Whistler D16VRS Bedienungsanleitung
D16VRS
User Guide
AUTOMOTIVE
DIGITAL VIDEO RECORDER
3
1. Camera Lens
2. Speaker
3. Status LEDs
4. LCD Display
5. Reset Button
6. Microphone
7. Mini HDMI Jack
8. Bracket Mount
9. USB Jack
10. OK Button
11. Mode Button
12. Lock Button
13. Power Button
14. Micro SD Card slot
15. UP Button
16. Menu Button
17. Down Button
14
15
12 3 4
985 6
16
10
11
12
7
13 17
PRODUCT INTRODUCTION
Features
4
Button and Function
1. Camera Lens – 170º wide-angle lens.
2. Speaker – Provides audio for playback and device
tones.
3. Status LED – BLUE = power on, RED = charging,
Flashing Blue = Recording
4. LCD Display – View photo and video.
5. Reset Button – Using a small pin, push in to reset
the device.
6. Microphone – Audio receiver for video recording.
7. Mini HDMI Jack – Provides connection to a HDMI
monitor.
8. Bracket Mount – windshield bracket attachment.
9. USB Jack – Allows PC interface to access microSD
card, PC camera and charge the battery.
10. OK / Record Button – Press to start recording.
Press again to stop. In menu, selects highlighted
items.
FEATURE DESCRIPTION
5
11. Mode Button – Press to switch modes: Video,
Camera, Play back.
12. Lock Button – Manually protects files.
13. Power Button – Press and hold to power ON/OFF
Can also be briefly pressed during operation to
temporarily put display into screen saver.
14. MicroSD Card Slot – Slot for memory card.
15. UP Button – Press UP to zoom in. In Menu allows
scrolling of menu items.
16. MENU Button – Press button to display menu
settings.
17. Down / Mute Button - Press DOWN to zoom out.
In Menu, allows scrolling of menu items. When
zoomed out, mutes audio.
FEATURE DESCRIPTION
6
Designed exclusively for motor vehicles operating at 12
or 24 volts DC.
Inserting a micro SD Card
Before initial use, insert a micro SD card. (Suggest at
least a 4GB card (Class 6 minimum), up to 32GB)
Charging the Unit
Fully charge DVR for initial use by:
• 12 volt Car charger
• PC USB port
The status LED is red during charging.
NOTE: Turn DVR off before inserting or removing the
micro SD card.
OPERATIONS
7
OPERATIONS
Installing the Windshield Bracket
The included windshield bracket securely places the
DVR onto the vehicle’s windshield.
Follow the procedure below to secure the bracket:
1. Insert the threaded collar into the bracket mounting
point on top of the DVR and tighten until snug.
(Threaded collar may be used to insure bracket its
snugly tightened.)
2. If applicable, remove protective film from the suction
cup.
3. Clean the selected area of the windshield for
mounting using a quality glass cleaner.
4. Press the bracket onto the windshield. To secure
the suction cup press the locking tab toward the
windshield.
5. Loosen the knob on the bracket to adjust the angle
of the DVR. Tighten knob securely to secure the
DVR’s position.
STEP 1
STEP 5
STEP 4
Threaded Collar
Adjustable Knob
8
Power Connection in Vehicle
1. Plug the mini USB end of the vehicle power cord into
the USB jack of the DVR.
2. Insert the other end of the power cord into the
vehicle’s lighter socket/power port.
NOTE: Unit will automatically turn on and start
recording when power is applied. It will turn off when
power is removed.
Power ON/OFF
Power On: Press and hold to turn on. Blue Status
LED illuminates.
Power Off: Press and hold to turn off.
NOTE: The unit will automatically power OFF after the
low battery warning is displayed.
OPERATIONS
STEP 1
STEP 2
9
OPERATIONS
Initial Settings
Date & Time Setting
1. Once connected with car charger, the device will start
power ON and start recording. Press the OK button to
switch into standby mode.
2. Press the MENU button twice then Press the or to
select Date/Time. Press OK to enter into setting.
3. Press or to choose the specific number, press OK to
enter into next setting. Once finished with settings, press
MENU button to return to DVR operation.
MENU Settings
There are 3 available levels; Video , Camera , and
Playback .
NOTE: Video or Camera menus have different option
selections. Use the MODE button to select the correct
level.
4. Press the menu button to see available settings.
5. Press the or to scroll through the settings.
6. Press OK to make a selection.
10
Recording Image
1. Take Picture: Press MODE (M) button. Camera icon
will be displayed in upper left corner.
2. Press OK to take an image.
OPERATIONS
Recording or Review a Video or Image
Recording Video
1. Power on: Press and hold to turn on DVR.
2. The icon is shown in the top left corner with a blinking
red dot when recording. Press OK to stop recording if
desired.
NOTE: When powered externally the DVR will automatically be
in Video Record mode and begin recording after initial power
ON.
Video Mode
Video Segmentation
Time
Exposure
Compensation
Microphone
Date Time
Video Time Remaining
Video Resolution
Internal Memory SD
Card Icon will show
when installed
Battery (Charging Shown)
Parking Guard
Camera Mode
Exposure
Compensation
Auto White Balance
ISO
Motion
Picture Count
Video Resolution
Internal Memory SD
Card Icon will show
when installed
Battery
(Charging Shown)
High Dynamic Range G-Sensor
Inhaltsverzeichnis
Andere Whistler DVR Handbücher
Whistler
Whistler D2200S Bedienungsanleitung
Whistler
Whistler D14VR Bedienungsanleitung
Whistler
Whistler D2200 Bedienungsanleitung
Whistler
Whistler D12VR Bedienungsanleitung
Whistler
Whistler D19VR Bedienungsanleitung
Whistler
Whistler D28RS Bedienungsanleitung
Whistler
Whistler D12VRS Bedienungsanleitung
Whistler
Whistler D16VR Bedienungsanleitung
