White Rodgers BNP125 Verdrahtungsschema

Line Voltage Non- Programmable Thermostat

Installation Instructions & User Guide

Congratulations on the purchase of your

White-Rodgers™thermostat!

Save these instructions for future use!

Questions? Contact White-Rodgers

Customer Service at 1-877-654-9394

For BNP125, BNP150C, BNP125C, 1E65-140

37-7460A

WARNING WARNING

Before installing and operating this product, the owner and/or installer must read,

understand and follow these instructions and keep them handy for future reference.

If these instructions are not followed, the warranty will be considered null and void

and the manufacturer deems no further responsibility for this product. Moreover,

the following instructions must be adhered to in order to avoid personal injuries or

property damages, serious injuries and potentially fatal electric shocks. All electric

connections must be made by a qualied electrician, according to the electric and

building codes effective in your region. Do NOT connect this product to a supply

source other than 120 VAC or 240 VAC, and do not exceed the load limits specied.

Protect the heating system with the appropriate circuit breaker or fuse. You must

regularly clean dirt accumulations on the thermostat. Do NOT use uid to clean

thermostat air vent. Do not install thermostat in a wet place. However, installing it

in isolated walls is allowed.

Note:

When a part of the product specication must be changed to improve operability or

other functions, priority is given to the product specication itself. In such instances,

the instruction manual may not entirely match all the functions of the actual product.

Therefore, the actual product and packaging, as well as the name and illustration,

may differ from the manual.

The screen/LCD display shown as an example in this manual may be different from the

actual screen/LCD display.

1. Description

This thermostat can be used to control electric heating units such as electric

baseboards, convectors, or aeroconvectors. It keeps the temperature of a room at

the requested set point with a high degree of accuracy. This product is designed for

installations with electrical current - with a resistive load - ranging from 1.25 A to 12.5

A (120/240 VAC). It possesses a user-friendly interface. Furthermore, it gives you the

possibility to control the temperature of a room with great precision.

This thermostat is not compatible with the following installations:

• electrical current higher than 12.5 A with a resistive load (3000 W @ 240 VAC and

1500 W @ 120 VAC);

• electrical current lower than 1.25 A with a resistive load (300 W @ 240 VAC and 150

W @ 120 VAC); and

• central heating system.

Parts supplied:

• one (1) thermostat;

• wall mounting plate located at the back of the thermostat;

• two (2) mounting screws;

• two (2) solderless connectors suitable for copper wires.

2. Installation

Selection of the thermostat location The thermostat must be mounted on a

connection box on a wall facing the heating unit, at around 1.5 m (5 feet) above the

oor level, on a section of the wall exempt from pipes or air ducts.

Do not install the thermostat in a location where temperature measurements could

be altered. For example:

• close to a window, on an external wall, or close to a doorleading outside;

• exposed directly to the light or heat of the Sun, a lamp, a replace or any other heat

source;

• close or in front of an air outlet;

• close to concealed ducts or a chimney; and

• in a location with poor air ow (e.g. behind a door), or with frequent air drafts

conditions (e.g. head of stairs).

Thermostat mounting and connection

1. Cut off power supply on lead wires at the electrical

panel in order to avoid any risk of electric shock.

2. Ensure that the air vents of the thermostat are clean and clear of any obstruction.

3. Using a screwdriver, loosen the screw retaining the mounting base of the

thermostat until you feel a loose (do not completely remove the screw).

Then, remove the mounting base at the back of the thermostat by tilting it

downward, then towards you.

4. Align and secure the mounting base to the connection box using the two screws

supplied.

5. Take the wires from the wall through the hole at the base of the mounting base

and connect them using the supplied solderless connectors. When making

the connection with aluminum wire, make sure that you are using connectors

identied CO/ALR. Please note that the thermostat wires do not have polarity.

Therefore, the way they are connected is not important.

2-wire installation

4-wire installation

6. Place all the wires into the connection box.

7. Align the little slots located on the top of the thermostat

with those on the the mounting base and secure the

thermostat to the mounting base. Note that you can also

position the thermostat on the left or the right side of the

junction box (see the illustrations below). Then, tighten

the screw at the bottom of the unit.

8. Turn on the power.

9. Set the thermostat to the desired setting (see the

following section).

3. Operation

Powering on for the first time

When powering on for the rst time, the thermostat is initially set to Day mode .

The temperature is displayed in Celsius and is set at 21 degrees by default.

Temperature set points

The gures displayed above the pictogram indicate the temperature set point. It

can be displayed in degrees Celsius or Fahrenheit (see “Display in degrees Celsius/

Fahrenheit”).

ambient

temperature/

timer

heating power

used indicator

automatic mode

lock mode

fan mode

top button

pictograms

frost-free warning

day mode

night mode

bottom button

To adjust the set point, just press down the top button to increase the value, or the

bottom button to decrease it. Set points can be adjusted by increments of 0.5°C (1°F).

To quickly scroll through the set point values, press and hold down the button. The

minimum set point is 3°C (37°F), and the maximum set point is 30°C (86°F). In Day

mode, you can turn off the thermostat by lowering the set point below 3°C. The set

point value displayed will be OFF, and heating system

start up will be impossible.

Day mode and Night mode

The thermostat includes a Day mode and a Night mode , both of them having

their own independently adjustable and recorded set point. When switching from

one mode to the other, the system will automatically use the temperature set point

corresponding to the Day/Night mode selected. The standard factory set point

adjustment is 21°C (70°F) for the Day mode, and 18°C (64°F) for the Night mode.

The current Day/Night mode selection is indicated on the display by the Sun or Moon

icon. In order to manually switch from one mode to the other, simultaneously press

down the two buttons and release them immediately.

Night mode timer

The Night mode features a timer that automatically returns to the Day mode after

a selectable time period. This timer allows the temporary use of a temperature set

point. The standard factory adjustment of the timer is 8 hours. With this adjustment,

the thermostat automatically returns to Day mode 8 hours after being switched to

the Night mode. For example, if you want a night temperature lower than the day

temperature, both Day/Night mode set points will rst have to be set at the desired

temperatures. Before bedtime, the Night mode temperature set point will be

activated by switching manually to the Night mode. The timer is set for the duration

of the night. The thermostat will automatically return to the Day mode at the end

of the night, and the Day mode temperature set point, which is higher, will become

effective at this time.

Night mode timer adjustment procedure

1. If necessary, adjust the Day/Night mode set points at the desired temperatures. If

needed, switch from one mode to the other by simultaneously pressing down the

two buttons and releasing them immediately.

2. From the Night mode, simultaneously press down the two buttons for more than 3

seconds until the moon icon blinks.

3. If needed, adjust the timer by pressing down the top button to increase the value,

or the bottom button to decrease it. The adjustment range is from 1 hour to 999

hours. To quickly scroll through timer values, press and hold down the button.

4. When the adjustment is completed, release the buttons and wait for 5 seconds to

exit the adjustment function.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere White Rodgers Thermostat Handbücher

White Rodgers

White Rodgers 1F94W-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F85-275 Bedienungsanleitung

White Rodgers

White Rodgers BLUE EASY 1F86EZ-0251 Montageanleitung

White Rodgers

White Rodgers 1F83-0471 Bedienungsanleitung

White Rodgers

White Rodgers 1F82-261 Bedienungsanleitung

White Rodgers

White Rodgers 1F56W-911 Bedienungsanleitung

White Rodgers

White Rodgers P200 Verdrahtungsschema

White Rodgers

White Rodgers 1F86-0471 Bedienungsanleitung

White Rodgers

White Rodgers 1F85RF-275 Bedienungsanleitung

White Rodgers

White Rodgers 1A10 Series Bedienungsanleitung

White Rodgers

White Rodgers Comfort-Set 90 Bedienungsanleitung

White Rodgers

White Rodgers 1F81-261 Bedienungsanleitung

White Rodgers

White Rodgers 1F62-21 Bedienungsanleitung

White Rodgers

White Rodgers 1F57-306 Bedienungsanleitung

White Rodgers

White Rodgers UP400 Verdrahtungsschema

White Rodgers

White Rodgers 1F80-51 Bedienungsanleitung

White Rodgers

White Rodgers 1F87-0261 Bedienungsanleitung

White Rodgers

White Rodgers 1F70 Bedienungsanleitung

White Rodgers

White Rodgers F95-391 Bedienungsanleitung

White Rodgers

White Rodgers 1C21 Bedienungsanleitung

White Rodgers

White Rodgers 1E30(W) Bedienungsanleitung

White Rodgers

White Rodgers TYPE 151 Bedienungsanleitung

White Rodgers

White Rodgers 1F95W-80 Bedienungsanleitung

White Rodgers

White Rodgers 1.00E+78 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung