Whalen Belmont 2-in-1 Work Station Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Whalen Furniture Mfg., Inc. Page 1 Factory No. 16015

Belmont 2-in-1 Work Station

Model # JCS101104-C

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP

POINTS, SHARP EDGES AS RECEIVED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to [email protected]

LOT NUMBER:

DATE PURCHASED: / /

Model # JCS101104-C

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 2 Factory No. 16015

Important

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 3 and 4 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF

WITH DAMP CLOTH.

Insert Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the pre-drilled small holes on the panel. Connect both panels together; making sure

the Cam Bolt goes into the pre-drilled hole at the end of the panel with the Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole in the panel. Make sure the arrow on the Cam Lock is

pointed towards the Cam Bolt.

3. Once the Cam Bolt is connected inside the Cam Lock, take a Phillips screwdriver (not included) and

tighten the Cam Lock clockwise.

4. Plug the Cam Lock Cover into the cross slot of the Cam Locks to conceal the cam.

You are now ready to assemble the KD unit.

Model # JCS101104-C

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 3 Factory No. 16015

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Desk Top (1) B- Desk Right Side Panel (1) C- Desk Right Side Molding (1)

D- Modesty Panel (1) E- Cabinet Top Panel (1) F- Cabinet Left Side Panel (1)

G- Cabinet Side Molding (2) H- Cabinet Right Side Panel (1) I- Right Slide Support (1)

J- Fixed Shelf (1) K- Bottom Panel (1) L- Bottom Front Molding (1)

M- Cabinet Crossbar (1) N- Left Slide Support (1) O- Hinge Support (2)

P- Adjustable Shelf (1) Q- Door Panel (1) R- Cabinet Back Panel (1)

S- Drawer Front (1) T- Drawer Back Panel (1) U- Drawer Left Side (1)

V- Drawer Right Side (1) W- Drawer Bottom Panel (1) CL- Left Slide Track (1)

Model # JCS101104-C

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 4 Factory No. 16015

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

CR- Right Slide Track (1) DL- Left Slide Runner (1) DR- Right Slide Runner (1)

(1) Small Cam Lock (2) Large Cam Lock (3) Cam Bolt (4) M8 x 30 mm Wood Dowel

(4+1 extra) (38+1 extra) (40+2 extra) (38+1 extra)

(5) 5/8” Bolt (6) Lock Washer (7) Flat Washer (8) #6 x 1/2” Zinc Screw

(8+1 extra) (8+1 extra) (8+1 extra) (8+1 extra)

(9) #6 x 1/2” Black Screw (10) #8 x 1-1/4” Screw (11) #6 x 5/8” Screw (12) Magnetic Catch

(12+1 extra) (12+1 extra) (2+1 extra) (1)

(13) #6 x 1/2” Pan Head Screw (14) Cam Lock Cover (15) Shelf Pin (16) Metal Bracket

(21+1 extra) (20+1 extra) (4+1 extra) (2)

(17) Door Hinge (2 sets) (18) Knob (2) (19) Knob Bolt (2)

Glue (1) 4 mm Allen Wrench (1) Touch-up Pen (1)

Tools required: Allen Wrench (provided), Phillips screwdriver and Hammer (not provided).

Model # JCS101104-C

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 5 Factory No. 16015

Utility Drawer Assembling

1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Place the Drawer Front (S) on a level and protective surface with the holes facing up. Securely screw 4

Cam Bolts (3) into the designated small holes, as shown in the illustration.

3. Attach the Drawer Left and Right Side Panels (U and V) to the Drawer Front (S) by engaging four

Small Cam Locks (1) (Refer to page 2 on Cam Lock system operation supplement). Make sure that the

grooves face inward and line up with each other.

4. Slide the Drawer Bottom Panel (W) all the way into the grooves with the finished surface up.

Model # JCS101104-C

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 6 Factory No. 16015

Utility Drawer Assembling

5. Fasten the Drawer Back Panel (T) to the Drawer Side Panels (U and V) using four 1-1/4” Screws (10).

Make sure that the Drawer Bottom Panel (W) fits securely into the groove of the Drawer Back Panel (T).

Tighten all the screws with a Phillips screwdriver.

6. Using the pilot holes as a guide, align and attach the Left Slide Runner (DL) to the Drawer Left Side

Panel (U) using three 1/2” Black Screws (9). Make sure that the roller end of Slide Runner faces

backward. Tightly fasten with a Phillips screwdriver.

7. Repeat the last step to attach the Right Slide Runner (DR) to the Drawer Right Side Panel (V).

Model # JCS101104-C

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 7 Factory No. 16015

Assembly Instructions

8. Attach the Knob (18) to the outside of the Drawer Front (S) using one Knob Bolt (19) provided.

9. Place the Desk Top (A), the Desk Side Panel Molding (C), the Cabinet Top Panel (E) and the Cabinet

Side Moldings (G) on a level and protective surface with the holes facing up. Securely screw the Cam

Bolts (3) into the designated small holes, as shown in the illustration.

Model # JCS101104-C

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 8 Factory No. 16015

Assembly Instructions

10. Insert four Wood Dowels (4) into the side holes of one Cabinet Side Molding (G). Tap in with a rubber

mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels.

NOTE: It is very important to use a small amount of glue on both ends of dowels.

11. Align the inserted Cam Bolts (3) and Wood Dowels (4) on the Cabinet Side Molding (G) with the end

holes of the Cabinet Left Side Panel (F) and then press them together. Make sure that the outer surfaces

are flush with each other. Fasten the Cabinet Side Molding (G) to the Left Side Panel (F) by engaging 4

Large Cam Locks (2) (Refer to page 2 on Cam Lock system operation supplement).

12. Insert two Wood Dowels (4) into the large holes on Left Slide Support (N) and attach it to the Cabinet

Left Side Panel (F). Make sure that the front pilot hole on the Slide Support is close to the Cabinet Side

Molding (G). Insert two 1-1/4” Screws (10) through the countersunk holes of the Slide Support (N) and

securely screw into the Cabinet Left Side Panel (F), using a Phillips screwdriver.

13. Fasten two Hinge Supports (O) to the Cabinet Left Side Panel (F) using four 1-1/4” Screws (10) into the

countersunk holes. Make sure that the pilot holes are close to the Left Side Molding (G).

FRONT

Model # JCS101104-C

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 9 Factory No. 16015

Assembly Instructions

14. Using the pilot holes as a guide, fasten the Door Hinge Base (17) to each Hinge Support (O) with two

1/2” Zinc Screws (8). Make sure that the slot on the top of Hinge Base faces the Cabinet Side Molding

(G).

15. Align and attach the Left Slide Track (CL) to the Left Slide Support (N) using three 1/2” Black Screws

(9) through the small holes on the track and screw into the pilot holes. As shown below. Tightly fasten

with a Phillips screwdriver.

16. Securely screw 5 Cam Bolts (3) into the designated small holes on the Left Side Panel (F), as shown in

the illustration.

Model # JCS101104-C

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 10 Factory No. 16015

Assembly Instructions

17. Align and attach the other Cabinet Side Molding (G) to the Cabinet Right Side Panel (H) by using four

Wood Dowels (4) and four Large Cam Locks (2). Make sure that the outer surfaces are flush with each

other.

18. Fasten the Right Slide Support (I) to the Cabinet Right Side Panel (H) by using two Wood Dowels (4)

and two 1-1/4” Wood Screws (10). Make sure that the front pilot hole on the Slide Support is close to the

Cabinet Side Molding (G).

FRONT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen Springfield SPLS-SPMDBK-HW Bedienungsanleitung

Whalen

Whalen SIG3IN1CGT Bedienungsanleitung

Whalen

Whalen Santa Fe Writing Desk Bedienungsanleitung

Whalen

Whalen WF24FVB Bedienungsanleitung

Whalen

Whalen Shelby 60in Bedienungsanleitung

Whalen

Whalen AVC78H-13AX Bedienungsanleitung

Whalen

Whalen SPUS-LDHL-LF Bedienungsanleitung

Whalen

Whalen Cecile ODUS-48CD-B Bedienungsanleitung

Whalen

Whalen Hendricks Series Bedienungsanleitung

Whalen

Whalen PRO-9 Bedienungsanleitung

Whalen

Whalen WSC72-MW Bedienungsanleitung

Whalen

Whalen WSZB184872-GW5BMS Bedienungsanleitung

Whalen

Whalen LWF30AVG Bedienungsanleitung

Whalen

Whalen NOLAHBST Bedienungsanleitung

Whalen

Whalen BBAVT27-MBC Bedienungsanleitung

Whalen

Whalen WSMTB63-W Bedienungsanleitung

Whalen

Whalen Stetson SMSSDSK Betriebsanleitung

Whalen

Whalen Bayside CSC72TC-10 Bedienungsanleitung

Whalen

Whalen Jasper Chrome & Glass Pier Bedienungsanleitung

Whalen

Whalen LLAVC48C Bedienungsanleitung

Whalen

Whalen Trimble Bookcase ECOM-TR30BK Bedienungsanleitung

Whalen

Whalen Seymour BJAVCLSM-65 Bedienungsanleitung

Whalen

Whalen The Pioneer Woman PWS336158813017 Bedienungsanleitung

Whalen

Whalen Fallbrook SPUS-FBSF-GM Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung