Whalen Barkston Lane SPUS-BLDH Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2016-07-14 Rev. 0001-B Factory: RIDHUA

Barkston Lane Desk with Hutch

Model # SPUS-BLDH

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASED: / /

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Barkston Lane Desk with Hutch (SPUS-BLDH)

MADE IN CHINA

SPECIAL NOTE

Please read the instruction sheets completely before assembly. Examine all packaging

material before discarding carton. Remove any remaining staples from the carton before

discarding. Remove all parts from carton and separate into groups as indicated on part

list. Please ensure all parts are included prior to assembly. Use of power tools to

complete assembly is not recommended.

MAXIMUM RECOMMENDED WEIGHT LOA

THIS UNIT IS INTENDED FOR USE ONLY WITH THE MAXIMUM

WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM

WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.

MAXIMUM LOAD 30 lb. (13.6 kg)

MAXIMUM LOAD 200 lb. (90.7 kg)

MAXIMUM LOAD 10 lb. (4.5 kg)

MAXIMUM LOAD 30 lb. (13.6 kg)

MAXIMUM LOAD 50 lb. (22.6 kg)

IMPORTANT

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED

OFF WITH DAMP CLOTH.

Insert Dowel at least half way by tapping lightly with a rubber mallet IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw Cam Bolt into the pre-drilled small holes on panel. Connect both panels together; making

sure Cam Bolt goes into pre-drilled hole on the end of panel with Cam Lock.

2. Insert Cam Lock into pre-drilled large hole on panel. Make sure arrow on Cam Lock is pointed toward

Cam Bolt.

3. Once Cam Bolt is connected inside Cam Lock, take a Phillips screwdriver and tighten Cam Lock clockwise.

4. Plug Cam Cap into the cross slot of the Cam Locks to conceal the cam.

You are now ready to assemble the unit.

FINAL

1 2 43

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Left Outside Panel (Qty. 1) B- Right Outside Panel (Qty. 1) C- Upper Divider (Qty. 2)

D- Left Inner Panel (Qty. 1) E- Right Inner Panel (Qty. 1)

F- Hutch Fixed Shelf (Qty. 1) G- Hutch Bottom Panel (Qty. 2)

H- Hutch Back Panel (Qty. 1) I- Desk Top (Qty. 1)

J- Left Leg (Qty. 1) K- Right Leg (Qty. 1)

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

(1) Cam Lock (2) Cam Bolt (3) Wood Dowel

(Qty.

20+1 extra) (Qty. 20+1 extra) (Qty. 32+1 extra)

(4) Ø4 mm x 38 mm

Screw

(5) Cam Lock Cover (6) M6 x 35 mm Bolt

(Qty. 6+1 extra) (Qty. 20+1 extra) (Qty. 20+1 extra)

(7) Lock Washer (8) Flat Washer (9) Knob

(Qty. 20+1 extra) (Qty. 20+1 extra) (Qty. 4)

(10) 22 mm Knob Bolt (Qty. 4) (11) Rubber Pad (Qty. 4)

Glue (Qty. 1) Flat Tip Allen Wrench (Qty. 1)

Tools required: Flat tip Allen wrench (provided) and Phillips screwdriver (not provided).

Assembly Instructions

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,

go back and fully tighten all bolts. This will make the assembly easier.

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Attach the Knobs (9) to the front side of drawers using the provided Knob Bolts (10) and tighten with a

Phillips screwdriver.

3. Pull the side drawers all the way out, then push the plastic release lever of the ball bearing slide up on one

side and down on the other side, and then pull the both side drawers completely out.

NOTE: You must remove the both side drawers to attach the legs (J and K).

10 10

Assembly Instructions

4. Turn the Desk Top (I) upside down as shown.

5. Attach the Left and Right Legs (J and K) to the Desk Top (I) by using the Wood Dowels (3).

6. Insert the 35 mm Bolts (6) with the Lock Washers (7) and Flat Washers (8) from inside of desk apron

through the pre-drilled holes and screw into threaded inserts in the Legs (J and K). As shown.

7. Stick one Rubber Pad (11) onto the bottom of each leg (J and K) as shown.

8. Ask for assistance to stand the unit upright and position it at the desired location.

9. Now, insert the removed side drawers into Desk Top (I). To place the drawer back, simply push the ball

bearing cart all the way to the end of the slides (on both sides), and align the slide runners on the

drawers with the slides track on the unit. Push it carefully inside until it stops.

NOTE: If the drawer does not go smoothly, please take it out and repeat the step.

678

678J/K

J/K

Assembly Instructions

10. Locate the Fixed Shelf (F), Outside Panels (A and B), Inner Side Panels (D and E) with the holes facing up.

Securely screw the Cam Bolts (2) into the designated small holes by a Phillips screwdriver, as shown.

11. Insert two Wood Dowel (3) into the large holes of Upper Dividers (C). Tap it in with a rubber mallet, if

necessary. Make sure that you use a small amount of glue with both ends of all dowels.

12. Align the drilled holes on the Fixed Shelf (F) with the inserted Wood Dowels (3) on the Upper Dividers (C),

and then press them together. Insert two 38 mm

Screws

(4) through the countersunk holes on the Fixed

Shelf (F) and securely screw into the Upper Dividers (C). As shown.

Assembly Instructions

13. Insert four Wood Dowels (3) into the top inner holes on the Lower Inner Side Panels (D and E) and attach

them to the Fixed Shelf (F) by engaging four Cam Locks (1) (Refer to page 3 on Cam Lock system

operation supplement). As shown.

14. Align and attach the Bottom Panels (G) to the Left and Right Inner Panels (D and E) respectively by using

four Wood Dowels (3) and four Cam Locks (1). As shown.

Assembly Instructions

15. Using the pilot holes as a guide, fasten the Back Panel (H) to the previous assembly with four 38 mm

Screws (4) as shown.

16. Insert twelve Wood Dowels (3) into the drilled large holes of last assembly at both ends.

17. Align the large holes on the Left Outside Panel (A) with the inserted Wood Dowels (3), then firmly press

them together and fasten it in place by engaging six Cam Locks (1).

18. Repeat last step to attach Right Outside Panel (B) at the opposite end.

A/B

Inhaltsverzeichnis

Sprachen:

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen 19WTFL-SPCA Bedienungsanleitung

Whalen

Whalen BRA7PD-E Bedienungsanleitung

Whalen

Whalen SIG3IN1CGT Bedienungsanleitung

Whalen

Whalen Mainstays MS18-03-1011-02 Bedienungsanleitung

Whalen

Whalen Kellum WMFP54EC-26GR Bedienungsanleitung

Whalen

Whalen Greenwich Computer Desk with Hutch Bedienungsanleitung

Whalen

Whalen AVC-22E Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC7PD-1N Bedienungsanleitung

Whalen

Whalen Victory VIC7PD Bedienungsanleitung

Whalen

Whalen ODUS-TWVD Bedienungsanleitung

Whalen

Whalen WSMTB63-W Bedienungsanleitung

Whalen

Whalen Laminate 44" High Console Bedienungsanleitung

Whalen

Whalen SMXL-6 Bedienungsanleitung

Whalen

Whalen SPLS-TU48CD Bedienungsanleitung

Whalen

Whalen Emergent SPUS-EGDB Bedienungsanleitung

Whalen

Whalen BBAVC48-SMB Bedienungsanleitung

Whalen

Whalen WHA-10005 Bedienungsanleitung

Whalen

Whalen PRO-9 Bedienungsanleitung

Whalen

Whalen AVCEC65-TC Bedienungsanleitung

Whalen

Whalen Fallbrook SPUS-FBPS-GM Bedienungsanleitung

Whalen

Whalen Bayside CSC7PD-2B-UK Bedienungsanleitung

Whalen

Whalen Asherton File SPUS-ASHF Bedienungsanleitung

Whalen

Whalen Bayside CSC72BK-7 Bedienungsanleitung

Whalen

Whalen Bayside CSC72LC-1 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung