Whalen Emergent SPUS-EGDB Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2018-04-02 Rev. 0001-A Factory: CHHOME

Emergent Gaming Desk

Model # SPUS-EGDB

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP

POINTS, SHARP EDGES AS RECEIVED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASE

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Emergent Gaming Desk

MODEL # SPUS-EGDB

MADE IN CHINA

M A X I M U M R E C O M M E N D E D W E I G H T L O A D S

MAXIMUM LOAD 50 lb. (22.7 kg)

MAXIMUM LOAD 200 lb. (90.8 kg)

THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM

WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS

INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.

MAXIMUM LOAD 10 lb. (4.5 kg)

Important

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 6 and 7 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED

OFF WITH DAMP CLOTH.

Insert the Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam

Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam

Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam.

You are now ready to assemble the KD unit.

FINAL

1 2 43

FURNITURE POWER DISTRIBUTION CENTER

IMPORTANT SAFETY INSTRUCTIONS

Carefully read all instructions installing and operating fixture

IF YOU HAVE ANY QUESTIONS REGARDING THE PROPER INSTALLATION

CONSULT A QUALIFIED ELECTRICIAN.

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR

INJURY TO PERSONS, PLEASE FOLLOW THE NEXT:

 Use only insulated staples or plastic ties to secure the cords.

 Route and secure cords so that they will not be pinched or damaged when the desk is pushed to the wall.

 Make sure cord is not pinched between desk and floor.

 Use the unit for indoor use only.

 Do not use an extension cord to connect this unit to a wall outlet.

 Use power strip with integral over current protection to supply other electrical devices or accessories in

desk.

 This unit must be plugged into a properly grounded outlet.

 The socket-outlet should be installed near the equipment and should be easily accessible.

 Maximum load of connected equipment cannot exceed a total of 12 amps and 120 volts.

 Do not open or disassemble this unit for any reason.

SAVE THESE INSTRUCTIONS

Furniture Power Distribution Unit User Guide

Please read this user guide before installing and using your power distribution Center.

INTRODUCTION

The integrated power and USB center offers 480 Mbps

high transmission rate and can connect up to three

devices, such as a digital camera, MP3 player, cell

phone or wireless mouse.

SPECIFICATIONS

cULus listed, rated for: 120 V ac, 12 A, 60 Hz

NOTES

 To reach USB 2.1 high speed, your computer or host

adapter card must support USB 2.1. This hub is also

backwards compatible with USB 1.1.

 When using the hub with a computer that has a version

1.1 USB interface, all of the devices attached to the hub

will run at USB 1.1 speed.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation.

If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV

technician for help.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2)

this device must accept any interference received,

including interference that may cause undesired

operation.

CAN ICES-3 (B)/NMB-3(B)

This Class B digital apparatus complies with Canadian

ICES-003.

WARNINGS

! Your hub automatically shuts off any port with a low

or excessive current.

! If USB Hub Current Limit Exceeded appears on your

screen, disconnect the affected USB device, click

Reset on the screen, and reconnect the device.

! If one of your hub ports is disabled, but USB Hub

Current Limit Exceeded does not appear:

 Disconnect and reconnect the affected device.

 If the port still does not work, disconnect the hub

and the device, and then reconnect.

! Keep your desktop hub dry; if it gets wet, wipe it dry

immediately.

! Do not modify or tamper with your desktop hub’s

internal components. It may cause a malfunction and

invalidate its warranty.

! Modifications not approved by the party responsible

for compliance could void user’s authority to operate

the equipment.

Product: Furniture Power Distribution Unit

Model No: HG3000-DBU

Company: Whalen Furniture Manufacturing

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Desk Top (Qty. 1) B- Left Pedestal Top Front Panel (Qty. 1) C- Left Pedestal Bottom Panel (Qty. 1)

D- Left Pedestal Left Side Panel E- Left Pedestal Right Side Panel F- Right Pedestal Top Front Panel

(Qty. 1) (Qty. 1) (Qty. 1)

G- Right Pedestal Bottom Panel H- Right Pedestal Left Side Panel I- Right Pedestal Right Side Panel

(Qty. 1) (Qty. 1) (Qty. 1)

J- Modesty Panel (Qty. 1) K- Pedestal Top Back Panel (Qty. 2) L- Metal Stretcher (Qty. 1)

M- Keyboard Tray (Qty. 1) N- Keyboard Tray Molding (Qty. 1) O- Adjustable Shelf (Qty. 2)

P- Side Back Panel (Qty. 2) Q- Leg (Qty. 4) R- Cup Holder (Qty. 1) S- Metal Bracket (Qty. 1)

T- Cable Wheel U- Power Center V- Left Slides W- Right Slides

(Qty. 2) (Qty. 1) (Qty. 1) (Qty. 1)

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

(1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel

(Qty. 25+1 extra) (Qty. 25+1 extra) (Qty. 32+1 extra)

(4) M3.5 x 15 mm Screw (5) M4 x 25 mm Screw (6) M4 x 50 mm Screw

(Qty. 45+2 extra) (Qty. 3+1 extra) (Qty. 12+1 extra)

(7) Shelf Pin (8) M6 x 15 mm Bolt (9) M6 x 28 mm Bolt

(Qty. 8+1 extra) (Qty. 20+1 extra) (Qty. 8+1 extra)

(10) Lock Washer (11) Flat Washer (12) Small Bolt (13) Small Cord Clip

(28+1 extra) (28+1 extra) (Qty. 4+1 extra) (Qty. 4)

(14) Large Cord Clip (15) Grommet Glue Hex wrench

(Qty. 1) (Qty. 3) (Qty. 1) (Qty. 1)

Tools required: Hex wrench (included) and Phillips screwdriver (not included).

Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Screw the Cam Bolts (2) into the designated small holes on the Side Panels (D and I).

3. Screw the Cam Bolts (2) into the designated small holes on the Left Pedestal Right Side Panel (E) at

both sides.

4. Attach two Small Cord Clips (13) to the Side Panel (E) with two 15 mm Screws (4) in each.

E/H

Assembly Instructions

5. Screw the Cam Bolts (2) into the designated small holes on the Right Pedestal Left Side Panel (H) at

both sides.

6. Attach two Small Cord Clips (13) to the Side Panel (H) with two 15 mm Screws (4) in each.

7. Attach the Left Pedestal Top Front and Back Panels (B and K) between the Left Pedestal Side Panels (D

and E) with the 30 mm Wood Dowels (3) and the Cam Locks (1) (Refer to page 3 on Cam Lock system

operation supplement).

Left Pedestal Assembling

8. Attach the Left Pedestal Bottom Panel (C) to the Side Panels (D and E) with four 30 mm Wood Dowels

(3) and six 50 mm Screws (6).

9. Attach the Legs (Q) to the Bottom Panel (C) with eight 15 mm Bolts (8) and eight Washers (10 and 11).

Inhaltsverzeichnis

Sprachen:

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen BBAVC48-SMB Bedienungsanleitung

Whalen

Whalen The Pioneer Woman PWS336158813017 Bedienungsanleitung

Whalen

Whalen Mainstays MSD036158813001 Bedienungsanleitung

Whalen

Whalen BJAVCL65-3 Bedienungsanleitung

Whalen

Whalen WSMTB63-W Bedienungsanleitung

Whalen

Whalen Bayside MLDR Bedienungsanleitung

Whalen

Whalen MainStays Parsons Bedienungsanleitung

Whalen

Whalen ATD60H-13AX Bedienungsanleitung

Whalen

Whalen LLAVC48C Bedienungsanleitung

Whalen

Whalen Bayside CSC72BK-7 Bedienungsanleitung

Whalen

Whalen ECOM-RPD Bedienungsanleitung

Whalen

Whalen Breckenridge Executive Chair Bedienungsanleitung

Whalen

Whalen Belmont 2-in-1 Work Station Bedienungsanleitung

Whalen

Whalen Hendricks Series Bedienungsanleitung

Whalen

Whalen Midland Twin over Full Bunk Bed Bedienungsanleitung

Whalen

Whalen BSKY-368036 Bedienungsanleitung

Whalen

Whalen Santa Fe Writing Desk Bedienungsanleitung

Whalen

Whalen WS-NIR-722484-5S Bedienungsanleitung

Whalen

Whalen Mainstays MS18-03-1011-02 Bedienungsanleitung

Whalen

Whalen Bayside Furnishing 1644994 Bedienungsanleitung

Whalen

Whalen Asherton File SPUS-ASHF Bedienungsanleitung

Whalen

Whalen Springfield SPLS-SPMDBK-HW Bedienungsanleitung

Whalen

Whalen BBAVCWL60-BC Bedienungsanleitung

Whalen

Whalen VANITY WITH TOP WF30CVG Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung