White Rodgers Comfort-Set 90 Bedienungsanleitung

INTRODUCTION

Thank you for purchasing

your new Comfort-Set 90

Series thermostat. Your new

White-Rodgers thermostat

uses solid state micro-

computer technology to

provide precise time/tem-

perature control. This ther-

mostat offers the flexibility

to design heating and cooling

programs that fit your needs.

Adaptable to most 24 volt

residential forced air, multi-

stage (1F95-377 or 1F95-371)

or heat pump systems with

electric or fossil fuel auxil-

iary (1F95-377 or 1F94-371).

You will find information

about thermostat buttons and

display in the component

section beginning on page 2.

Introduction Orientation Configuration Programming Features Index

Instructions for optional

thermostat configuration

begin on page 4. Program-

ming information begins on

page 7. Descriptions of the

thermostat’s features begin

on page 13.

We have also added thumb

tabs to help you find sections

of the manual.

ORIENTATION

THE THERMOSTAT BUTTONS

See inside front cover for illustration

showing button locations.

1(Blue arrow) Lowers temperature

setting (45°F or 7°C minimum)

2(Red arrow) Raises temperature

setting (99°F or 37°C maximum)

3The multi-color indicator glows:

green for 1st stage, yellow for 2nd stage,

red for emergency heat and flashing

red for malfunction condition in

system.

This button (on top of the cover)

lights the display.

Used to initiate or review thermo-

stat programming or advance to next

program period in programming mode.

Used with TIME

FWD

/TIME

BACK

to set the clock.

Used to adjust the time backward,

or to select the previous menu item.

Used to adjust the time forward, or

to select the next menu item.

Used with TIME

FWD

/TIME

BACK

to set the current day.

Used to advance operation to the

next program period or advance to the

next day in programming mode.

Used to manually override

programming to hold at a selected

temperature.

Used to enter and configure the

VACATION mode.

Selects fan operation (see The

Display

). This button is also used

to program the fan to run continuously

during a program period.

14 Used to set the filter change-out

time, or to reset the filter change timer.

15 Sets the system mode (HEATing,

EMERgency (Heat Pump models

only), OFF, COOLing, or AUTO-

matic changeover).

Used to adjust the clock one hour

forward or back.

Used to start or return to program

operation.

FAN AUTOHRS

CHECK BATTERY STAT SYSTEM

°F

MON

PRG

FAN ON

HEATHEAT

HRS

CHECK BATTERY

°F

MON WED THU FRI SAT SUNTUEWED THU FRI SAT SUNTUE

18 18

19 20 21 21

2324

Figure 1. The Display

THE DISPLAY

18 Displays system mode (HEAT,

EMER, OFF, COOL, AUTO,

HOLD, or VACA). During program-

ming displays the time period (MOR,

DAY, EVE, NHT) being pro-

grammed.. In the configuration menu,

the menu item name is shown, one

word at a time (PRGM MODE,

EMR, COOL FAN DELA OFF, etc.).

CHECK STAT appears when the

thermostat detects certain problems

within itself. CHECK SYSTEM

appears when the thermostat detects

certain problems in heating or cooling

the system.

Indicates the length of time

remaining in a temporary hold

condition. Also indicates the length of

time remaining in VACATION mode.

21 Displays FAN ON when the fan is

operating continuously. Displays FAN

AUTO when the fan cycles with the

heating or cooling system. Displays

PRG FAN ON when fan is pro-

grammed to be on during a period.

22 Displays the setpoint temperature.

Alternately displays room

temperature and time of day.

24 Shows the current day of the week.

When programming, shows the day(s)

being programmed.

25 The word HEAT or COOL will

appear above or below the setpoint if

area 18 is needed to display other

information.

Orientation

The configuration menus allow you to

set certain thermostat operating

characteristics to your system or

personal requirements.

To enter the User Configuration menu,

press PROGRAM

RUN

to make sure

the thermostat is in the run program

mode, then press TIME

FWD

and

TIME

BACK

at the same time. The

display will show the first item in the

configuration menu.

The following charts (pages 5 & 6)

describe each item on the menus. Press

TIME

FWD

to move forward to the

next item in the menu or TIME

BACK

to move backward to the previous

item. Set these according to your

personal preference using or

. To enter the Keypad Lock

menu, while in the User Menu, press

and hold TIME

FWD

and TIME

BACK

for at least two seconds.

To exit either menu and return to

normal operation, press PROGRAM

RUN

. To re-enter to the User menu at

any time press PROGRAM

RUN

then press TIME

FWD

and TIME

BACK

at the same time. While in the

menus, if you do not press any buttons

for two minutes, the thermostat will

revert to normal operation.

CONFIGURATION

Step Press Button(s) Displayed Press or to select: COMMENTS Ref

(Factory Default) Page

0 °F

(room temperature) 5 LO to

5 HI

2EMR

(ON) OFF

or ON L

Adjusts temperature display higher or lower.

3(°F) °C

Adjusts temperature display to °F or °C.

4SET FAN

(0) 0 - 6 HRS

5BEEP

(ON) OFF

6HEAT FAST

(OFF) ON

7COOL FAST

(OFF) ON

8TEMP OUT

(OFF) ON

Enables outdoor temperature sensor. Requires

optional remote sensor connected to terminal OT

and remote thermistor probe.

Selects EMR option ON or OFF or L ON.

Set Fan (one shot) option. Set the duration of a

temporary fan option.

Turns keypad beeper ON or OFF.

OFF delays starting second stage for economy.

ON eliminates delay to energize second stage.

OFF delays starting second stage for economy.

ON eliminates delay to energize second stage.

TIME

and TIME

at same time

for 2 seconds

FWD

BACK

TIME

FWD

TIME

FWD

TIME

FWD

TIME

FWD

TIME

FWD

TIME

FWD

TIME

FWD

User Menu

Configuration

9FONE (Icon)

(OFF) ON

10 COMP RUN TIME

(00) (Compressor run time

in hours)

Returns to normal operation.

11 AUX RUN TIME

(00) (AUXILIARY run time

in hours)

Telephone RUN program feature. Requires optional

X10 system.

Shows accumulated time compressor has run.

To reset to 00, press and .

Shows accumulated time AUXILIARY has run.

To reset to 00, press and .

PROGRAM

RUN

TIME

FWD

TIME

FWD

TIME

FWD

Step Press Button(s) Displayed Press or to select: COMMENTS Ref

(Factory Default) Page

PART LOCK

(OFF) ON

2LOCK

(OFF) ON

Partial Keypad lockout OFF or ON.

Returns to normal operation.

Total Keypad lockout OFF or ON.

PROGRAM RUN

TIME

and TIME

(hold for two

seconds)

FWD

BACK

TIME FWD

Keypad Lockout Menu (access from User Menu)

User Menu (Continued)

PROGRAMMING

MANUAL OPERATION

Your Comfort-Set III thermostat can be

used to control temperature manually

(without programming). For manual

operation, press

SYSTEM

to select

HEAT or COOL, then press PRO-

GRAM

HOLD

. Use or to

set the temperature as desired.

PROGRAMMED OPERATION

Planning Your Program

The sample schedule (page 9) shows

the factory installed programs for

heating and cooling. The heating and

cooling programs are separate, and

must be programmed individually. To

use the factory program, set the clock

and press PROGRAM

RUN

with the

thermostat

SYSTEM

set to Heat, Cool,

or Auto.

Fill out the blank schedule (page 10)

with the time and temperatures you

want in your program. Fill in every

space for your program.

The same temperature can be repeated

more than once if you do not want the

temperature to change over several

time periods.

Entering Your Program

To Set the Clock:

1. Press PROGRAM

RUN

2. Press SET

TIME

. The display will

show the hour. Use TIME

FWD

TIME

BACK

to set to the current hour

and AM/PM designation.

3. Press SET

TIME

again. The

display will show minutes. Use TIME

FWD

or TIME

BACK

to set to the

current minutes.

4. Press PROGRAM

RUN

To Set the Day:

5. Press SET

DAY

. The display will

indicate a day of the week. Use TIME

FWD

or TIME

BACK

to set to the

current day of the week.

6. Press PROGRAM

RUN

To Set the Program:

7. Press

SYSTEM

to select HEAT (for

heating program) or COOL (for

cooling program).

8. Press PROGRAM

VIEW

one time.

The display will show MOR, the

settings for time and temperature and

MON.

9. If you program Monday the first

time you press PROGRAM

VIEW

will be copied to the rest of the week.

To program the other days of the week

press

ADV.

/DAY to until you reach

the day you wish to change and follow

Programming

Steps 10, 11 & 12. You can also copy

the program from one day to another.

To copy, press

HOLD

/COPY. The

display will show COPY, and all the

other days of week will be flashing.

Press

HOLD

/COPY again to copy the

day in to the rest of the week or press

TIME

FWD

or TIME

BACK

until

you reach the day you want to copy to

and press

HOLD

/COPY.

10.Press TIME

FWD

or TIME

BACK

to set the time on the display as

selected in your HEATING or

COOLING SCHEDULE. Be sure to

check the AM or PM on the display.

11.Press the red or blue

key to adjust the temperature to match

your schedule. If you want the fan ON

continuously during this period, press

FAN

12.Press PROGRAM

VIEW

one time.

MOR on the display will change to

DAY. Repeat steps 10 and 11 to enter

time and temperature for this period.

13.Press PROGRAM

VIEW

continue through the entire schedule,

entering time and temperature for each

period. When you are satisfied that

your program matches your schedule,

press PROGRAM

RUN

. Program-

ming is now complete for this mode

and your program is running.

14.To program the other mode, repeat

the procedure from step 6.

62°F (16°C)

5:00 PM

5:00 PM 10:00 PM

10:00 PM

62°F (16°C)

MON

TUE

WED

THU

FRI

SAT

SUN

6:00 AM 70°F (21°C) 8:00 AM 70°F (21°C)

5 6 5 6 5 6 5 6

2 3 4

Programming

1Morning (MOR)

2Day (DAY)

Evening (EVE)

4Night (NHT)

5Start Time

Temperature

7-Day Sample HEAT Program Schedule

(Shows factory programming)

82°F (27°C)

5:00 PM

5:00 PM 10:00 PM

10:00 PM

85°F (29°C)

MON

TUE

WED

THU

FRI

SAT

SUN

6:00 AM 78°F (25°C) 8:00 AM 78°F (25°C)

5 6 5 6 5 6 5 6

2 3 4

1Morning (MOR)

2Day (DAY)

Evening (EVE)

4Night (NHT)

5Start Time

Temperature

7-Day Sample COOL Program Schedule

(Shows factory programming)

Dieses Handbuch passt für folgende Modelle

Andere White Rodgers Thermostat Handbücher

White Rodgers

White Rodgers 1F81-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F56 Series Bedienungsanleitung

White Rodgers

White Rodgers 1F95W-80 Bedienungsanleitung

White Rodgers

White Rodgers 1F83-51 Bedienungsanleitung

White Rodgers

White Rodgers 1F92W-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F94W-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F95-0680 Bedienungsanleitung

White Rodgers

White Rodgers 1F83-277 Bedienungsanleitung

White Rodgers

White Rodgers 1E30N-910 Bedienungsanleitung

White Rodgers

White Rodgers 1F95-1280 Bedienungsanleitung

White Rodgers

White Rodgers 1F94-80 Bedienungsanleitung

White Rodgers

White Rodgers 1F95-1291 Bedienungsanleitung

White Rodgers

White Rodgers 1F85-277 Bedienungsanleitung

White Rodgers

White Rodgers 1F87-361 Bedienungsanleitung

White Rodgers

White Rodgers NP100 Verdrahtungsschema

White Rodgers

White Rodgers 1F80-0224 Bedienungsanleitung

White Rodgers

White Rodgers 1F83-0422 Bedienungsanleitung

White Rodgers

White Rodgers 1F80-361 Bedienungsanleitung

White Rodgers

White Rodgers 1F83-0471 Bedienungsanleitung

White Rodgers

White Rodgers Thermostat Bedienungsanleitung

White Rodgers

White Rodgers 1F82-261 Bedienungsanleitung

White Rodgers

White Rodgers 1F97-1277 Bedienungsanleitung

White Rodgers

White Rodgers 1F57-306 Bedienungsanleitung

White Rodgers

White Rodgers 1F58-72 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung