Whalen Crestwood MNFP68CW30MB Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2021-04-30 Rev. 0001-A

Crestwood 68in. Fireplace Console

Model # MNFP68CW30MB

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

TE PURCHASE

1. Please read the Assembly Instructions prior to assembling this product.

2. Remove all hardware from the box and sort by size.

3. Check to see that all hardware and parts are present BEFORE assembling.

4. Ask a friend to assist you with the assembly of this furniture.

5. To avoid damage, assemble the product on a sturdy, level and protective surface.

6. Please wait until all steps are completed before fully tightening bolts.

7. Make sure all screws and bolts are tightly fastened before the unit is used.

How to adjust the European adjustable hinges on doors

Shipping may cause doors to go out of alignment. If you find that the doors need to be adjusted slightly,

turn the appropriate screw as illustrated.

1. TO ADJUST DOOR FORWARD OR BACKWARD.

2. TO ADJUST DOOR TO RIGHT OR TO LEFT.

3. TO ADJUST DOOR UP OR DOWN.

SPECIAL NOTE

Please read the instruction sheets completely before assembly. Examine all packaging material

before discarding carton. Remove any remaining staples from the carton before discarding.

Remove all parts from carton and separate into groups as indicated on part list. Please ensure

all parts are included prior to assembly. Use of power tools to complete assembly is not

recommended.

This product is sold with two sets of Tipping Restraint Hardware Kit. You must

install the Tipping Restraint

Hardware between the wall and the console to prevent any accidents or damages. W

hen properly installed,

this restraint can provide protection against the unexpected tipping of the unit due to small tremors, bumps o

climbing. The restraint is only a deterrent and is not a substitute for proper adult supervision. Use of tip-over

restraints may only reduce, but not eliminate, the risk of tip-over.

G E N E R A L I N F O R M A T I O N , T I P S A N D T R I C K S

IMPORTANT

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manuals.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH THE DOWELS. EXCESS GLUE CAN BE

WIPED OFF WITH A DAMP CLOTH.

Insert Dowel at least halfway by tapping lightly with a rubber mallet (not included), IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the pre-drilled small holes on the panel. Connect both panels together; making sure

the Cam Bolt goes into the pre-drilled hole at the end of the panel with the Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole in the panel. Make sure the arrow on the Cam Lock is

pointed towards the Cam Bolt.

3. Once the Cam Bolt is connected inside the Cam Lock, take a Phillips screwdriver (not included) and

tighten the Cam Lock clockwise.

4. Plug the Cam Lock Cover into the cross slot of the Cam Locks to conceal the cam.

You are now ready to assemble the KD unit.

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (Qty. 1) B- Media Shelf (Qty. 1) C- Bottom Panel (Qty. 1)

D- Left Side Panel (Qty. 1) E- Right Side Panel (Qty. 1) F- Left Partition Panel (Qty. 1)

G- Right Partition Panel (Qty. 1) H- Left Stile (Qty. 1) I- Right Stile (Qty. 1)

J- Upper Stile Molding (Qty. 2) K- Middle Crossbar (Qty. 1) L- Long Firebox Support (Qty. 1)

M- Short Firebox Support (Qty. 2) N- Skirting Bottom Support (Qty. 1) O- Left Skirting (Qty. 1) P- Right Skirting (Qty. 1)

Q- Back Skirting (Qty. 1) R- Front Skirting (Qty. 1) S- Adjustable Shelf (Qty. 4)

T- Door (Qty. 2) U- Wood Door Panel (Qty. 2) V- Side Back Panel (Qty. 2)

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are

present before beginning assembly.

W- Middle Back Panel (Qty. 1) Fireplace Insert (Qty. 1) Remote Control with Battery (Qty. 1)

(1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel (4) M3.5 x 12 mm Flat Head Screw

(Qty. 50+2 extra) (Qty. 50+2 extra) (Qty. 51+2 extra) (Qty. 4+1 extra)

(5) M3.5 x 12 mm Pan Head Screw (6) M3.5 x 15 mm Washer Head Screw (7) M4 x 25 mm Screw

(Qty. 4+1 extra) (Qty. 36+1 extra) (Qty. 6+1 extra)

(8) M4 x 38 mm Screw (9) M4 x 50 mm Screw (10) Door Stopper (11) Floor Leveler

(Qty. 2) (Qty. 8+1 extra) (Qty. 2) (Qty. 2)

(12) Mending Plate (Qty. 2) (13) Handle (Qty. 2) (14) 5/32 x 22 mm Handle Bolt (Qty. 4) (15) Shelf Support (Qty. 2)

(16) Cam Lock Cover (Qty. 14+1 extra) (17) Acrylic Stopper (Qty. 1) (18) Metal Bracket (Qty. 2)

(19) M3 x 15 mm Screw (Qty. 4+1 extra) Glue (Qty. 2) Touch-up Pen (Qty. 1) Tipping Restraint Hardware Kit (Qty. 2)

(Included in plastic bag)

Tools required (not provided): Phillips screwdriver, stud finder, power drill and 3 mm/0.1 in drill bit.

Assembly Instructions

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back

and fully tighten all bolts. This will make it easier during assembly of unit.

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Using the pilot holes as a guide, attach one Door Stopper (10) to each Partition Panel (F and G) with

two 15 mm Screws (19) per panel.

3. Securely screw the Cam Bolts (2) into the designated small holes on the Partition Panels (F and G),

Stiles (H and I) and Middle Crossbar (K) using a Phillips screwdriver. DO NOT overtighten the Cam

Bolts.

Assembly Instructions

4. Insert Wood Dowels (3) into the inner holes on the Media Shelf (B), Partition Panels (F and G) and

Upper Stile Moldings (J). Tap in with a rubber mallet, if necessary. Make sure that you use a small

amount of glue with both ends of all dowels.

5. Align and attach the Left Stile (H) to the Left Partition Panel (F) by engaging four Cam Locks (1)

(Refer to page 3 on Cam Lock system operation supplement).

6. Repeat the same procedure to attach the Right Stile (I) to the Right Partition Panel (G).

Assembly Instructions

7. Align and attach the Middle Crossbar (K) to the Media Shelf (B) by engaging three Cam Locks (1).

8. Attach the assembled Media Shelf (B) between the Partition Panels (F and G) by engaging four Cam

Locks (1).

Assembly Instructions

9. Stand the previous assembly unit upright.

10. Fasten the Upper Stile Moldings (J) to the Left and Right Stiles (H and I) with four 25mm Screws (7).

11. Lay down the assembled unit.

12. Glue and insert eight Wood Dowels (3) into the inner holes of the Partition Panels (F and G) at both

ends.

Assembly Instructions

13. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A) and Bottom

Panel (C) using a Phillips screwdriver.

14. Securely screw the Cam Bolts (2) into the designated small holes on Left and Right Skirtings (O and P)

and Front Skirting (R) using a Phillips screwdriver.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen XLDEC54-NV Bedienungsanleitung

Whalen

Whalen James SPCA-JA48D Bedienungsanleitung

Whalen

Whalen WF48EVB Bedienungsanleitung

Whalen

Whalen The Pioneer Woman PWS336158813017 Bedienungsanleitung

Whalen

Whalen Barkston Lane SPUS-BLDH Bedienungsanleitung

Whalen

Whalen CAMELOT Bedienungsanleitung

Whalen

Whalen BBAVT27-MBC Bedienungsanleitung

Whalen

Whalen Bayside CUS4PCHD-1PC Bedienungsanleitung

Whalen

Whalen Luke Twin over Twin Loft Bunk Bed with Desk Bedienungsanleitung

Whalen

Whalen BSKY-368036 Bedienungsanleitung

Whalen

Whalen BJXL-2 Bedienungsanleitung

Whalen

Whalen O'nin Espresso Room Divider Bedienungsanleitung

Whalen

Whalen Kellum WMFP54EC-26GR Bedienungsanleitung

Whalen

Whalen BBXL54NV Bedienungsanleitung

Whalen

Whalen WF36FVB Bedienungsanleitung

Whalen

Whalen Better Homes and Gardens Ellis Shutter Bedienungsanleitung

Whalen

Whalen BBAVCD54N Bedienungsanleitung

Whalen

Whalen Bayside CUS60AC-1R Bedienungsanleitung

Whalen

Whalen 3-in-1 TV Stand Bedienungsanleitung

Whalen

Whalen WSUC-4C Bedienungsanleitung

Whalen

Whalen BBAVC48-SMB Bedienungsanleitung

Whalen

Whalen Cohen Series Bedienungsanleitung

Whalen

Whalen Bayside CSC7PD-12-UK Bedienungsanleitung

Whalen

Whalen ECOM-RPD Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung