Whalen Jaxon 3-in-1 XL-27EL Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Whalen Furniture Manufacturing Page 1 Factory No. 10944

Date 2015-03-03 Rev. 1 Factory: FOCIDI

Jaxon 3-in-1TM TV Stand

Model # XL-27EL

U.S. Patents 8,079,311 & 8,191,485

This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your

needs. DO NOT discard any of the hardware or parts that you will not use on your chosen option.

This will allow you to use this TV Console in different configurations at a later date, if desired.

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our customer service number and have your instructions

and parts list ready to provide the model name, part name or factory number:

1-866-942-5362 8:30 a.m. - 4:30 p.m., PST, Monday - Friday

ONLINE: www.whalenstyle.com EMAIL: parts@whalenfurniture.com

On-line Video Instruction Guides

Go to http://vig.sellpoints.com to view step-by-step instructional

videos for assembling and installing your product. Enter the

following product number on the website under Whalen brand.

LOT NUMBER:

DATE PURCHASED: / /

XL-27EL

XL-27

Model # XL-27EL

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 2 Factory No. 10944

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Jaxon 3-in-1TM TV Stand (XL-27EL)

DATE OF MANUFACTURE: March 2015

MADE IN CHINA

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Modifications not approved by the party responsible for compliance could void user’s authority to operate the

equipment.

MAXIMUM RECOMMENDED WEIGHT LOADS

MAXIMUM LOAD 50 lb. (22.6 kg)

PLACE TV BEHIND THE STOPPER

RECOMMENDED FLAT PANEL TV RANGE: 42” –70”

MAXIMUM LOAD 135 lb. (61.2 kg)

RECOMMENDED FLAT PANEL TV RANGE: 42” –65”

WITHOUT DELUXE SWIVELING BRACKET

MAXIMUM LOAD 135 lb. (61.2 kg)

THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY

WITH FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE

AND WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT

PANEL TVS OR EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE

CENTRE OF THE UNIT; THE BASE OF THE TELEVISION MUST BE ABLE TO REST ON THE

SUPPORTING SURFACE OF THE UNIT WITHOUT OVER-HANGING THE EDGES.

IMPROPERLY POSITIONED FLAT PANEL TVS, OR FLAT PANEL TVS OR OTHER

EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND WEIGHT LIMITS COULD FALL OFF

OR BREAK THE UNIT

CAUSING POSSIBLE SERIOUS INJURY.

Model # XL-27EL

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 3 Factory No. 10944

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware

are present before beginning assembly.

A- Top Panel w/Metal Frame (1) B- Middle Shelf Frame (1)

C- Bottom Shelf w/Metal Frame (1) D- Floater Post (1)

E- Back Frame (1) F- Left Leg (1) G- Right Leg (1)

H- Middle Glass Shelf (1) I- Swiveling Bracket (1)

J- Mounting Frame (1) K- Monitor Bracket (2) L- Cable Wheel (2)

(1) 1/2” Bolt (2) 5/8” Bolt (3) 1” Bolt (4) 1-3/4” Bolt

(4+1 extra) (8+1 extra) (8+1 extra) (4+1 extra)

Model # XL-27EL

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 4 Factory No. 10944

Parts and Hardware List

(5) 2-1/4” Bolt (6) Hex Nut (7) Lock Washer (8) Flat Washer

(8+1 extra) (4+1 extra) (24+1 extra) (24+1 extra)

(9) 2-1/2” Lag Bolt (4) (10) Large Flat Washer (4+1 extra) (11) Concrete Anchor (4)

(12) Glass Bumper (6+1 extra) (13) Acrylic Stopper (1) Touch-up Pen (1)

Open Wrench M4 Allen Wrench 3/16” Allen Wrench Tipping Restraint Hardware Kit (1)

(1) (2) (1) (Inside Plastic Bag)

TV Mounting Kit

M4 x 12 Bolt (4) M4 x 30 Bolt (4) M5 x 12 Bolt (4) M5 x 30 Bolt (4)

M6 x 12 Bolt (4) M6 x 35 Bolt (4) M8 x 16 Bolt (4) M8 x 40 Bolt (4)

M4 Lock Washer (4) M5 Lock Washer (4) M6 Lock Washer (4) M8 Lock Washer (4)

Large Spacer (4) Small Spacer (4) M4/M5 Flat Washer (8) M6/M8 Flat Washer (4)

Tools required: Allen wrench, open wrench (provided) and Phillips screwdriver (not provided).

Model # XL-27EL

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 5 Factory No. 10944

Assembly Instructions

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,

go back and fully tighten all bolts. This will make the assembly easier.

1. Unpack the unit and confirm that you have all the hardware and required parts.

2. Locate the Back Frame (E) on a level and protective surface with the flush surfaces facing up.

As shown.

3. Align and attach the Top and Bottom Shelf Frames (A and C) to the Back Frame (E) with four

1” Bolts (3). Make sure that the wood panel will face up when the unit is turned upright.

4. Fasten the Middle Shelf Frame (B) to the Back Frame (E) with two 1-3/4” Bolts (4). As shown.

1-3/4” Bolt

(2 used in this step)

④

A/C

1” Bolt

(4 used in this step)

③

Model # XL-27EL

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 6 Factory No. 10944

Assembly Instructions

5. Align and attach Right Leg (G) to the Bottom Shelf Metal Frame (C) using two 5/8” Bolts (2)

with the Washers (7 and 8) through the metal brackets and loosely screw into place. As shown.

6. Insert one 1-3/4” Bolt (4) through the drilled hole on the side rail of Middle Shelf Frame (B) and

screw into the Right Leg (G). As shown. DO NOT tighten the bolt.

7. Repeat the same procedure to attach the Left Leg (F) at the opposite end.

1-3/4” Bolt

(2 used in this step)

④

F/G

278

F/G

Flat Washer

(4 used in this step)

⑧

Lock Washer

(4 used in this step)

⑦

5/8” Bolt

(4 used in this step)

②

Model # XL-27EL

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 7 Factory No. 10944

Assembly Instructions

8. Fasten the Legs (F and G) to the Top Metal Frame (A) by inserting four 1” Bolts (3) with the

Washers (7 and 8) through the drilled holes of the top rail of legs and screw into place.

9. Go back and tighten all bolts with the provided Allen Wrench.

F/G

Flat Washer

(4 used in this step)

⑧

Lock Washer

(4 used in this step)

⑦

1” Bolt

(4 used in this step)

③

Model # XL-27EL

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 8 Factory No. 10944

Assembly Instructions

10.Stand the unit upright.

11.Evenly place the Glass Bumpers (12) onto the Middle Shelf Frame (B), as shown above.

12.Place the Glass Shelf (H) onto the Glass Bumpers (12). Push the glass shelf all the way back

against the Back Frame.

Glass Bumper

(6 used in this step)

⑫

If you choose Table-top Console

configuration, continue to the next step.

If mounting TV with the Floating Swivel

Mount, skip ahead to PAGE 12.

Model # XL-27EL

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 9 Factory No. 10944

Assembly Instructions for Table-top Console

13.Attach 2 Cable Wheels (L) to the backside of the Back Frame (E) with the 5/8” Bolts (2) and

tighten with the enclosed Allen wrench.

NOTE: You can use the Cable Wheels to help keep the entertainment center’s cables and

cords organized.

14.The USB Hub is pre-attached at the bottom round hole of the Back Frame (E) when shipping.

Also, you can put it between the top and middle shelves as needed. To change the location of

USB hub, you need to interchange it with the upper round grommet on the Back Frame (E).

5/8” Bolt

(4 used in this step)

②

Model # XL-27EL

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 10 Factory No. 10944

Assembly Instructions for Table-top Console

NOTE: You must install the Acrylic TV Stopper to prevent TV from tipping when placing your flat

panel television directly on the table-top console.

15. Remove the tape of Acrylic Stopper (13) and place it in the cut-out of the acrylic stopper

template on the front of Top Panel (A). Make sure it is properly aligned before applying

pressure.

16. Remove the acrylic stopper template from the Top Panel (A) carefully.

Acrylic Stopper

(1 used in this step)

⑬

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen BJXL-2 Bedienungsanleitung

Whalen

Whalen Asherton File SPUS-ASHF Bedienungsanleitung

Whalen

Whalen Belmont 2-in-1 Work Station Bedienungsanleitung

Whalen

Whalen Trimble Bookcase ECOM-TR30BK Bedienungsanleitung

Whalen

Whalen Kendal Chair Gray Bedienungsanleitung

Whalen

Whalen Sonoma Ridge Desk Bedienungsanleitung

Whalen

Whalen Bayside FURNISHINGS 369333 Bedienungsanleitung

Whalen

Whalen Crestwood MNFP68CW30MB Bedienungsanleitung

Whalen

Whalen Amesville MNFP50AV26IA Bedienungsanleitung

Whalen

Whalen Parker Series Bedienungsanleitung

Whalen

Whalen Triton Wood Veneer Bookcase Bedienungsanleitung

Whalen

Whalen DME5233FPC-BRM Wartungshandbuch

Whalen

Whalen PROL-37 Bedienungsanleitung

Whalen

Whalen Bayside Furnishings MLTOFBB Bedienungsanleitung

Whalen

Whalen WSF48SY26C Bedienungsanleitung

Whalen

Whalen Bayside CSC7PD-12 Bedienungsanleitung

Whalen

Whalen Bayside CUS54WD-6 Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC72LBK-6 Bedienungsanleitung

Whalen

Whalen Braxton 7-pc Dining Set Bedienungsanleitung

Whalen

Whalen Marilla OD-MA48PD Bedienungsanleitung

Whalen

Whalen WSF54BF23-3 Bedienungsanleitung

Whalen

Whalen Mainstays MS18-03-1011-02 Bedienungsanleitung

Whalen

Whalen Bayside 126678 Bedienungsanleitung

Whalen

Whalen Annual Event WMFP41BT-2 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung