Whalen WSF48MS26GAO Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2019-06-25 Rev. 0001-A

Millstead 48in Fireplace Console

Model # WSF48MS26GAO

# WSF48MS26WW

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASE

IMPORTANT

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and

non-abrasive surface. You will need the parts identified on page 3 and 4 of this instruction manuals.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH THE DOWELS. EXCESS GLUE CAN BE WIPED

OFF WITH A DAMP CLOTH.

Insert dowel at least half way by tapping lightly with a rubber mallet (not included), IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the pre-drilled small holes on the panel. Connect both panels together; making sure

the Cam Bolt goes into the pre-drilled hole at the end of the panel with the Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole in the panel. Make sure the arrow on the Cam Lock is

pointed towards the Cam Bolt.

3. Once the Cam Bolt is connected inside the Cam Lock, take a Phillips screwdriver (not included) and tighten

the Cam Lock clockwise.

4. Plug the Cam Lock Cover into the cross slot of the Cam Locks to conceal the cam.

You are now ready to assemble the KD unit.

How to adjust the European adjustable hinges on doors

Shipping may cause doors to go out of alignment. If you find that the doors need to be adjusted slightly,

turn the appropriate screw, as illustrated.

1. TO ADJUST DOOR FORWARD OR BACKWARD.

2. TO ADJUST DOOR TO RIGHT OR TO LEFT.

3. TO ADJUST DOOR UP OR DOWN.

GLUE

FINAL

1 2 43

1234

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (Qty. 1) B- Fixed Shelf (Qty. 1) C- Bottom Panel (Qty. 1)

D- Left Side Panel (Qty. 1) E- Right Side Panel (Qty. 1) F- Left Partition Panel (Qty. 1)

G- Right Partition Panel (Qty. 1) H- Middle Crossbar (Qty. 1) I- Middle Left Stile (Qty. 1)

J- Middle Right Stile (Qty. 1) K- Base Front Molding (Qty. 1) L- Base Front Stretcher (Qty. 1)

M- Base Rear Stretcher (Qty. 1) N- Adjustable Shelf (Qty. 4) O- Firebox Support (Qty. 1)

P- Door (Qty. 2) Q- Middle Back Panel (Qty. 1) R- Left Back Panel (Qty. 1)

S- Right Back Panel (Qty. 1) T- Glass Door Insert (Qty. 2) U- Mesh Trim (Qty. 2)

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

V- Wood Door Insert (Qty. 2) Fireplace Insert (Qty. 1) Remote Control with Battery (Qty. 1)

(Pre-attached)

(1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel

(Qty. 32+1 extra) (Qty. 32+1 extra) (Qty. 37+1 extra)

(4) M3.5 x 12 mm Screw (5) M3.5 x 15 mm Washer Head Screw (6) M4 x 38 mm Screw (7) M3.5 x 15 mm Pan Head Screw

(Qty. 20+1 extra) (Qty. 34+1 extra) (Qty. 12+1 extra) (Qty. 8+1 extra)

(8) M4 x 50 mm Screw (9) Mending Plate (10) L-shaped Metal Bracket (11) Handle

(Qty. 4+1 extra) (Qty. 2) (Qty. 2) (Qty. 2)

(12) 5/32’’ x 22 mm Bolt (13) Shelf Support (14) Acrylic Stopper (15) Cam Cover

(Qty. 4+1 extra) (Qty. 16+1 extra) (Qty. 1) (Qty. 8+1 extra)

(16) Rubber Bumper Glue Touch-up Pen Tipping Restraint Hardware Kit (Qty. 2)

(Qty. 4+1 extra) (Qty. 1) (Qty. 1) (Included in plastic bag)

Tools required (not included): Phillips screwdriver, stud finder, pencil, tape measure, power drill and 1/8 in

drill bit.

Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw the Cam Bolts (2) into the designated small holes on the Fixed Shelf (B), Bottom Panel (C)

and Partition Panels (F and G) with a Phillips screwdriver.

NOTE: Screw-in cam bolts must be screwed down flush.

3. Insert two Wood Dowels (3) into the inner holes on the long edge of Middle Crossbar (H) and each

Partition Stile (I and J). Make sure that you use a small amount of glue with both ends of all dowels.

NOTE: It is very important to use a small amount of glue on both ends of dowels.

Assembly Instructions

4. Align and attach the Middle Crossbar (H) to the Fixed Shelf (B) by engaging three Cam Locks (1) (Refer

to page 2 on Cam Lock system operation supplement).

5. Align and attach the Middle Left Stile (I) to the Left Partition Panel (F) by engaging two Cam Locks (1).

Assembly Instructions

6. Align and attach the Middle Right Stile (J) to the Right Partition Panel (G) by engaging two Cam Locks

(1).

7. Glue the Wood Dowels (3) into the inner holes of Fixed Shelf (B), Bottom Panel (C), Partition Panels (F

and G), Base Front Stretcher (L) and Base Rear Stretcher (M) as shown.

NOTE: Do Not Insert the wood dowels into the cam bolts holes

FGB

Assembly Instructions

8. Attach the Fixed Shelf (B) beween the Partition Panels (F and G) by engaging four Cam Locks (1).

9. Align and attach the Base Front Stretcher (L) to the Bottom Panel (C) with four Cam Locks (1).

BF/G

Assembly Instructions

10. Align and attach the Base Rear Stretcher (M) to the Bottom Panel (C) with three Cam Locks (1).

11. Using the wood dowels as a guide, firmly press the assembled Partition Panels (F and G) to the Bottom

Panel (C) and fasten them in place with four 50 mm Screws (8). Fully tighten the screws with a Phillips

screwdriver.

Assembly Instructions

12. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A) and Side Panels (D

and E) with a Phillips screwdriver.

13. Glue the Wood Dowels (3) into the inner holes on both Side Panels (D and E) and the Base Front Molding

(K) as shown.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen BJXL-2 Bedienungsanleitung

Whalen

Whalen WMCPRO-9 Bedienungsanleitung

Whalen

Whalen WSF60RV26DO Bedienungsanleitung

Whalen

Whalen SMXL-6 Bedienungsanleitung

Whalen

Whalen WSLW48IFV Bedienungsanleitung

Whalen

Whalen Jaxon 3-in-1 XL-27EL Bedienungsanleitung

Whalen

Whalen ATD60H-13AX Bedienungsanleitung

Whalen

Whalen Bayside Furnishings MLTOFBB Bedienungsanleitung

Whalen

Whalen MainStays Parsons Bedienungsanleitung

Whalen

Whalen 19WTFL-SPCA Bedienungsanleitung

Whalen

Whalen WF36EVB Bedienungsanleitung

Whalen

Whalen AVC78H-13AX Bedienungsanleitung

Whalen

Whalen PRO-9 Bedienungsanleitung

Whalen

Whalen SPUS-LDHL-LF Bedienungsanleitung

Whalen

Whalen O'nin White Room Divider Bedienungsanleitung

Whalen

Whalen BBAVCD54N Bedienungsanleitung

Whalen

Whalen Mainstays MS18-03-1011-02 Bedienungsanleitung

Whalen

Whalen Santa Fe Writing Desk Bedienungsanleitung

Whalen

Whalen Bayside FURNISHINGS CSC7PD-8-2PC Bedienungsanleitung

Whalen

Whalen BBHC60DBC Bedienungsanleitung

Whalen

Whalen XLDEC54-NV Bedienungsanleitung

Whalen

Whalen SFKCWWR Bedienungsanleitung

Whalen

Whalen Bayside Furnishings Braeden CSC7PD-7 Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSCRD-02-WLVN Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung