Whalen Asherton File SPUS-ASHF Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2018-05-29 Rev. 0001-A Factory: HECFUR

Asherton File

Model # SPUS-ASHF

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP

POINTS, SHARP EDGES AS RECEIVED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASE

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Asherton File

MODEL #: SPUS-ASHF

MADE IN CHINA

SPECIAL NOTE

Please read the instruction sheets completely before assembly. Examine all packaging

material before discarding carton. Remove any remaining staples from the carton before

discarding. Remove all parts from carton and separate into groups as indicated on part

list. Please ensure all parts are included prior to assembly. Use of power tools to

complete assembly is not recommended.

M A X I M U M R E C O M M E N D E D W E I G H T L O A D S

MAXIMUM LOAD 30 lb. (13.7 kg)

THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM

WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS

INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.

MAXIMUM LOAD 50 lb. (22.7 kg)

MAXIMUM LOAD 10 lb. (4.5 kg)

IMPORTANT

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED

OFF WITH DAMP CLOTH.

Insert the Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam

Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam

Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

You are now ready to assemble the KD unit.

1 2 3

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- File Top (Qty. 1) B- Left Side Panel (Qty. 1) C- Right Side Panel (Qty. 1)

D- Back Panel (Qty. 1) E- Front Stretcher (Qty. 1) F- Bottom Panel (Qty. 1)

G- Utility Drawer Front (Qty. 1) H- Utility Drawer Back Panel (Qty. 1) I- Utility Drawer Left Side (Qty. 1)

J- Utility Drawer Right Side (Qty. 1) K- Utility Drawer Bottom Panel (Qty. 1) L- File Drawer Front (Qty. 1)

M- File Drawer Back Panel (Qty. 1) N- File Drawer Left Side (Qty. 1) O- File Drawer Right Side (Qty. 1)

P- File Drawer Bottom Panel (Qty. 1) Q- Base (Qty. 2) R- Guide Rail (Qty. 2)

S- File Hanger (Qty. 2) T- 12" Ball Bearing Slides (Qty. 2) CL- Left Slide Track (Qty. 1)

CR- Right Slide Track (Qty. 1) DL- Left Slide Runner (Qty. 1) DR- Right Slide Runner (Qty. 1)

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

(1) Small Cam Lock (2) Large Cam Lock (3) Cam Bolt

(Qty. 8+1 extra) (Qty. 12+1 extra) (Qty. 20+1 extra)

(4) M8 x 30 mm Wood Dowel (5) M3 x 12 mm Screw (6) M4 x 32 mm Screw

(Qty. 16+1 extra) (Qty. 24+1 extra) (Qty. 8+1 extra)

(7) M4 x 50 mm Screw (8) 1/4" x 15 mm Bolt (9) Lock Washer

(Qty. 6+1 extra) (Qty. 4+1 extra) (Qty. 4+1 extra)

(10) Flat Washer (11) Knob (12) Knob Bolt

(Qty. 4+1 extra) (Qty. 2) (Qty. 2)

Hex Wrench (Qty. 1) Glue (Qty. 1) Tipping Restraint Hardware Kit (Qty. 1)

(Included in plastic bag)

Tools required: Hex wrench (provided) and Phillips screwdriver and hammer (not provided).

Upper Drawer Assembling

1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw four Cam Bolts (3) into the designated small holes on the Utility Drawer Front (G).

3. Attach the Utility Drawer Side Panels (I and J) to the Utility Drawer Front (G) by engaging four Small

Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement).

4. Slide the Utility Drawer Bottom Panel (K) into the grooves between the Drawer Side Panels (I and J)

and fully inserted into the Drawer Front (G).

Upper Drawer Assembling

5. Fasten the Utility Drawer Back Panel (H) to the Drawer Side Panels (I and J) with four 32 mm Screws

(6). Make sure that the Drawer Bottom Panel (K) fits securely into the groove of the Drawer Back Panel

(H).

6. Using the pilot holes as a guide, align and attach the Left Slide Runner (DL) to the Drawer Left Side (I)

using three 12 mm Screws (5). Make sure the roller end of Slide Runner faces backward. Tightly fasten

with a Phillips screwdriver.

7. Repeat the same process to attach the Right Slide Runner (DR) to the Drawer Right Side (J).

Drawer Assembling

8. Turn the assembled drawer upright. Attach one Knob (11) to the outside of the Drawer Front (G) with

the Knob Bolt (12).

9. Pick up the Ball Bearing Slides (T) and separate the Slide Runners for the following step. Extend the

Slide Runner all the way forward. Press the plastic release lever of the ball bearing slides up and pull

the Slide Runner complete out.

10. Using the pilot holes as a guide, attach the separated Slide Runners (T) to the File Drawer Left and

Right Sides (N and O) respectively with three 1/2” Screws (5) per slide runner.

File Drawer Assembling

11. Securely screw four Cam Bolts (3) into the designated small holes on the File Drawer Front (L).

12. Attach the File Drawer Left and Right Side Panels (N and O) to the File Drawer Front (L) with four

Small Cam Locks (1).

13. Slide the File Drawer Bottom Panel (P) into the grooves between the Drawer Side Panels (N and O) and

fully inserted into the File Drawer Front (L). Be sure the finished surface will face up.

File Drawer Assembling

14. Fasten the File Drawer Back Panel (M) to the Drawer Side Panels (N and O) with four 32 mm Screws

(6). Make sure that Drawer Bottom Panel (P) fits securely into the groove of the Drawer Back Panel

(M).

15. Turn the assembled drawer upright. Position Guide Rails (R) onto the Drawer Side Panels (N and O)

with the high side facing inward.

16. Hook two File Hangers (S) onto the high edge of Guide Rails (R). Slide the File Hangers forward and

backward to keep hanging files organized.

17. Attach one Knob (11) to the outside of the Drawer Front (L) with the Knob Bolt (12).

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen WSWB722436W-US Bedienungsanleitung

Whalen

Whalen Triton Wood Veneer Bookcase Bedienungsanleitung

Whalen

Whalen BSKY-368036 Bedienungsanleitung

Whalen

Whalen WSCSC6172WB Bedienungsanleitung

Whalen

Whalen PROL-37 Bedienungsanleitung

Whalen

Whalen TEN2PST Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CUS78BK-1 Bedienungsanleitung

Whalen

Whalen WSF60RV26DO Bedienungsanleitung

Whalen

Whalen Kendal Desk Bedienungsanleitung

Whalen

Whalen WF60BVJ Bedienungsanleitung

Whalen

Whalen PAL70ECON Bedienungsanleitung

Whalen

Whalen SMXL-6 Bedienungsanleitung

Whalen

Whalen AVT-22E Bedienungsanleitung

Whalen

Whalen WSF54BF23-3 Bedienungsanleitung

Whalen

Whalen BJAVCL65-3 Bedienungsanleitung

Whalen

Whalen Bayside CSC72TC-10 Bedienungsanleitung

Whalen

Whalen BJKC Bedienungsanleitung

Whalen

Whalen WMCPRO-9 Bedienungsanleitung

Whalen

Whalen SPLS-TU48CD Bedienungsanleitung

Whalen

Whalen Industrial Audio Tower Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC72LBK-6 Bedienungsanleitung

Whalen

Whalen LWS30DCVAG Bedienungsanleitung

Whalen

Whalen Bayside CSCGLBST-4-UK-BL Bedienungsanleitung

Whalen

Whalen Devon File EC-DEDF Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung