Weslo Cadence 840 Treadmill Bedienungsanleitung

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

USER'S MANUAL

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if there are

missing parts, please call:

1-888-936-4266

Mon.–Fri. 8h00 until 18h30 EST

(excluding holidays).

Model No. WCTL84091

Serial No.

Serial

Number

Decal

www.weslo.com

Visit our website at

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

TROUBLESHOOTING AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

CUSTOMER RECORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

WESLO is a registered trademark of ICON Health & Fitness, Inc.

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described in this

manual.

3. Place the treadmill on a level surface, with at

least 2.5 m (8 ft.) of clearance behind it and

0.5 m (2 ft.) on each side. Do not place the

treadmill on any surface that blocks air

openings. To protect the floor or carpet from

damage, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

6. The roller guards should be 32mm (1/8 in.)

from the rear roller. Adjust the position of

the roller guards, if necessary. (The drawing

on page 5 shows the location of the roller

guards.)

7. Keep children under 12 and pets away from

the treadmill at all times.

8. The treadmill should not be used by persons

weighing more than 115 kg (250 lbs.). Never

allow more than one person on the treadmill

at a time.

9. When connecting the power cord (see page

7), plug the power cord into a surge suppres-

sor (not included) and plug the surge sup-

pressor into a grounded circuit capable of

carrying 15 or more amps. No other appliance

should be on the same circuit. Do not use an

extension cord.

10. Use only a CUL-listed surge suppressor of

450 joules minimum surge dissipation with

voltage rating of 400 volts or less, rated at

15 amps, with a 1 mm2(14-gauge) cord of 1.5

m (5 ft.) or less in length. Do not use an

extension cord.

11. Failure to use a properly functioning surge

suppressor could result in damage to the

control system of the treadmill. If the control

system is damaged, the walking belt may

change speed or stop unexpectedly, which

may result in a fall and serious injury.

12. Keep the power cord and the surge suppres-

sor away from heated surfaces.

13. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See

BEFORE YOU BEGIN on page 5 if the tread-

mill is not working properly.)

14. Wear appropriate exercise attire when using

the treadmill. Do not wear loose clothing

that could become caught in the treadmill.

Athletic support clothes are recommended

for both men and women. Always wear ath-

letic shoes. Never use the treadmill with

bare feet, wearing only stockings, or in san-

dals.

15. Never start the treadmill while you are

standing on the walking belt. Always hold

the handrails while exercising on the tread-

mill.

16. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

17. Adjust the speed in small increments.

18. Never leave the treadmill unattended while it

is running. Always remove the key when the

treadmill is not in use.

19. To change the incline level of the treadmill,

refer to the instructions on page 10. Do not

use the treadmill with the incline pins

removed.

WARNING: To reduce the risk of burns, fire, electric shock or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

The decal shown at the right has been

placed on the water bottle holder of the

treadmill.

If the decal is missing, or if it is not legi-

ble, please call our Customer Service

Department, toll-free, to order a free

replacement decal (see ORDERING

REPLACEMENT PARTS on page 19).

Apply the decal in the location shown.

20. Inspect and properly tighten all parts of the

treadmill every three months.

21. Never drop or insert any object into any

opening.

22. Always unplug the power cord before per-

forming the maintenance and adjustment

procedures described in this manual. Never

remove the motor hood unless instructed to

do so by an authorized service representa-

tive. Servicing other than the procedures in

this manual should be performed by an

authorized service representative only.

23. This treadmill is intended for in-home use

only. Do not use this treadmill in any com-

mercial, rental, or institutional setting.

SAVE THESE INSTRUCTIONS

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

BEFORE YOU BEGIN

Handrails

Accessory Tray

Key/Clip

Motor Hood

Upright

Pulse Sensor

Water Bottle Holder

(Bottle is not included)

Towel Rack

Circuit Breaker

Walking Belt

Roller Guards

Foot Rails

Power Cord

Incline Pin

Rear Roller

Adjustment Bolts Note: The rear leg pad may mark some types of linoleum.

Mild household cleaning agents will remove any marks.

FRONT

BACK

RIGHT SIDE

Rear Leg Pads

Thank you for selecting the WESLO®CADENCE 840

treadmill. The CADENCE 840 treadmill blends

advanced technology with innovative design to offer

you an excellent form of cardiovascular exercise, in the

convenience and privacy of your home.

For your benefit, read this manual carefully before

using the treadmill. If you have additional questions,

please call our Customer Service Department toll-free

at 1-888-936-4266, Monday through Friday, 8h00 until

18h00 Eastern Time (excluding holidays). To help us

assist you, please note the product model number and

serial number before calling. The model number of the

treadmill is WCTL84091. The serial number can be

found on a decal attached to the treadmill (see the

front cover of this manual for the location).

Before reading further, please review the drawing

below and familiarize yourself with the parts that are

labeled.

Console

Flange Nut (54)–2

3/8" x 1 1/2" Washer

(27)–1

5/16" x 3" Bolt (71)–2

3/8" x 1" Bolt (7)–3

3/8" x 1 1/2" Washer

(27)–1

1. Raise the Upright (20) to the vertical position. Slide the

3/8” x 1 1/2” Washer (27) onto a 3/8” x 1” Bolt (7). Insert

the Bolt into the lower end of the Upright. Finger tighten

the Bolt into the Frame (46).

2. If there are plastic ties in the upper ends of the Handrails

(1), cut them off. Insert the upper end of one of the

Handrails into the Console Housing (4). (Note: The two

Handrails are identical. Due to the manufacturing

process, there is a dimple near the lower end of each

Handrail. It makes no difference which side the dimple is

on when the Handrails are assembled.) Finger tighten a

3/8” x 1” Bolt (7) into the plate under the Console Housing

(4) and into the Handrail.

Attach the other Handrail (1) in the same manner.

3. Insert a 5/16” x 3” Bolt (71) into the lower end of the right

Handrail (1) and the Frame (46). Reach under the Frame

and tighten a Flange Nut (54) onto the Bolt.

Attach the other Handrail (not shown) in the same man-

ner. Tighten all Bolts used in steps 1 through 3.

ASSEMBLY

Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until

assembly is completed. Refer to the drawings below to identify the small parts used in assembly.

Assembly requires a standard screwdriver and an adjustable wrench (not

included).

4. Remove the paper backing from the Adhesive Clip (16).

Press the Adhesive Clip onto the Right Endcap (45) in the

indicated location. Press the Allen Wrench (41) into the

Adhesive Clip.

5. The Console (5) requires three "AA" batteries (not

included); alkaline batteries are recommended.

Slide up the Battery Cover (36). Press three batteries into

the battery compartment, with the negative (–) ends of the

batteries touching the springs. Close the Battery Cover.

Batteries

6. Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet from dam-

age, place a mat beneath the treadmill.

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBETM WALKING BELT

Your treadmill features a walking belt coated with

PERFORMANT LUBETM, a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other

substances to the walking belt or the walking plat-

form. Such substances will deteriorate the walking

belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like any other type of sophisticated

electronic equipment, can be seriously damaged by

sudden voltage changes in your home’s power.

Voltage surges, spikes, and noise interference can

result from weather conditions or from other appliances

being turned on or off. To decrease the possibility of

your treadmill being damaged, always use a surge

suppressor with your treadmill (see drawing 1 at

the right).

Use only a single-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have a

UL suppressed voltage rating of 400 volts or less

and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated

for 120 volts AC and 15 amps. There must be a

monitoring light on the surge suppressor to indi-

cate whether it is functioning properly. Failure to

use a properly functioning surge suppressor could

result in damage to the control system of the

treadmill. If the control system is damaged, the

walking belt may change speed or stop unexpect-

edly, which may result in a fall and serious injury.

This product must be grounded. If it should malfunc-

tion or break down, grounding provides a path of least

resistance for electric current to reduce the risk of elec-

tric shock. This product is equipped with a cord having

an equipment-grounding conductor and a grounding

plug. Plug the power cord into a surge suppressor,

and plug the surge suppressor into an appropriate

outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Important: The treadmill is not compatible with

GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus-

trated in drawing 1 below. A temporary adapter that

looks like the adapter illustrated in drawing 2 may be

used to connect the surge suppressor to a 2-pole

receptacle as shown in drawing 2 if a properly

grounded outlet is not available.

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed

by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet box

covers are not grounded. Contact a qualified elec-

trician to determine if the outlet box cover is

grounded before using an adapter.

DANGER: Improper connection

of the equipment-grounding conductor can

result in an increased risk of electric shock.

Check with a qualified electrician or service-

man if you are in doubt as to whether the

product is properly grounded. Do not modify

the plug provided with the product—if it will

not fit the outlet, have a proper outlet

installed by a qualified electrician.

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

STEP BY STEP CONSOLE OPERATION

Before operating the console, make sure that the

power cord is properly plugged in.

Next, step onto the foot rails of the treadmill. Find the

clip attached to the key (see the drawing above), and

slide the clip onto the waistband of your clothing.

Follow the steps at the right and on page 10 to operate

the console.

Insert the key fully into the power switch.

Note: The displays will not be activated when the

key is first inserted, unless batteries were just

installed.

Press the on/reset button.

The two displays will

be activated. Note: If

batteries were just

installed, the dis-

plays will already be

activated.

Reset the speed control and start the walking

belt.

Slide the speed

control fully to

the left, to the

RESET posi-

tion. Next, slide

the control to

the right until

the walking belt begins to move at slow speed.

Carefully step onto the walking belt and begin

walking. Change the speed of the walking belt as

desired by sliding the speed control.

To stop the walking belt, slide the speed control to

the RESET position.

CAUTION: Before operating the

console, read the following important precau-

tions.

• Do not stand on the walking belt when turn-

ing on the power.

• Always wear the clip while operating the

treadmill. When the key is removed from the

console, the power will shut off.

• After the speed control knob is moved, there

will be a pause before the walking belt begins

to move. Adjust the speed in small incre-

ments until you are familiar with the treadmill.

• To reduce the risk of electric shock, keep

the console dry, avoid spilling liquids on the

console, and use only a sealed water bottle.

DIAGRAM OF THE CONSOLE

Key

Speed Control

Pulse Sensor

Display Display

Clip

Note: If there is a thin sheet of clear plastic

on the face of the console, remove it.

On/Reset

Button

Monitor your progress with the two displays.

Time/Distance dis-

play—The left display

shows the elapsed

time and the distance

that you have walked

or run. Every few sec-

onds, the display will

change from one number to the other.

Cals/Fat Cals/

Speed/Pulse

display—The right

display shows the

approximate numbers

of calories and fat

calories you have

burned (see FAT

BURNING on page

14) and the speed of the walking belt. Every few

seconds, the display will change from one number

to the next. The left mode bar will appear when

the number of calories is shown; the right mode

bar will appear when the number of fat calories is

shown. This display will also show your heart rate

when the pulse sensor is used.

To reset the displays, press the on/reset button.

Note: The displays can show distance and speed

in kilometers or miles. To change from one mea-

surement to the other, press and hold the on/reset

button for approximately two seconds, until the

entire display is temporarily lit.

Measure your pulse, if desired.

To use the pulse

sensor, stand on

the foot rails and

place your thumb

on the pulse sen-

sor as shown. The

pulse sensor is

pressure-activat-

ed—Fully press it

down. Do not

press too hard,

or the circulation

in your thumb

will be restricted,

and your pulse will not be detected. Next, slight-

ly raise your thumb until the heart-shaped indicator

in the pulse display flashes steadily. Hold your

thumb at this level. After 5 to 10 seconds, your

heart rate will be displayed.

If an “H” (high) or an “L” (low) is displayed after 10

seconds, or if your heart rate is not displayed, lift

your thumb off the sensor and allow the display to

reset. Press down again on the sensor as

described above. Make sure that your thumb is

positioned as shown, and that you are applying

the proper amount of pressure to the sensor. Try

the sensor several times until you become familiar

with it. Remember to stand still while measuring

your pulse.

When you are finished exercising, stop the

walking belt and remove the key.

Step onto the foot rails, slide the speed control to

the Reset position, and remove the key from the

console. The displays will turn off a few minutes

after the key is removed. Note: Any time that the

walking belt is stopped for a few minutes, the

displays will automatically turn off to conserve

the batteries.

HOW TO CHANGE THE INCLINE

To vary the inten-

sity of your exer-

cise, the incline

of the treadmill

can be changed.

There are three

different incline

settings. Before

changing the

incline, remove the key and unplug the power cord.

To change the

incline, carefully

lay the treadmill

on its left side.

Remove the

incline pin from

the right incline

leg as shown in

drawing 1. Adjust the incline leg to the desired height

and fully re-insert the incline pin. Make sure the incline

pin is in the “locked” position shown in drawing 2. Lay

the treadmill on its right side. Repeat the procedure for

the left incline leg. CAUTION: Before using the

treadmill, make sure that both incline pins are fully

inserted at the same height. Do not use the tread-

mill with the incline pins removed.

Pulse Sensor

Mode Bar

Incline Pin

Frame

Incline Leg

Incline Pin

Andere Handbücher für Cadence 840 Treadmill

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence 30.8 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 835 British Bedienungsanleitung

Weslo

Weslo Cadence 720 Bedienungsanleitung

Weslo

Weslo Cadence 890 Bedienungsanleitung

Weslo

Weslo Cadence 2000 Bedienungsanleitung

Weslo

Weslo CADENCE 880 Bedienungsanleitung

Weslo

Weslo WLTL37309.0 Bedienungsanleitung

Weslo

Weslo WLTL223040 Bedienungsanleitung

Weslo

Weslo Cadence 500 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence C32 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 5.2 W/elec Treadmill Bedienungsanleitung

Weslo

Weslo Cadence J2.8 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence J3.8 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 10.0 P.i. Bedienungsanleitung

Weslo

Weslo Cadence 200 Treadmill Bedienungsanleitung

Weslo

Weslo WLTL29011 Bedienungsanleitung

Weslo

Weslo Cadence 90 Treadmill Bedienungsanleitung

Weslo

Weslo Weider 8.0 Bedienungsanleitung

Weslo

Weslo Crosswalk 5.0t Treadmill Benutzerhandbuch

Weslo

Weslo WETL34709.0 Bedienungsanleitung

Weslo

Weslo Cadence 1000 Fm Bedienungsanleitung

Weslo

Weslo Cadence 400 Treadmill Benutzerhandbuch

Weslo

Weslo Crosswalk 5.2t Treadmill Benutzerhandbuch

Weslo

Weslo Cadence 720 Kurzanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung