Whalen WSF60RV26DO Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2020-05-27 Rev. 0001-C

Ridgeview 60in Fireplace Console

Model # WSF60RV26DO

# WSF60RV26WA

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASED: / /

IMPORTANT

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and

non-abrasive surface. You will need the parts identified on page 3 and 4 of this instruction manuals.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH THE DOWELS. EXCESS GLUE CAN BE

WIPED OFF WITH A DAMP CLOTH.

Insert dowel at least half way by tapping lightly with a rubber mallet (not included), IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the pre-drilled small holes on the panel. Connect both panels together; making

sure the Cam Bolt goes into the pre-drilled hole at the end of the panel with the Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole in the panel. Make sure the arrow on the Cam Lock is

pointed towards the Cam Bolt.

3. Once the Cam Bolt is connected inside the Cam Lock, take a Phillips screwdriver (not included) and

tighten the Cam Lock clockwise.

4. Plug the Cam Lock Cover into the cross slot of the Cam Locks to conceal the cam.

You are now ready to assemble the KD unit.

How to adjust the European adjustable hinges on doors

Shipping may cause doors to go out of alignment. If you find that the doors need to be adjusted

slightly, turn the appropriate screw, as illustrated.

1. TO ADJUST DOOR FORWARD OR BACKWARD.

2. TO ADJUST DOOR TO RIGHT OR TO LEFT.

3. TO ADJUST DOOR UP OR DOWN.

GLUE

XXFINAL

1 2 43

1234

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (Qty. 1) B- Fixed Shelf (Qty. 1) C- Base (Qty. 1)

D- Side Panel with Molding (Qty. 2) E- Left Partition Panel (Qty. 1) F- Right Partition Panel (Qty. 1)

G- Upper Crossbar (Qty. 1) H- Middle Crossbar (Qty. 1) I- Middle Left Stile (Qty. 1)

J- Middle Right Stile (Qty. 1) K- Firebox Support (Qty. 1) L- Left Adjustable Shelf (Qty. 2)

M- Right Adjustable Shelf (Qty. 2) N- Door (Qty. 2) O- Left Back Panel (Qty. 1)

P- Middle Back Panel (Qty. 1) Q- Right Back Panel (Qty. 1) R- Glass Door Insert (Qty. 2)

Fireplace Insert (Qty. 1) Remote Control with Battery (Qty. 1) (1) Cam Lock (Qty. 22+1 extra)

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

(2) Cam Bolt (3) M8 x 30 mm Wood Dowel (4) M3.5x12mmScrew

(Qty. 22+1 extra) (Qty. 24+1 extra) (Qty. 24+1 extra)

(5) M3.5x15mmWasherHeadScrew (6) M4x30mmScrew (7) M3.5x15mmPanHeadScrew

(Qty. 38+1 extra) Qty. 8+1 extra) (Qty. 8+1 extra)

(8) M4 x 50 mm Screw (9) Mending Plate (10) Stopper

(Qty. 4+1 extra) (Qty. 2) (Qty. 2)

(11) L-shaped Metal Bracket (12) Handle (13) 5/32’’ x 22 mm Bolt

(Qty. 2) (Qty. 2) (Qty. 4+1 extra)

(14) Shelf Support (15) Acrylic Stopper (16) Cam Cover

(Qty. 16+1 extra) (Qty. 1) (Qty. 18+1 extra)

Glue Touch-up Pen Tipping RestraintHardware Kit (Qty. 2)

(Qty. 1) (Qty. 1) (Included in plastic bag)

Tools required (not included): Phillips screwdriver, stud finder, pencil, tape measure, power drill and 1/8 in

drill bit.

Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A), Base (C),

Partition Panels (E and F) and Middle Crossbar (H) with a Phillips screwdriver.

NOTE: Screw-in cam bolts must be screwed down flush.

3. Insert fourteen Wood Dowels (3) into the inner holes on the Fixed Shelf (B) and Partition Panels (E and

F). Make sure that you use a small amount of glue with both ends of all dowels.

NOTE: It is very important to use a small amount of glue on both ends of dowels.

Assembly Instructions

4. Align and attach the Middle Crossbar (H) to the Fixed Shelf (B) by engaging three Cam Locks (1)

(Refer to page 2 on Cam Lock system operation supplement).

5. Align and attach the Middle Left Stile (I) to the Left Partition Panel (E) and fasten them into place with

four 30 mm Screws (6).

6. Repeat the same procedure to attach the Middle Right Stile (J) to the Right Partition Panel (F).

Assembly Instructions

7. Align and attach the Stoppers (10) to the Partition Panels (E and F) with four 12 mm Screws (4).

8. Attach the Fixed Shelf (B) beween the Partition Panels (E and F) by engaging four Cam Locks (1).

E/F

Assembly Instructions

9. Using the wood dowels as a guide, firmly press the assembled Partition Panels (E and F) to the Base (C)

and fasten them in place with four 50 mm Screws (8). Fully tighten the screws with a Phillips

screwdriver.

10. Glue the Wood Dowels (3) into the inner holes of Side Panel with Moldings (D) and Upper Crossbar (G)

as shown.

NOTE: Do Not insert the wood dowels into the cam bolts holes.

Assembly Instructions

11. Align the large holes on one Side Panel with Molding (D) with the inserted Wood Dowels (3) on the

Base (C). Firmly press them together and fasten it in place by engaging two Cam Locks (1).

12. Repeat the same procedure to attach the other Side Panel with Molding (D) at the other end.

13. Align and attach the Upper Crossbar (G) to the Top Panel (A) with three Cam Locks (1).

Assembly Instructions

14. Place the Top Panel (A) onto the inserted Wood Dowel (3) properly and fasten it in place by engaging

eight Cam Locks (1).

15. Ask for assistance to flip the unit around at its front edge as shown.

16. With the pilot holes as a guide, fasten the Middle Crossbar (H) to the Middle Left and Right Stiles (I

and J) by attaching two Mending Plates (9) at the joints, using two 12 mm Screws (4) per plate.

AD/E/F

HI/J

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen Bayside CSC7PD-7B-UK Bedienungsanleitung

Whalen

Whalen SIG3IN1CGT Bedienungsanleitung

Whalen

Whalen WMCPRO-6 Bedienungsanleitung

Whalen

Whalen HOCSFC-13AX Bedienungsanleitung

Whalen

Whalen Westport SMUBCH Betriebsanleitung

Whalen

Whalen AVT-22E Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CUS78BK-1 Bedienungsanleitung

Whalen

Whalen PROL-37 Bedienungsanleitung

Whalen

Whalen CAMELOT Bedienungsanleitung

Whalen

Whalen LWS30DCVAG Bedienungsanleitung

Whalen

Whalen Bayside CSC9PD-9-T Bedienungsanleitung

Whalen

Whalen SPLS-TU48CD Bedienungsanleitung

Whalen

Whalen Greenwich Computer Desk with Hutch Bedienungsanleitung

Whalen

Whalen ODUS-JLDHCV Bedienungsanleitung

Whalen

Whalen Mainstays MS18-03-1011-02 Bedienungsanleitung

Whalen

Whalen LEVELUP GS-BF16R-B Bedienungsanleitung

Whalen

Whalen O'nin Espresso Room Divider Bedienungsanleitung

Whalen

Whalen BBAT27TC Bedienungsanleitung

Whalen

Whalen BBAVC48-SMB Bedienungsanleitung

Whalen

Whalen LEVELUP SPLS-LTCGD Bedienungsanleitung

Whalen

Whalen Bayside Furnishings Braeden CSC7PD-7 Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC72LBK-6 Bedienungsanleitung

Whalen

Whalen BBAVCWL60-BC Bedienungsanleitung

Whalen

Whalen Toledo Bookcase ECOM-TO30BK Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung