WIKA O-10 (T) Bedienungsanleitung
EN
DE
FR
ES
Operating instructions
Betriebsanleitung
Mode d'emploi
Manual de instrucciones
Pressure sensor, model O-10 (T)
Pressure sensor, model O-10
Drucksensor, Typ O-10
Capteur de pression, type O-10
Sensor de presión, modelo O-10
2WIKA operating instructions pressure sensor model O-10
EN
DE
11613017.05 09/2019 EN/DE/FR/ES
FR
ES
Operating instructions model O-10 Page 3 - 27
Betriebsanleitung Typ O-10 Seite 28 - 52
Mode d‘emploi type O-10 Page 53 - 77
Manual de instrucciones modelo O-10 Página 78 - 103
© 2011 WIKA Alexander Wiegand SE & Co. KG
All rights reserved. / Alle Rechte vorbehalten.
WIKA®is a registered trademark in various countries.
WIKA®ist eine geschützte Marke in verschiedenen Ländern.
Prior to starting any work, read the operating instructions!
Keep for later use!
Vor Beginn aller Arbeiten Betriebsanleitung lesen!
Zum späteren Gebrauch aufbewahren!
Lire le mode d'emploi avant de commencer toute opération !
A conserver pour une utilisation ultérieure !
¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!
¡Guardar el manual para una eventual consulta posterior!
3WIKA operating instructions pressure sensor, model O-10
EN
11613017.05 09/2019 EN/DE/FR/ES
1. General information 4
2. Safety 6
3. Specications 9
4. Design and function 21
5. Transport, packaging and storage 21
6. Commissioning, operation 22
7. Maintenance and cleaning 25
8. Faults 26
9. Dismounting, return and disposal 27
Contents
Declarations of conformity can be found online at www.wika.com.
Contents
4WIKA operating instructions pressure sensor, model O-10
EN
11613017.05 09/2019 EN/DE/FR/ES
1. General information
1. General information
■
The pressure sensor described in the operating instructions has been designed and manufactured using state-of-
the-art technology. All components are subject to stringent quality and environmental criteria during production.
Our management systems are certied to ISO 9001 and ISO 14001.
■
These operating instructions contain important information on handling the instrument.Working safely requires
that all safety instructions and work instructions are observed.
■
Observe the relevant local accident prevention regulations and general safety regulations for the instrument's
range of use.
■
The operating instructions are part of the product and must be kept in the immediate vicinity of the instrument and
readily accessible to skilled personnel at any time.
■
Skilled personnel must have carefully read and understood the operating instructions prior to beginning any work.
■
The manufacturer's liability is void in the case of any damage caused by using the product contrary to its intended
use, non-compliance with these operating instructions, assignment of insuciently qualied skilled personnel or
unauthorised modications to the instrument.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modications.
■
Further information:
- Internet address: www.wika.com / www.wika.de
- Relevant data sheet: PE 81.65
- Application consultant: Tel.: +49 9372/132-0
Fax: +49 9372/132-406
E-Mail: [email protected]
5WIKA operating instructions pressure sensor, model O-10
EN
11613017.05 09/2019 EN/DE/FR/ES
1. General information
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in serious injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries or damage to the equipment or
the environment, if not avoided.
Information
... points out useful tips, recommendations and information for ecient and trouble-free operation.
Abbreviations
2-wire Two connection lines are used for the power supply.
The measurement signal also provides the supply current.
3-wire Two connection lines are used for the power supply.
One connection line is used for the measurement signal.
UBPositive power supply terminal
0V Reference potential
S+Positive output terminal
6WIKA operating instructions pressure sensor, model O-10
EN
11613017.05 09/2019 EN/DE/FR/ES
2. Safety
2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the appropriate pressure sensor has been
selected in terms of measuring range, design and specic measuring conditions.
Non-observance can result in serious injury and/or damage to the equipment.
WARNING!
■
Open the connections only after the system has been depressurised.
■
Observe the working conditions in accordance with chapter 3 "Specications".
■
Always operate the pressure sensor within the overpressure safety range.
Further important safety instructions can be found in the individual chapters of these operating
instructions.
2.1 Intended use
The pressure sensor is used to convert pressure into an electrical signal.
Model O-10 (T): Standard version
Model O-10 (5):
With 5-fold overpressure limit and condensation-tight case.
For applications with water as a medium a 5-fold overpressure safety for protection against water
hammer eects and a condensation-tight case is recommended.
The instrument has been designed and built solely for the intended use described here, and may only be used
accordingly.
The technical specications contained in these operating instructions must be observed. Improper handling or
operation of the instrument outside of its technical specications requires the instrument to be taken out of service
immediately and inspected by an authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on operation contrary to the intended use.
7WIKA operating instructions pressure sensor, model O-10
EN
11613017.05 09/2019 EN/DE/FR/ES
2. Safety
2.2 Personnel qualication
WARNING!
Risk of injury should qualication be insucient!
Improper handling can result in considerable injury and damage to equipment.
The activities described in these operating instructions may only be carried out by skilled personnel who
have the qualications described below.
Skilled personnel
Skilled personnel are understood to be personnel who, based on their technical training, knowledge of measurement
and control technology and on their experience and knowledge of country-specic regulations, current standards and
directives, are capable of carrying out the work described and independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive media.
2.3 Special hazards
WARNING!
For hazardous media such as oxygen, acetylene, ammable or toxic gases or liquids, and refrigeration
plants, compressors, etc., in addition to all standard regulations, the appropriate existing codes or
regulations must also be followed.
WARNING!
Residual media in dismounted pressure sensors can result in a risk to persons, the environment and
equipment.
Take sucient precautionary measures.
8WIKA operating instructions pressure sensor, model O-10
EN
11613017.05 09/2019 EN/DE/FR/ES
2. Safety
If the serial number becomes illegible due to mechanical damage or overpainting, traceability will no longer be possi-
ble.
Explanation of symbols
General danger symbol
Voltage DC
2.4 Labelling / safety marks
Product label
Output signal Pin assignmentPower supply
P# Product no.
S# Serial no. Measuring range
9WIKA operating instructions pressure sensor, model O-10
EN
11613017.05 09/2019 EN/DE/FR/ES
2. Safety / 3. Specications
3. Specications
3.1 Measuring ranges model O-10 (T)
Relative pressure
bar 0 ... 6 1) 2) 0 ... 10 1) 2) 0 ... 16 0 ... 25 0 ... 40 0 ... 60 0 ... 100
0 ... 160 0 ... 250 0 ... 400 0 ... 600
psi 0 ... 100 1) 2) 0 ... 160 0 ... 200 0 ... 250 0 ... 300 0 ... 400 0 ... 500
0 ... 600 0 ... 750 0 ... 800 0 ... 1,000 0 ... 1,500 0 ... 2,000 0 ... 3,000
0 ... 4,000 0 ... 5,000 0 ... 6,000 0 ... 7,500 0 ... 8,000
Vacuum and +/- measuring range
bar -1 ... +5 2) -1 ... +9 2) -1 ... +15 -1 ... +24 -1 ... +39 -1 ... +59
psi -30 inHg ... +100 2) -30 inHg ... +160 -30 inHg ... +200 -30 inHg ... +300 -30 inHg ... +500
1) Measuring deviation of the zero signal ≤ ±0.7 % of span
2) Non-linearity ≤ ±0.6 % of span BFSL
The given measuring ranges are also available in kg/cm2, kPa and MPa.
10 WIKA operating instructions pressure sensor, model O-10
EN
11613017.05 09/2019 EN/DE/FR/ES
3. Specications
Overpressure limit
2 times
3 times on request
Vacuum tightness
Yes
3.2 Measuring ranges model O-10 (5)
Relative pressure
bar 0 ... 6 0 ... 10 0 ... 16 0 ... 25 0 ... 40
Overpressure limit
5 times
Vacuum tightness
Yes
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Sprachen:
Andere WIKA Zubehör Handbücher
WIKA
WIKA RMG Bedienungsanleitung
WIKA
WIKA MG-1 Bedienungsanleitung
WIKA
WIKA A2G-80 Bedienungsanleitung
WIKA
WIKA MH-4-CAN Bedienerhandbuch
WIKA
WIKA CPT7000-IS Bedienungsanleitung
WIKA
WIKA CPT62I0 Bedienungsanleitung
WIKA
WIKA MH-3 Bedienungsanleitung
WIKA
WIKA LF-1 Bedienungsanleitung
WIKA
WIKA P-30 Bedienungsanleitung
WIKA
WIKA FLR Series Bedienungsanleitung
WIKA
WIKA MHC-1 Bedienungsanleitung
WIKA
WIKA PG43SA-D Bedienungsanleitung
WIKA
WIKA GD-20 Series Bedienungsanleitung
WIKA
WIKA HP-2 Bedienungsanleitung
WIKA
WIKA air2guide A2G-85 Bedienungsanleitung
WIKA
WIKA CPT7000 Bedienungsanleitung
WIKA
WIKA MH-4 Bedienungsanleitung
WIKA
WIKA RLT-1000 Bedienungsanleitung
WIKA
WIKA SENSeOR AMS01 Bedienungsanleitung
WIKA
WIKA MH-4-CAN Bedienungsanleitung
