WIKA DG-10 Bedienungsanleitung
Operating instructions
Betriebsanleitung
Mode d'emploi
Manual de instrucciones
GB
D
F
E
Digitalmanometer Typ DG-10
Digital pressure gauge model DG-10
Digital pressure gauge model DG-10
Manomètre digital type DG-10
Manómetro digitales modelo DG-10
2 WIKA operating instructions digital gauge, model DG-10
GB
D
11250313.03 09/2012 GB/D/F/E
F
E
Operating instructions model DG-10 Page 3 - 28
Betriebsanleitung Typ DG-10 Seite 29 - 56
Mode d‘emploi type DG-10 Page 57 - 82
Manual de instrucciones modelo DG-10 Página 83 - 109
© 2012 WIKA Alexander Wiegand SE & Co. KG
All rights reserved. / Alle Rechte vorbehalten.
WIKA® is a registered trademark in various countries.
WIKA® ist eine geschützte Marke in verschiedenen Ländern.
Prior to starting any work, read the operating instructions!
Keep for later use!
Vor Beginn aller Arbeiten Betriebsanleitung lesen!
Zum späteren Gebrauch aufbewahren!
Lire le mode d'emploi avant de commencer toute opération !
A conserver pour une utilisation ultérieure !
¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!
¡Guardar el manual para una eventual consulta posterior!
3WIKA operating instructions digital pressure gauge, model DG-10
11250313.03 09/2012 GB/D/F/E
GB
Contents
Contents
Declarations of conformity can be found online at www.wika.com.
1. General information 4
2. Safety 6
3. Specications 9
4. Design and function 13
5. Transport, packaging and storage 13
6. Commissioning, operation 14
7. Maintenance and cleaning 25
8. Faults 26
9. Dismounting, return and disposal 27
10. Accessories 28
Appendix 1: EC Declaration of conformity model DG-10 55
4 WIKA operating instructions digital pressure gauge, model DG-10
11250313.03 09/2012 GB/D/F/E
GB
1. General information
1. General information
■
The digital pressure gauge described in the operating instructions has been designed and
manufactured using state-of-the-art technology. All components are subject to stringent quality and
environmental criteria during production. Our management systems are certied to ISO 9001 and
ISO 14001.
■
These operating instructions contain important information on handling the instrument. Working
safely requires that all safety instructions and work instructions are observed.
■
Observe the relevant local accident prevention regulations and general safety regulations for the
instrument's range of use.
■
The operating instructions are part of the product and must be kept in the immediate vicinity of the
instrument and readily accessible to skilled personnel at any time.
■
Skilled personnel must have carefully read and understood the operating instructions prior to
beginning any work.
■
The manufacturer's liability is void in the case of any damage caused by using the product contrary
to its intended use, non-compliance with these operating instructions, assignment of insuciently
qualied skilled personnel or unauthorised modications to the instrument.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modications.
■
Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: PE 81.66
- Application consultant: Tel.: (+49) 9372/132-8976
Fax: (+49) 9372/132-8008976
E-mail: [email protected]
5WIKA operating instructions digital pressure gauge, model DG-10
11250313.03 09/2012 GB/D/F/E
GB
1. General information
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in serious injury or death, if not
avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries or damage to
the equipment or the environment, if not avoided.
Information
... points out useful tips, recommendations and information for ecient and trouble-free
operation.
6 WIKA operating instructions digital pressure gauge, model DG-10
11250313.03 09/2012 GB/D/F/E
GB
2. Safety
2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the appropriate digital
pressure gauge has been selected in terms of measuring range, design and specic
measuring conditions.
Non-observance can result in serious injury and/or damage to the equipment.
WARNING!
■
Open the connections only after the system has been depressurised.
■
Observe the working conditions in accordance with chapter 3 "Specications".
■
Always operate the digital pressure gauge within the overpressure limit.
Further important safety instructions can be found in the individual chapters of these
operating instructions.
2.1 Intended use
The digital pressure gauge acts as the display for the applied pressure. The pressure value is displayed
via a digital indicator.
The instrument has been designed and built solely for the intended use described here, and may only
be used accordingly.
The technical specications contained in these operating instructions must be observed. Improper
handling or operation of the digital pressure gauge outside of its technical specications requires the
digital pressure gauge to be taken out of service immediately and inspected by an authorised WIKA
service engineer.
The manufacturer shall not be liable for claims of any type based on operation contrary to the intended
use.
7WIKA operating instructions digital pressure gauge, model DG-10
11250313.03 09/2012 GB/D/F/E
GB
2. Safety
2.2 Personnel qualication
WARNING!
Risk of injury should qualication be insucient!
Improper handling can result in considerable injury and damage to equipment.
The activities described in these operating instructions may only be carried out by skilled
personnel who have the qualications described below.
Skilled personnel
Skilled personnel are understood to be personnel who, based on their technical training, knowledge
of measurement and control technology and on their experience and knowledge of country-specic
regulations, current standards and directives, are capable of carrying out the work described and
independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive media.
2.3 Special hazards
WARNING!
For hazardous media such as oxygen, acetylene, ammable or toxic gases or liquids,
and refrigeration plants, compressors, etc., in addition to all standard regulations, the
appropriate existing codes or regulations must also be followed.
WARNING!
Residual media in dismounted digital pressure gauges can result in a risk to persons, the
environment and equipment.
Take sucient precautionary measures.
8 WIKA operating instructions digital pressure gauge, model DG-10
11250313.03 09/2012 GB/D/F/E
GB
2. Safety
2.4 Labelling / safety marks
Product label
If the serial number becomes illegible due to mechanical damage or overpainting, traceability will no
longer be possible.
Explanation of symbols
Before mounting and commissioning the instrument, ensure you read the operating
instructions!
CE, Communauté Européenne
Instruments bearing this mark comply with the relevant European directives.
Measuring range
Power supply P# Product no.
S# Serial no.
9WIKA operating instructions digital pressure gauge, model DG-10
11250313.03 09/2012 GB/D/F/E
GB
3. Specications
3. Specications
3.1 Measuring ranges
Relative pressure
bar Measuring range 0 ... 2 0 ... 5 0 ... 10 0 ... 20 0 ... 50 0 ... 100
Overpressure limit 5 10 20 40 100 200
Burst pressure 6 12 25 50 120 800
Measuring range 0 ... 160 0 ... 250 0 ... 400 0 ... 600
Overpressure limit 320 500 800 1,200
Burst pressure 1,000 1,200 1,700 2,400
psi Measuring range 0 ... 30 0 ... 60 0 ... 145 0 ... 300 0 ... 600 0 ... 1,450
Overpressure limit 70 145 290 580 1,450 2,900
Burst pressure 85 170 360 725 1,740 11,600
Measuring range 0 ... 2,000 0 ... 3,000 0 ... 5,000 0 ... 7,500 0 ... 10,000 1)
Overpressure limit 4,640 7,250 11,600 17,400 21,750
Burst pressure 14,500 17,400 24,650 34,800 43,500
1) only possible with DG-10-E (DG-10-S can only display up to 9999 psi)
Vacuum and +/- measuring ranges
bar Measuring range -1 ... +2 -1 ... +5 -1 ... +10
Overpressure limit 5 10 20
Burst pressure 6 12 25
psi Measuring range -30 inHg ... +29 psi -30 inHg ... +72 psi -30 inHg ... +145 psi
Overpressure limit 70 145 290
Burst pressure 85 170 360
10 WIKA operating instructions digital pressure gauge, model DG-10
11250313.03 09/2012 GB/D/F/E
GB
3. Specications
3.2 Digital indicator
See chapter 6.3 "Description of the digital indicator"
3.3 Software functions
See chapter 6.4 "Keys and functions"
3.4 Approvals, directives and certicates
CE conformity
■
Pressure equipment directive 97/23/EC, PS > 200 bar; module A, pressure accessory
■
EMC directive 2004/108/EC, EN 61326 emission (group 1, class B) and immunity (industrial applica-
tion)
3.5 Voltage supply
see chapter 6.2 "Voltage supply"
3.6 Reference conditions
Temperature
0 ... 60 °C
Atmospheric pressure
860 ... 1,060 mbar
Humidity
< 90 % rel., non-condensing
Nominal position
Calibrated in vertical mounting position with pressure connection facing downwards.
Power supply
2 x 1.5 V AA cell
Andere Handbücher für DG-10
1
Inhaltsverzeichnis
Sprachen:
Andere WIKA Messgerät Handbücher
WIKA
WIKA 232.50.100 Bedienungsanleitung
WIKA
WIKA mensor 9250 Bedienungsanleitung
WIKA
WIKA SENSeOR HTR02 Bedienungsanleitung
WIKA
WIKA PG23HP Series Bedienungsanleitung
WIKA
WIKA GDM-63 Bedienungsanleitung
WIKA
WIKA TR12 Series Betriebsanleitung
WIKA
WIKA PG81 Bedienungsanleitung
WIKA
WIKA PGW23.100.11 Bedienungsanleitung
WIKA
WIKA TC84 Bedienungsanleitung
WIKA
WIKA DIH50 Bedienungsanleitung
WIKA
WIKA DI30 Bedienungsanleitung
WIKA
WIKA A2G-10 Bedienungsanleitung
WIKA
WIKA SERIES CPG 2500 Bedienungsanleitung
WIKA
WIKA DPT-10 Bedienungsanleitung
WIKA
WIKA 73 02.100 Series Bedienungsanleitung
WIKA
WIKA 2XX.34 Produkthandbuch
WIKA
WIKA FLC-608 Bedienungsanleitung
WIKA
WIKA mensor CPG2400 Bedienungsanleitung
WIKA
WIKA 700.01 Bedienungsanleitung
WIKA
WIKA PG23CP Bedienungsanleitung
