Weslo WCTL84090 Bedienungsanleitung

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

USER'S MANUAL

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete cus-

tomer satisfaction. If you have

questions, or find that there are

missing or damaged parts, we

will guarantee you complete sat-

isfaction through direct assis-

tance from our factory.

TO AVOID UNNECESSARY

DELAYS, PLEASE CALL DIRECT

TO OUR TOLL-FREE CUSTOMER

HOT LINE. The trained techni-

cians on our Customer Hot Line

will provide immediate assis-

tance, free of charge to you.

CUSTOMER HOT LINE:

1-888-936-4266

Mon.–Fri. 8 am–6:30 pm EST

(excluding holidays)

Model No. WCTL84090

Serial No.

Serial

Number

Decal

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

TROUBLE-SHOOTING AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

CUSTOMER RECORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described in this

manual.

3. Place the treadmill on a level surface, with

eight feet of clearance behind it. Do not

place the treadmill on any surface that

blocks air openings. To protect the floor or

carpet from damage, place a mat under the

treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

6. The roller guards should be 1/8” from the

rear roller. Adjust the position of the roller

guards, if necessary. (The drawing on page

5 shows the location of the roller guards.)

7. Keep children under 12 and pets away from

the treadmill at all times.

8. The treadmill should not be used by persons

weighing more than 250 pounds. Never

allow more than one person on the treadmill

at a time.

9. When connecting the power cord (see HOW

TO PLUG IN THE POWER CORD on page 8),

plug the power cord into a surge protector

(not included) and plug the surge protector

into a grounded circuit capable of carrying

15 or more amps. No other appliance should

be on the same circuit.

10. Use only a CUL-listed surge protector, rated

at 15 amps, with a 14-gauge cord of five feet

or less in length. Do not use an extension

cord.

11. Keep the power cord and the surge protec-

tor away from heated surfaces.

12. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See

BEFORE YOU BEGIN on page 5 if the tread-

mill is not working properly.)

13. Wear appropriate exercise attire when using

the treadmill. Do not wear loose clothing

that could become caught in the treadmill.

Athletic support clothes are recommended

for both men and women. Always wear ath-

letic shoes. Never use the treadmill with

bare feet, wearing only stockings, or in san-

dals.

14. Never start the treadmill while you are

standing on the walking belt. Always hold

the handrails while exercising on the tread-

mill.

15. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

16. Adjust the speed in small increments.

17. Never leave the treadmill unattended while it

is running. Always remove the key when the

treadmill is not in use.

18. To change the incline level of the treadmill,

refer to the instructions on page 11. Do not

use the treadmill with the incline pins

removed.

19. Inspect and tighten all parts of the treadmill

every three months.

20. Never drop or insert any object into any

opening.

WARNING: To reduce the risk of burns, fire, electric shock or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

The decal shown at the right has been

placed on the water bottle holder of the

treadmill.

If the decal is missing, or if it is not legi-

ble, please call our Customer Service

Department, toll-free, to order a free

replacement decal (see ORDERING

REPLACEMENT PARTS on page 19 of

this manual). Apply the decal in the loca-

tion shown.

21. Always unplug the power cord before per-

forming the maintenance and adjustment

procedures described in this manual. Never

remove the motor hood unless instructed to

do so by an authorized service representa-

tive. Servicing other than the procedures in

this manual should be performed by an

authorized service representative only.

22. This treadmill is intended for in-home use

only. Do not use this treadmill in any com-

mercial, rental, or institutional setting.

SAVE THESE INSTRUCTIONS

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

BEFORE YOU BEGIN

Handrails

Accessory Tray

Key/Clip

Motor Hood

Upright

Pulse Sensor

Water Bottle Holder

(Bottle is not included)

Towel Rack

Circuit Breaker

Walking Belt

Roller Guards

Foot Rails

Power Cord

Hitch Pin

Rear Roller

Adjustment Bolts Note: The rear leg pad may mark some types of linoleum.

Mild household cleaning agents will remove any marks.

FRONT

BACK

RIGHT SIDE

Rear Leg Pads

Thank you for selecting the WESLO®CADENCE 840

treadmill. The CADENCE 840 treadmill blends

advanced technology with innovative design to offer

you an excellent form of cardiovascular exercise, in the

convenience and privacy of your home.

For your benefit, read this manual carefully before

using the treadmill. If you have additional questions,

please call our Customer Service Department, toll-free,

at 1-888-936-4266, Monday through Friday, 8:00 a.m.

until 6:30 p.m. Eastern Standard Time (excluding holi-

days). To help us assist you, please note the product

model number and serial number before calling. The

model number of the treadmill is WCTL84090. The

serial number can be found on a decal attached to the

treadmill (see the front cover of this manual for the

location).

Before reading further, please review the drawing

below and familiarize yourself with the parts that are

labeled.

Console

Flange Nut (54)–2

3/8" x 1 1/2" Washer

(27)–1

5/16" x 3" Bolt (71)–2

3/8" x 1" Bolt (7)–3

1. Raise the Upright (20) to the vertical position. Slide the

3/8” x 1 1/2” Washer (27) onto a 3/8” x 1” Bolt (7). Insert

the Bolt into the lower end of the Upright. Finger tighten

the Bolt into the Frame (46).

2. If there are plastic ties in the upper ends of the Handrails

(1), cut them off. Insert the upper end of one of the

Handrails into the Console Housing (4). (Note: The two

Handrails are identical. Due to the manufacturing

process, there is a dimple near the lower end of each

Handrail. It makes no difference which side the dimple is

on when the Handrails are assembled.) Finger tighten a

3/8” x 1” Bolt (7) into the plate under the Console Housing

(4) and into the Handrail.

Attach the other Handrail (1) in the same manner.

3. Insert a 5/16” x 3” Bolt (71) into the lower end of the right

Handrail (1) and the Frame (46). Reach under the Frame

and tighten a Flange Nut (54) onto the Bolt.

Attach the other Handrail (not shown) in the same man-

ner. Tighten all Bolts used in steps 1 through 3.

ASSEMBLY

Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until

assembly is completed. Refer to the drawings below to identify the small parts used in assembly.

Assembly requires a standard screwdriver and an adjustable wrench (not

included).

4. Remove the paper backing from the Adhesive Clip (16).

Press the Adhesive Clip onto the Right Endcap (45) in the

indicated location. Press the Allen Wrench (41) into the

Adhesive Clip.

5. The Console (5) requires two "AA" batteries (not

included); alkaline batteries are recommended.

Slide up the Battery Cover (36). Press two batteries into

the battery compartment, with the negative (–) ends of the

batteries touching the springs. Close the Battery Cover.

Batteries

6. Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet from dam-

age, place a mat beneath the treadmill.

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBETM WALKING BELT

Your treadmill features a walking belt coated with

PERFORMANT LUBETM, a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other

substances to the walking belt or the walking plat-

form. They will deteriorate the walking belt and

cause excessive wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like any other type of sophisticated

electronic equipment, can be seriously damaged by

sudden voltage changes in your home’s power.

Voltage surges, spikes, and noise interference can

result from weather con-

ditions or from other

appliances being turned

on or off. To decrease

the possibility of your

treadmill being dam-

aged, always use a

surge protector (not

included) with your

treadmill.

Surge protectors are

sold at most hardware

stores and department

stores. Use only a CUL-

listed surge protector,

rated at 15 amps, with a

14-gauge cord of five

feet or less in length.

This product must be

grounded. If it should

malfunction or break

down, grounding pro-

vides a path of least

resistance for electric current to reduce the risk of elec-

tric shock. This product is equipped with a cord having

an equipment-grounding conductor and a grounding

plug. Plug the power cord into a surge protector,

and plug the surge protector into an appropriate

outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

This product is for use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus-

trated in drawing 1 below. A temporary adapter that

looks like the adapter illustrated in drawing 2 may be

used to connect the surge protector to a 2-pole recep-

tacle as shown in drawing 2 if a properly grounded out-

let is not available.

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed

by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet box

covers are not grounded. Contact a qualified elec-

trician to determine if the outlet box cover is

grounded before using an adapter.

DANGER: Improper connection

of the equipment-grounding conductor can

result in an increased risk of electric shock.

Check with a qualified electrician or service-

man if you are in doubt as to whether the

product is properly grounded. Do not modify

the plug provided with the product—if it will

not fit the outlet, have a proper outlet

installed by a qualified electrician.

Grounded Outlet Box

Grounding Plug

Treadmill Power Cord

Grounding Plug

Grounding Pin

Surge Protector

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

STEP BY STEP CONSOLE OPERATION

Before operating the console, make sure that the

power cord is properly plugged in. (See HOW TO

PLUG IN THE POWER CORD on page 8.)

Next, step onto the foot rails of the treadmill. Find the

clip attached to the key (see the drawing above), and

slide the clip onto the waistband of your clothing.

Follow the steps at the right and on page 10 to operate

the console.

Insert the key fully into the power switch.

Note: The displays will not be activated when the

key is first inserted, unless batteries were just

installed.

Press the on/off button.

The two displays

will be activated.

Note: If batteries

were just installed,

the displays will

already be activat-

ed.

Reset the speed control and start the walking

belt.

Slide the speed

control fully to

the left, to the

"RESET" posi-

tion. Next, slide

the control to

the right until

the walking belt begins to move at slow speed.

Carefully step onto the walking belt and begin

walking. Change the speed of the walking belt as

desired by sliding the speed control knob.

To stop the walking belt, slide the speed control to

the "RESET" position.

CAUTION: Before operating the

console, read the following important precau-

tions.

• Do not stand on the walking belt when turn-

ing on the power.

• Always wear the clip while operating the

treadmill. When the key is removed from the

console, the power will shut off.

• After the speed control knob is moved, there

will be a pause before the walking belt begins

to move. Adjust the speed in small incre-

ments until you are familiar with the treadmill.

• To reduce the risk of electric shock, keep

the console dry, avoid spilling liquids on the

console, and use only a sealed water bottle.

DIAGRAM OF THE CONSOLE

Key

Speed Control

Pulse Sensor

Monitor Display Pulse Display

Clip

Note: If there is a thin sheet of clear

plastic on the face of the console,

remove it.

On/Off

Button

Mode

Button

Press the mode button to select the desired

monitor mode.

The monitor features five different modes to

provide instant exercise feedback:

Speed—displays your speed, in miles per hour.

Time—displays the elapsed time.

Distance—displays the distance that you have

walked or run, in miles.

Calorie—displays the approximate number of

calories you have burned. Note: The actual num-

ber of Calories you have burned may differ

slightly from the number displayed if the speed or

incline is near the lowest or highest setting.

Scan—displays the speed, time, distance, and

calorie modes, for five seconds each, in a

repeating cycle.

When the power

is turned on, the

scan mode will

automatically be

selected. One

mode indicator

will appear by the

scan symbol, and a second mode indicator will

show which mode is currently displayed.

If desired, the

speed, time, dis-

tance or calorie

mode can be dis-

played continu-

ously. Press the

mode button

repeatedly until a

mode indicator

appears by the

desired mode

symbol. Make sure that there is not a mode indi-

cator by the scan symbol.

Note: The monitor displays can be reset by press-

ing the on/reset button twice.

Measure your pulse, if desired.

To use the pulse sensor, stand on the foot rails

and place your thumb on the pulse sensor as

shown. The pulse sensor is pressure-activated—

Fully press it

down. Do not

press too hard,

or the circula-

tion in your

thumb will be

restricted, and

your pulse will

not be detected.

Next, slightly

raise your thumb

until the heart-

shaped indicator

in the pulse dis-

play flashes

steadily. Hold your thumb at this level. After 5 to

10 seconds, your pulse will be displayed.

If an “H” (high) or an “L” (low) is displayed after 10

seconds, or if your pulse is not displayed, lift your

thumb off the sensor and allow the display to

reset. Press down again on the sensor as

described above. Make sure that your thumb is

positioned as shown, and that you are applying

the proper amount of pressure to the sensor. Try

the sensor several times until you become familiar

with it. Remember to stand still while measuring

your pulse.

When you are finished, stop the walking belt

and remove the key.

Slide the speed control to the “RESET” position,

and remove the key from the console. Keep the

key in a secure location.

Press the on/off button.

To turn off the dis-

plays, press the

on/off button. Note:

If the walking belt is

stopped and the

console buttons are

not pressed for 3 to

6 minutes, the dis-

plays will turn off

automatically.

Pulse Sensor

Mode Indicators

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Lyne 3500 Treadmill null

Weslo

Weslo Cadence 85 Bedienungsanleitung

Weslo

Weslo Cadence 450v Treadmill Kurzanleitung

Weslo

Weslo Cadence J2.8 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 200 Bedienungsanleitung

Weslo

Weslo Cadence E-30 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 200 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence 55 Bedienungsanleitung

Weslo

Weslo Cadence 21.5 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence 840 Bedienungsanleitung

Weslo

Weslo CADENCE 340 CS Bedienungsanleitung

Weslo

Weslo WLTL35520 Bedienungsanleitung

Weslo

Weslo WLTL21191 Bedienungsanleitung

Weslo

Weslo Compact XS WETL20708.0 Bedienungsanleitung

Weslo

Weslo Aerobicstride 2.0 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 50 Ls Bedienungsanleitung

Weslo

Weslo Cadence 920 Bedienungsanleitung

Weslo

Weslo 831.293020 Bedienungsanleitung

Weslo

Weslo Cadence 2300 Bedienungsanleitung

Weslo

Weslo CADENCE G 3.9 Bedienungsanleitung

Weslo

Weslo WLTL21280 Bedienungsanleitung

Weslo

Weslo WATL49710.0 Bedienungsanleitung

Weslo

Weslo Cadence 900 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo WLTL41580 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung