condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off

the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches and your own phillips screwdriver ,

and rubber mallet .

For help identifying the assembly hardware, see the drawings below. If a part is not in the parts bag, first

check to see if it has been pre-assembled.

3/4” Screw (43)–12

Silver Ground

Screw (99)–1

Handrail Bolt (44)–2

1/2” Screw (97)–4

Extension Leg Screw (14)–2

Star Washer (25)–4

1. With the help of a second person, raise the Uprights (38)

to the position shown.

Next, insert one of the Extension Legs (15) into the

treadmill as shown; make sure that the Extension Leg is

turned so the Base Pad (33) is underneath it. Note: It

may be helpful to tip the Uprights (38) in the direction

shown by the arrow as you insert the Extension Leg.

Attach the Extension Leg (15) with an Extension Leg

Screw (14). Make sure to push on the head of the

Extension Leg Screw while tightening it.

Attach the other Extension Leg (not shown) in the

same way.

2. Insert the tab on one of the Handrail Brackets (17) into the

slot in the right Upright (38). Attach the Handrail Bracket

with a 3/4” Screw (43) and a Star Washer (25). Attach

the other Handrail Bracket to the left Upright (not

shown) in the same way.

Slot

3. Identify the Right Handrail (16), which has a large hole in

the left side. Feed the Wire Harness (53) into the hole in

the bottom of the Right Handrail and out of the large hole

in the side. Note: It may be helpful to use needlenose pli-

ers to pull the Wire Harness out of the hole.

Press a Handrail Cap (103) onto the lower end of the

Right Handrail (16) as shown. Set the Right Handrail on

the right Upright (38), while sliding the lower end of the

Right Handrail onto the Handrail Bracket (17). Attach the

Right Handrail with an Upright Bolt (44) in the upper end

and a 3/4” Screw (43) and a Star Washer (25) in the

lower end.

Attach the Left Handrail (4) in the same way. Note:

There is not a wire harness on the left side.

53 Hole

103

Hole

4. Attach the ground wire to the small hole in the side of the

Right Handrail (16) with a Silver Ground Screw (99).

Ground

Wire

6. Hold the Console (11) near the Console Base (87).

Touch the Right Handrail (16) to discharge any static.

See the inset drawing. Find the 2-wire connector on the

end of the Wire Harness (53). Insert the connector into

the red connector beneath the Console. The connectors

should slide together easily and snap into place. If

they do not, turn the connector and then insert it. Insert

the 6-wire connector into the socket beneath the Console

the same way.

Insert the excess Wire Harness (53) down through the

opening in the Console Base (87 [see the inset drawing

in step 5]). Securely tighten the plastic tie on top of

the Console Base to prevent the Wire Harness from

slipping. Then, cut off the end of the plastic tie.

Make sure that the connectors and wires appear as

shown at the right. IF THE CONNECTORS ARE NOT

INSERTED PROPERLY, THE CONSOLE MAY BE

DAMAGED WHEN THE POWER IS TURNED ON.

See drawing 6a. Press the Bookrack (85) onto the Console

Base (87) in the location shown.

Set the Console (11) on the Console Base (87). Insert

the excess Wire Harness (53) into the large hole in the

side of the Right Handrail (16). Securely tighten the

plastic ties on the bottom of the Console Base to

prevent the Wire Harness from slipping. Then, cut off

the ends of the plastic ties.

Attach the Console (11) to the Console Base (87) with two

3/4” Screws (43) and four 1/2” Screws (97).Start all six

Screws before tightening them; do not overtighten

the Screws. Tighten the two Crossbar Screws (98) (only

one is shown).

43 43

98 97

Ties

6-wire

2-wire

Ties

5. Loosen the two (one shown) Crossbar Screws (98) sev-

eral turns. Place the Console Base (87) on the Right

Handrail (16) and the Left Handrail (not shown). Make

sure that the Wire Harness is not pinched in the Right

Handrail. Attach the Console Base with four 3/4” Screws

(43) (only two Screws are shown). Start all four 3/4”

Screws before tightening them.

Insert the Wire Harness (53) through the two indicated

plastic ties on the Console Base (87). Next, insert the

Wire Harness up through the opening beside the Wire

Cover (10). Make sure that the Wire Cover is securely at-

tached to the Console Base.

See the inset drawing. Look at the top of the Console

Base (87). Insert the Wire Harness (53) through the plas-

tic tie on top of the Console Base.

Tie

8. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may

be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the

walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.

7. Attach the Storage Latch (66) to the left Upright (38) with

two 3/4” Screws (43) as shown. Do not overtighten the

Screws.

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-

performance lubricant. IMPORTANT: Never apply sil-

icone spray or other substances to the walking

belt or the walking platform. Such substances will

deteriorate the walking belt and cause excessive

wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like any other type of sophisticated

electronic equipment, can be seriously damaged by

sudden voltage changes in your home’s power.

Voltage surges, spikes, and noise interference can

result from weather conditions or from other appliances

being turned on or off. To decrease the possibility of

your treadmill being damaged, always use a surge

suppressor with your treadmill (see drawing 1 at

the right).

Use only a single-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have a

UL suppressed voltage rating of 400 volts or less

and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated for

120 volts AC and 15 amps. There must be a moni-

toring light on the surge suppressor to indicate

whether it is functioning properly. Failure to use a

properly functioning surge suppressor could result

in damage to the control system of the treadmill. If

the control system is damaged, the walking belt

may change speed, accelerate, or stop unexpect-

edly, which may result in a fall and serious injury.

This product must be grounded. If it should malfunc-

tion or break down, grounding provides a path of least

resistance for electric current to reduce the risk of elec-

tric shock. This product is equipped with a cord having

an equipment-grounding conductor and a grounding

plug. Plug the power cord into a surge suppressor,

and plug the surge suppressor into an appropriate

outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Important: The treadmill is not compatible with

GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus-

trated in drawing 1 below. A temporary adapter that

looks like the adapter illustrated in drawing 2 may be

used to connect the surge suppressor to a 2-pole

receptacle as shown in drawing 2 if a properly

grounded outlet is not available.

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed

by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet box

covers are not grounded. Contact a qualified elec-

trician to determine if the outlet box cover is

grounded before using an adapter.

DANGER: Improper connection

of the equipment-grounding conductor can

result in an increased risk of electric shock.

Check with a qualified electrician or service-

man if you are in doubt as to whether the

product is properly grounded. Do not modify

the plug provided with the product—if it will

not fit the outlet, have a proper outlet

installed by a qualified electrician.

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

Andere Handbücher für Crosswalk 365e Treadmill

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence C6 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 300 Bedienungsanleitung

Weslo

Weslo Cadence Dx15 Bedienungsanleitung

Weslo

Weslo WLTL29010 Bedienungsanleitung

Weslo

Weslo Cadence 830 Bedienungsanleitung

Weslo

Weslo Cadence 90 Treadmill Bedienungsanleitung

Weslo

Weslo Lyne 3500 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence M6 Elliptical Bedienungsanleitung

Weslo

Weslo WLTL48410 Bedienungsanleitung

Weslo

Weslo Crosswalk 5.2t Treadmill Bedienungsanleitung

Weslo

Weslo CADENCE TS300 Bedienungsanleitung

Weslo

Weslo Cadence 600 Treadmill Kurzanleitung

Weslo

Weslo Cadence 620 WETL20000 Bedienungsanleitung

Weslo

Weslo Cadence G-40 Treadmill Bedienungsanleitung

Weslo

Weslo WCTL35090 Bedienungsanleitung

Weslo

Weslo Cadence J3.8 Treadmill Bedienungsanleitung

Weslo

Weslo WCTL39110 Bedienungsanleitung

Weslo

Weslo Cadence 915 Kurzanleitung

Weslo

Weslo Cadence 890 Bedienungsanleitung

Weslo

Weslo Cadence 935 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence S6 Treadmill Bedienungsanleitung

Weslo

Weslo Easy compact 2 treadmill Bedienungsanleitung

Weslo

Weslo Cadence 400cs Treadmill Bedienungsanleitung

Weslo

Weslo Cadence ex14 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung