Whalen WMCXL-2 Bedienungsanleitung

Whalen Furniture Mfg. Inc. Page 1 Factory No. 33-10944

44” 3-in-1 Console (WMCXL-2)

This item is designed to be 3-in-1 configuration. Please choose which of the 3 options suits your

needs. DO NOT discard any of the hardware or parts that you will not use on your set option, this

will give you the opportunity to use this TV Console for different configurations in case you decide

to upgrade your TV set in the future.

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if you are missing parts, do not return this item to

the Retailer Store. Please call our toll-free customer service number and have your instructions

and parts list ready to provide the model name, part name or factory number:

1-866-942-5362 8:30 a.m. - 4:30 p.m. PST, Monday - Friday

ONLINE: www.whalenfurniture.com EMAIL: [email protected]

Video Instruction Guides

Go to http://whalen.showuhow.com to view step-by-step instructional

videos for assembling and installing your product. Enter the following

product number on the ShowUhow homepage.

LOT NUMBER:

DATE PURCHASED: / /

Option 1

With Swinging Floater

XL-2 or WMCXL-2

Model # WMCXL-2

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 2 Factory No. 33-10944

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

MANUFACTURER: Whalen Furniture

CATALOG: 44” 3-in-1 Console (WMCXL-2)

DATE OF MANUFACTURE: December, 2010

MADE IN CHINA

FITS UP TO MOST 50” FLAT PANEL TV’S

MAXIMUM LOAD 135 lb. (61.2 kg)

FITS UP TO MOST 50” FLAT PANEL TV’S

WITHOUT SWIVELING BRACKET

MAXIMUM LOAD 135 lb. (61.2 kg)

MAXIMUM LOAD 50 lb. (22.7 kg)

1. Please read the Assembly Instructions prior to assembling this product.

2. Remove all hardware from box and sort by size.

3. Check to see that all hardware and parts are present BEFORE assembling.

4. Ask a friend to assist you with the assembly of this furniture.

5. To avoid damage, assemble the product on a sturdy, level and protective surface.

6. Please wait until all steps are completed before tightening bolts.

7. Make sure all bolts are tightly fastened before the unit is used.

THIS UNIT IS INTENDED FOR USE ONLY WITH THE PRODUCTS

AND MAXIMUM WEIGHTS INDICATED. USE WITH OTHER PRODUCTS OR PRODUCTS

HEAVIER THAN THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY

CAUSING POSSIBLE INJURY. THE BASE OF THE TELEVISION MUST BE PLACED

SQUARELY IN THE CENTER OF THE STAND WITH NO OVERHANGING ON EITHER SIDE.

IMPORTANT INFORMATION

GENERAL INFORMATION, TIPS & TRICKS

This product is sold with Tip Restraint Hardware kit. You must install the Tipping Restraint

Hardware between the wall and the TV stand to prevent any accidents or damages. When

properly installed, this restraint can provide protection against the unexpected tipping of the

unit due to small tremors, bumps or climbing. The restraint is only a deterrent and is not a

substitute for proper adult supervision. Use of tip-over restraints may only reduce, but not

eliminate, the risk of tip-over.

Model # WMCXL-2

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 3 Factory No. 33-10944

Parts and Hardware List

Please read completely through the instructions and verify that all parts listed are present

before beginning assembly.

A-Top Shelf Frame (1) B- Middle Shelf Frame (1) C- Bottom Shelf Frame (1)

D- Long Spine (1) D1- Short Spine (1) E- Left “L” Shape Leg (1)

F- Left Front Leg (1) G- Right “L” Shape Leg (1) H- Right Front Leg (1)

I- Top Glass Shelf (1) J- Middle Glass Shelf (1) K- Bottom Glass Shelf (1)

L- Swiveling Bracket (1) M- XYZ Mounting Frame (1) N- Monitor Bracket (2)

O- Safety Bar (1) P- Decorative Rail (2)

Model # WMCXL-2

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 4 Factory No. 33-10944

Parts and Hardware List

(1) - Suction Cup (2) - 3/4” Bolt (3) - 1 1/4” Bolt (4) - Hex Nut

(20+1 extra) (18+1 extra) (16+1 extra) (4+1 extra)

(5) -Black Lock Washer (6) - Zinc Lock Washer (7) –Black Flat Washer (8) - Zinc Flat Washer

(14+1 extra) (14+1 extra) (18+1 extra) (14+1 extra)

(9)- Large Flat Washer (10) - 2 1/2” Lag Bolt (11) - Concrete Anchor (12) - Cable Control

(6) (6) (6) (2)

(13) - 1” Bolt Open Wrench Allen Wrench Tipping Restraint Hardware Kit (1)

(4+1 extra) (1) (1) (Inside Plastic Bag)

TV Mounting Kit

M4 x 12 Bolt (4) M4 x 30 Bolt (4) M5 X 12 Bolt (4) M5 x 30 Bolt (4)

M6 x12 Bolt (4) M6 x 35 Bolt (4) M8x16 Bolt (4) M8 x40 Bolt (4)

M4 Lock Washer (4) M5 Lock Washer (4) M6 Lock Washer (4) M8 Lock Washer (4)

Large Spacer (4) Small Spacer (4) M4/M5 Flat Washer (8) M6/M8 Flat Washer (4)

Tools required: Allen Wrench (provided) and Open Wrench (provided), Phillips Head

Screwdriver, Mallet, Power Drill, 3/8” & 3/16”Drill Bit, Socket Wrench Adapter with

Socket Set, 1/2” Masonry Bit for brick concrete, Stud Sensor.

Model # WMCXL-2

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 5 Factory No. 33-10944

Assembly Instructions

Note: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,

go back and fully tighten all bolts. This will make it easier during assembly of unit.

1. Unpack the unit and confirm that you have all the hardware and parts required.

2. Align the bottom bracket holes of Left “L” Shape Leg (E) with the sockets on the Left Front

Leg (F). Make sure the upper tube of “L” Shape Leg fits into the cutout of Left Front Leg

properly. Attach in place by inserting two 3/4” Bolts (2) with Black Washers (5 & 7) into the

bracket holes. Tighten the bolts with the Allen Wrench provided. See detail #1.

3. Repeat last step to combine the Right “L” Shape Leg (G) with Right Front Leg (H) together.

4. Attach 2 Decorative Rails (P) to the bottom of Long Spine (D) using six 1 1/4” Bolts (3).

Tighten with the Allen Wrench provided. See detail #1A. (Note: If you choose table-top

configuration, please ignore this step.)

Required hardware in this step

Description: (2) –3/4” Bolt (3) –1 1/4” Bolt (5) –Black Lock Washer (7) –Black Flat Washer

Sketch

Qty. (4 pcs) (6 pcs) (4 pcs) (4 pcs)

Tools required: Allen Wrench

Model # WMCXL-2

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 6 Factory No. 33-10944

Assembly Instructions

5. Choose the option suits your needs. Locate Long Spine (D) or Short Spine (D1) and set

back face down on a scratch free surface as shown in detail #2.

6. Align the holes on back rail of 3 Shelf Frames (A, B & C) with the sockets on the Spine.

Insert and screw 1 1/4”Bolts (3) with Zinc Lock Washers & Flat Washers (6 & 8) through the

pre-drilled holes on back rail into the Spine. Make sure the corner plates for Suction Cup on

each Shelf Frame will face up after assembly. See detail #2.

Required hardware in this step

Description: (3) –1 1/4” Bolt (6) –Zinc Lock Washer (8) –Zinc Flat Washer

Sketch

Qty. (6 pcs) (6 pcs) (6 pcs)

Tools required: Allen Wrench

Model # WMCXL-2

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 7 Factory No. 33-10944

Assembly Instructions

7. Stand the unit upright.

8. Align and attach Left Leg Assembly to the Top Shelf Frame (A) using two 1” Bolts (13) with

Zinc Washers (6 & 8) through the pre-drilled holes on inner side rail into the top of both Legs.

See detail #3. DO NOT tighten the bolts.

9. Secure Left Leg Assembly to Middle & Bottom Shelf Frame (B & C) using the 1 1/4” Bolts (3)

with Zinc Washers (6 & 8) from inside the shelf frame into the sockets included on the side

of Legs. See detail #3A.

10.Repeat last 2 steps to attach Right Leg Assembly at the other end.

Required hardware in this step

Description: (13)- 1” Bolt (3) –1 1/4” Bolt (6) –Zinc Lock Washer (8) –Zinc Flat Washer

Sketch

Qty. (4 pcs) (4 pcs) (8 pcs) (8 pcs)

Tools required: Allen Wrench

Model # WMCXL-2

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 8 Factory No. 33-10944

Assembly Instructions

11.Go back and tighten all bolts with Allen Wrench provided.

12.In case of uneven floor, Floor Levelers are provided at the bottom of both Front Legs (F & H).

Simply tilt the unit back and raise or lower floor leveler by hand to correct tilting as shown in

detail #4.

Hardware provided Tools required

Pre-attached Floor Leveler No tool required

If you choose Table-top configuration,

continue to STEP 13.

If mounting TV with the Swinging Floater,

skip ahead to PAGE 12.

Model # WMCXL-2

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 9 Factory No. 33-10944

Assembly Instructions for Table-top

13.Attach 2 Cable Controls (12) onto the backside of Spine (D1) with the 3/4” Bolts (2). Tighten

the bolts with the Allen Wrench provided. See detail #5.

14.The Cable Controls (12) enable you to shorten, separate and route cables and cords. Using

the Cable Controls you can create a system for routing cables through channels, between

components and to power sources without usual tangled mess or annoying signal

interference. As shown in detail #5.

Required hardware in this step

Description: (2) - 3/4” Bolt (12) –Cable Control

Sketch

Qty. (4 pcs) (2 pcs)

Tools required: Allen Wrench

Model # WMCXL-2

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 10 Factory No. 33-10944

Assembly Instructions for Table-top

15.Put Suction Cups (1) firmly into the top holes and corner plates on 3 Shelf Frames (A, B & C)

as shown in detail #6.

16.Place Top Glass (I) and Glass Shelves (J & K) in place as shown in detail #6. Make sure the

glass is properly centered and the black side of glass is down. Push each glass all the way

back against the Spine. Also, be sure to press down evenly and firmly each glass onto the

Suction Cups to make sure they securely rest onto the Suction Cups.

Note: Make sure that the Suction Cups go all the way into the pre-drilled holes to prevent the

glass shelf from falling and getting damage. If glass is scratched you can minimize the

damage by using a BLACK marker and filling in scratched area from underneath.

Required hardware in this step

Description Sketch Qty.

(1) –Suction Cup (20 pcs)

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen Asherton SPUS-ASHD Bedienungsanleitung

Whalen

Whalen HOCSFC-13AX Bedienungsanleitung

Whalen

Whalen Springfield SPLS-SPMDBK-HW Bedienungsanleitung

Whalen

Whalen HO48CD-13AXV2 Bedienungsanleitung

Whalen

Whalen SPCA-MMPD Bedienungsanleitung

Whalen

Whalen 53SNR2301BAS Bedienungsanleitung

Whalen

Whalen LLAVC48C Bedienungsanleitung

Whalen

Whalen Wesleyan Drop Lid Secretary Bedienungsanleitung

Whalen

Whalen Fallbrook SPUS-FBPS-GM Bedienungsanleitung

Whalen

Whalen Bayside CSC72AC-6 Bedienungsanleitung

Whalen

Whalen Astoria WC-459 Bedienungsanleitung

Whalen

Whalen Industrial Metal and Wood Tool Cart Bedienungsanleitung

Whalen

Whalen WSCSC6172WB Bedienungsanleitung

Whalen

Whalen BBXL54NV Bedienungsanleitung

Whalen

Whalen WSHDFOW Bedienungsanleitung

Whalen

Whalen Bayside CSC72BK-7 Bedienungsanleitung

Whalen

Whalen WSZB244872-SV5MS Bedienungsanleitung

Whalen

Whalen Bayside FURNISHINGS CSC7PD-8-2PC Bedienungsanleitung

Whalen

Whalen Emergent SPUS-EGDB Bedienungsanleitung

Whalen

Whalen Midland Twin over Full Bunk Bed Bedienungsanleitung

Whalen

Whalen STCA48GD Bedienungsanleitung

Whalen

Whalen Bayside CSC7PD-5 Bedienungsanleitung

Whalen

Whalen Marlee Twin over Full Bunk Bed Bedienungsanleitung

Whalen

Whalen Santa Fe Writing Desk Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung