White Rodgers 1F97-51 Bedienungsanleitung

OPERATION GUIDE

7-Day Programmable Electronic

Digital Thermostat

1F97-51

WHITE-RODGERS

Operator: Save this booklet for future use!

About Your New Thermostat . . .

Your new White-Rodgers Digital Thermostat uses the technology of a solid-state microcomputer

to provide precise time/temperature control. This thermostat offers you the flexibility to design

heating and cooling programs that fit your needs.

Pleasereadthismanualthoroughlybeforeoperatingorprogrammingyourthermostat.Ifyouhave

questions, write to us at the address shown on the back cover of this manual.

Operator: Save this

booklet for future use!

ENTERING YOUR PROGRAM

Set Current Time and Day

SelectHeatingandCoolingTemperatures

Program Heating/Cooling Times and

Heating Temperatures

Program Cooling Temperatures

Using the HOLD/COPY Button

CHECK YOUR PROGRAMMING

QUESTIONS AND ANSWERS................ 31

YOUR NEW THERMOSTAT’S

FEATURES ........................................... 4

OPERATING YOUR THERMOSTAT ........ 5

PARTS OF THE THERMOSTAT

The Back Of the Thermostat Body

The Display

The Thermostat Buttons

OPERATING FEATURES

PROGRAMMING YOUR

THERMOSTAT ................................... 16

PLANNING FOR YOUR NEEDS

In This Guide . . .

• Seven independent day programming

• Simultaneousheatandcoolprogramstorage

• Fourseparatetime/temperaturesettingsper

24-hour period

• Computed Energy Management Recovery

(EMR)

• Armchair programming capability

• Backlit LCD displays continuous set point,

time, and room temperature

• 1.5 volt “AA” Energizer®alkaline battery

backup

• Preprogrammed temperature control

YOUR NEW THERMOSTAT’S FEATURES

• Adjustable cycle times

• Compressor short cycle protection

• Programmable blower control

• Blower delay in the cooling cycle

• Audio and visual prompting during operation

• Two hour temperature override

• Manual program override (HOLD tem-

perature)

•°F/°C convertibility

• Temperature range 40°to 99°F

OPERATINGYOURTHERMOSTAT

Before you begin programming your thermo-

stat, you should be familiar with its features

and with the display and the location and

operation of the thermostat buttons. The in-

formation in this section will help you become

familiar with your new thermostat so that you

can easily program it.

Your thermostat consists of two parts: the ther-

mostat body and the subbase.

Remove power from the system at the

circuit breaker/fuse box before remov-

ing or attaching the thermostat body.

Equipment damage and/or personal in-

jury could occur.

Thesubbaseisattachedtothewall,butyoucan

remove the thermostat body for easy program-

ming. To remove the thermostat body from the

subbase, grasp the thermostat body and gently

pull it straight out from the subbase. To attach

the thermostat body, line up the two terminal

pinsonthelowersectionofthethermostatback

with the matching connector on the subbase.

Insert these, then gently pivot the thermostat

bodyuptoconnectthesixpinconnectorsonthe

upper portion of the thermostat back. Gently

push until the snap connectors engage. DO

NOTFORCEORPRYTHETHERMOSTAT,as

this may damage the unit.

CAUTION

PARTS OF THE THERMOSTAT

The Back of The Thermostat Body

Turnthe thermostat body over.On the back are

the 3 “AA” Energizer®alkaline batteries.

The “AA” Energizer®alkaline batteries provide

powertothethermostatwhenthe24VACpower

is interrupted (for example, when you remove

the thermostat from the wall for programming).

Freshbatterieswillmaintainthestoredprogram

for approximately a year. If power loss is long

enough for the program to be lost, the thermo-

stat will automatically return to the factory pro-

grammedtemperatures(64°Fheatingand82°F

cooling) when power is restored. You must

reprogram the thermostat if this happens.

If the word BATTERY is flashing in the display

BACK OF THERMOSTAT BODY

2-pin connector

6-pin connector Batteries

W14 S3

window, the batteries are low and should be

replaced with fresh “AA” Energizer®alkaline

batteries.

Use

SYSTEM

SWITCH

to turn thermostat OFF be-

fore removing thermostat from the wall

to replace the batteries.

Other than and , the buttons are

locatedbehindthethermostatdoor.Toopenthe

door,useyourfingernailintheindentationatthe

top of the door to pull it out from the top, then

swing it down on its hinges.

On the following pages there are brief descrip-

tions of the display and the thermostat buttons.

CAUTION

The Display

Continuouslydisplayssystemmode(HEAT,

OFF,COOL,HOLD).Duringprogramming,

the day of the week is displayed (MON,

TUE, WED, etc.).

Alternately displays room temperature (F

denotesdegreesFahrenheitandCdenotes

degrees Celsius) and time of day (Ade-

notes AM time and Pdenotes PM time).

Displays the setpoint temperature.

InVIEWTEMPmode,A,B,C,andDarethe

1st, 2nd, 3rd, and 4th heating or cooling

temperatures available for programming.

The word BATTERY flashes on the display

when the “AA” alkaline batteries are weak

and should be replaced. The word BAT-

TERYisdisplayedcontinuously(non-flash-

ing) when thermostat is running on battery

power only.

FAN ON is displayed when the blower is

operating continuously. FAN AUTO is dis-

playedduringautomaticfanoperation(when

theblowercycleswiththeheatingorcooling

system).

ABFAN AUTO FAN ON

FAN AUTO

BATTERY

SYSTEM

SWITCH

FAN

SWITCH

HEAT-OFF-COOL

TIME

FWD

TIME

BACK

SET

CLOCK

ADV

DAY

VIEW

PRGM

VIEW

TEMP

HOLD

COPY

RUN

PRGM

ON-AUTO

WHITE-RODGERS

DIGITAL COMFORT SET II

1 32

6 6 2 5

The Thermostat Buttons

Sets the system mode (HEATing, OFF, or

COOLing).

Selects fan operation (see #6, above). This

buttonisalsousedtoprogramthefantorun

continuously during a program period.

Runs display forward or backward through

time, day, or anticipation settings during

programming.

Used with TIME

FWD and TIME

BACK to set current time

and day of the week.

Used during programming to set the day of

theweektobeprogrammed.Alsousedwith

SET

CLOCK to enter anticipation setting mode.

Used to initiate or review thermostat pro-

gramming.

Used to select heating and cooling tem-

peratures to be programmed.

Used to manually override programming to

holdataselectedtemperature(whenHOLD

is displayed). Also used to copy one day’s

programming into another (when COPY is

displayed).

Used to start program operation after pro-

gramming. Also used to return thermostat to

programoperationafterbeinginHOLDmode.

(Red arrow) Raises temperature setting

(99°F or 37°C maximum).

Inhaltsverzeichnis

Andere White Rodgers Thermostat Handbücher

White Rodgers

White Rodgers 1F85-275 Bedienungsanleitung

White Rodgers

White Rodgers 1F86-241 Bedienungsanleitung

White Rodgers

White Rodgers 1F95-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F78 Bedienungsanleitung

White Rodgers

White Rodgers 1C30(W) Bedienungsanleitung

White Rodgers

White Rodgers Comfort-Set 1F95-371 Bedienungsanleitung

White Rodgers

White Rodgers 1C26 Bedienungsanleitung

White Rodgers

White Rodgers 1F58 Bedienungsanleitung

White Rodgers

White Rodgers 1F82-0261 Bedienungsanleitung

White Rodgers

White Rodgers 1F95-1277 Bedienungsanleitung

White Rodgers

White Rodgers 1F97W-51 Bedienungsanleitung

White Rodgers

White Rodgers 1E30-373 Bedienungsanleitung

White Rodgers

White Rodgers 1F82-0261 Bedienungsanleitung

White Rodgers

White Rodgers EMERSON 1.00E+78 Bedienungsanleitung

White Rodgers

White Rodgers 1F90-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F80-261 Bedienungsanleitung

White Rodgers

White Rodgers 1F95EZ-0671 Bedienungsanleitung

White Rodgers

White Rodgers Comfort-Set 90 Bedienungsanleitung

White Rodgers

White Rodgers 1D51 Bedienungsanleitung

White Rodgers

White Rodgers 1F81-261 Bedienungsanleitung

White Rodgers

White Rodgers 1.00E+78 Bedienungsanleitung

White Rodgers

White Rodgers 1E56N-444 Bedienungsanleitung

White Rodgers

White Rodgers EMERSON BLUE 1F98EZ-1421 Bedienungsanleitung

White Rodgers

White Rodgers 1F85RF-275 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung