Windsor Titan T708 Bedienungsanleitung

Read these instructions before using the machine.

86369590-B

12/11/12

Operating instructions (ENG)

MODELS:

T708

10130060

T708IE

10130070

T716

10130080

T716IE

10130090

T720TP

10130100

Wet / Dry Vacuums

IPX4

286369590 Titan Vacuum

Machine Data Label

Overview

This machine is a commercial vacuum designed for wet and dry pick-up.

Warranty Registration

Thank you for purchasing a Windsor product. Warranty registration is quick and easy.

Your registration will allow us to serve you better over the lifetime of the product.

To register your product go to :

www.windsorind.com/WarrantyRegistration.aspx

For customer assistance:

1-800-444-7654

Table of Contents

Machine Data Label . . . . . . . . . . . . . . . . . . . . . . . . . .2

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .3

How To Use This Manual . . . . . . . . . . . . . . . . . . . . .4

Safety

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . .5

Grounding Instructions:. . . . . . . . . . . . . . . . . . . . . . .7

Operations

Vacuum And Accessories Components . . . . . . . . . .8

Maintenance

Periodic Maintenance . . . . . . . . . . . . . . . . . . . . . . .10

Servicing the Filter . . . . . . . . . . . . . . . . . . . . . . . . . 10

Servicing the Vac Motor . . . . . . . . . . . . . . . . . . . . .10

Servicing The Vac Motor. . . . . . . . . . . . . . . . . . . . .11

Parts

Vacuum Motor Assembly - T708 / T708IE . . . . . . 14

Vacuum Motor Assembly - T716 / T720TP. . . . . . 16

Filter Group T708 . . . . . . . . . . . . . . . . . . . . . . . . . 18

Filter T716 / T720TP . . . . . . . . . . . . . . . . . . . . . . . 20

Tank T708. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Tank T716. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Tank and Cart - T720TP . . . . . . . . . . . . . . . . . . . . 26

Front Mounted Squeegee - TSQ16. . . . . . . . . . . . 28

Front Mounted Squeegee - TSQ20. . . . . . . . . . . . 30

Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Suggested Spare Parts. . . . . . . . . . . . . . . . . . . . . 33

86369590 Titan Vacuum

How To Use This Manual

This manual contains the following sections:

• How to Use This Manual

•Safety

• Operations

• Maintenance

•PartsList

The HOW TO USE THIS MANUAL section will tell you

how to find important information for ordering correct

repair parts.

Parts may be ordered from authorized dealers. When

placing an order for parts, the machine model and

machine serial number are important. Refer to the

MACHINE DATA box which is filled out during the

installation of your machine. The MACHINE DATA box

is located on the inside of the front cover of this manual.

The model and serial number of your machine is

located on the back of the motor head under the power

cord.

The SAFETY section contains important information

regarding hazardous or unsafe practices of the

machine. Levels of hazards are identified that could

result in product damage, personal injury, or severe

injury resulting in death.

The OPERATIONS section is to familiarize the operator

with the operation and function of the machine.

The MAINTENANCE section contains preventive main-

tenance to keep the machine and its components in

good working condition.

The PARTS LIST section contains assembled parts

illustrations and corresponding parts list. The parts lists

include a number of columns of information:

•REF – column refers to the reference number

on the parts illustration.

•PART NO. – column lists the part number for

the part.

•ALT NO. – reference number.

•QTY – column lists the quantity of the part used

in that area of the machine.

•DESCRIPTION – column is a brief description

of the part.

•SERIAL NO. FROM – If this column has an (*)

and a Reference number, see the SERIAL

NUMBERS page in the back of your manual. If

column has two asterisk (**), call manufacturer

for serial number. The serial number indicates

the first machine the part number is applicable

to. The main illustration shows the most current

design of the machine. When a boxed illustra-

tion is shown, it displays the older design.

•NOTES – column for information not noted by

the other columns.

NOTE: If a service or option kit is installed on your

machine, be sure to keep the KIT INSTRUCTIONS

which came with the kit. It contains replacement parts

numbers needed for ordering future parts.

NOTE: The manual part number is located on the

lower left corner of the front cover.

Model:

Date of Purchase:

Serial Number:

Dealer:

Address:

Phone Number:

Sales Representative:

86369590 Titan Vacuum

Safety

IMPORTANT SAFETY INSTRUCTIONS

When using this machine, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

Failure to read and observe all DANGER statements could result in severe bodily injury

or death. Read and observe all DANGER statements found in your Owner’s Manual

and on your machine.

Failure to read and observe all WARNING statements could result in injury to you or to

other personnel; property damage could occur as well. Read and observe all

WARNING statements found in your Owner’s Manual and on your machine.

Failure to read and observe all CAUTION statements could result in damage to the

machine or to other property. Read and observe all CAUTION statements found in your

Owner’s Manual and on your machine.

Read the Owner’s Manual prior to operating or attempting any service or maintenance procedure to your machine.

You must have training in the operation of this machine before using it. If the operator(s) cannot read English, have

this manual explained fully before attempting to operate this machine.

Do not operate this machine until it is completely assembled. Inspect the machine carefully before operation. Use

only as described in this manual. Use only the manufacturer’s recommended attachments.

Do not use this machine with or near fuels, grain dust, solvents, thinners, or other flammable materials.

Do not pick up flammable fluids, dust or vapors.

Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

This machine is not suitable for picking up health endangering dust.

Do not use the machine if the power cord is damaged. Do not use the electrical cord to move the machine. Keep

cord away from heated surfaces. Do not unplug by pulling on the cord; grasp the plug, not the cord. Turn off all

controls before unplugging. Do not close a door on cord or pull around sharp edges or corners.

Disconnect the power supply before attempting any maintenance or service.

Read all machine labels before attempting to operate the machine. Make sure all of the labels are attached or

fastened to the machine. Get replacement labels and decals from the manufacturer’s distributor.

Keep the electrical components of the machine dry. Always store the machine in a dry area.

Do not use this machine as a step or furniture. Do not allow to be used as a toy. Close attention is necessary when

used by or near children.

Keep hands, feet, loose clothing, hair, fingers, and all parts of the body away from openings and moving parts.

86369590 Titan Vacuum

Safety

Do not handle plug or appliance with wet hands.

Always install float before any wet pick-up operation.

Before opening cover, switch off machine. Wait until the fan stops completely or dust and debris may be ejected.

If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return it to

an Authorized service center.

Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything

that may reduce air flow.

Do not use the machine without the dust bag and/or filters in place.

Use extra caution when cleaning on stairs.

Always use a 3-wire electrical system connected to the electrical ground. Whenever possible connect the machine

to an outlet protected by a ground fault interrupter (GFCI). See “Grounding Instructions.”

READ AND SAVE THESE INSTRUCTIONS

86369590 Titan Vacuum

Safety

Grounding Instructions:

This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resis-

tance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an

equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is

properly installed and grounded in accordance with all local codes and ordinances.

Improper connection of the equipmentgrounding conductor can result in a risk of electric shock. Check with a

qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not

modify the plug provided with the appliance - if it will not fit the outlet , have a proper outlet installed by a qualified

electrician.

This Product Is For Commercial Use Only.

Electrical:

The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below

those indicated on the data label will cause serious damage to the motors.

Extension Cords:

If an extension cord is used, the wire size must be at least one size larger than the power cord on the machine, and

must be limited to 50 feet (15.5m) in length.

86369590 Titan Vacuum

Operations

Vacuum And Accessories Components

A. Motor Block

B. On/Off Switch

C. Float: Keeps liquid out of Motor Block

D. Polyester Filter: Remove for use with liquids

E. Hooks: Secure Motor Block to Tank

F. Suction Inlet

G. Tank

H. 2-pc. Chrome Wand

I. 10-ft. x 1-1/2" Flexible Hose

J. 2-pc PVC Wand

K. 3" Round Brush

L. Crevice Tool

M. 16" Brush

N. 16" Squeegee

O. Fixed Carpet Tool

NOTE: The Polyester Filter must be cleaned after

each use to maintain efficient suction.

Important Instructions

• Before use, the equipment must be correctly

assembled with all its components.

• Check that electrical outlet is correct for use

with the plug on the machine.

• Before connecting, check that the specified

motor voltage corresponds to the main voltage

available.

• Never use the equipment near inflammable,

explosive or toxic substances: sparks from the

motor could cause dangerous reactions.

• Always unplug the machine from electrical

outlet when leaving machine unattended or

before attempting any repair.

• Service and repair should be done by qualified

personnel only.

• Use only original manufacturer’s replacement

parts.

86369590 Titan Vacuum

Operations

This machine is a commercial vacuum designed for wet

and dry pick-up.

Dry soil can be vacuumed directly into the tank. To

empty the tank of dry soil, remove the top and dump

into trash receptacle.

For wet pick-up, remove polyester filter. The machine is

equipped with a float shut-off. As the tank is filled to

capacity, a float rises and seals the vac intake, causing

loss of vacuum. Switch off the vacuum when this

happens and bring the machine to a floor drain.

Use the convenient drain hose at the back of the

vacuum to empty the tank.

With both wet and dry applications be sure to frequently

clean the filter. This is especially true when the vacuum

is being used with strippers and wax.

Strippers and some detergents produce foam which will

damage the vac motors. The vac shut-off may not be

sensitive to all foams. Be sure to check that the tank is

not filling with foam. Use a defoaming agent to avoid

pulling foam through vac motor. Should vac motor

become wet, remove source of overflow and immedi-

ately run vac motor open to dry.

At the end of each working day:

1. After each use, rinse tank with fresh water. Periodi-

cally inspect the recovery tank and decontaminate

if necessary, using a Hospital Grade Virucide or a

1:10 bleach to water solution. Waste water should

be disposed of properly.

2. Remove head assembly and allow tank to dry.

3. Remove filters for cleaning or to allow to dry.

4. Inspect hoses for wear. Frayed or cracked hoses

should be replaced to avoid vacuum loss.

5. Inspect power cord for wear. This cable will lay on

wet surfaces. To prevent electrical shock replace

cords with frayed or cracked insulation immedi-

ately.

86369590 Titan Vacuum

Maintenance

Periodic Maintenance

(Every six to twelve months):

1. Check filter for wear, replace dirt saturated filters that do

not respond to normal cleaning.

2. Inspect gasket seals and replace those which have

begun to leak.

3. Examine carbon motor brushes and commutator.

Servicing the Filter

The filter is accessed by lifting the head assembly off the tank.

Polyester filter is easily removed by simply lifting the filter basket out of the tank.

Cartridge filters – Remove the filter retainer by turning the black knob 90 degrees counter-clockwise.

Cartridge filter will then slide off of float assembly.

NOTE: Be sure to frequently clean the filter. Allow filter to dry after being used for wet pick-up. Filters used for wet

pick-up including stripper must be thoroughly cleaned before being allowed to dry. Worn filters can affect vacuum

performance. Replace the filter when it becomes worn out and normal cleaning will not restore vac performance.

Servicing the Vac Motor

Motor Replacement

1. Disconnect power cord from power source.

2. To access the vac motor, remove the screws that attach the main cover to the head assembly and set the cover

to one side.

3. Disconnect the motor ’s 2 red lead wires from the main switch.

4. Disconnect green/yellow wire by removing screw from motor core.

5. Remove the four motor mounting screws.

6. Remove motor plate and set aside.

7. Take out the motor and remove the upper and lower gaskets.

8. Inspect gaskets. If they shown any wear or tear in the material, replace.

9. Install gaskets onto new motor. Make sure gaskets are properly seated.

10. Install the new motor. Make sure foam mufflers are positioned properly.

11. Attach motor plate to motor.

12. Connect green/yellow wire to motor core.

13. Connect motor ’s 2 red lead wires to main switch.

14. Re-assemble vac cover.

15. Test for proper operation.

86369590 Titan Vacuum

Replace both carbon brushes when either is less

than 3/8" long.

(P/N 8.616-352.0) 120V, (P/N 8.616-353.0) 230V

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Windsor Staubsauger Handbücher

Windsor

Windsor SRXP12 10120240 Bedienungsanleitung

Windsor

Windsor Flexamatic FM12 10120030 Bedienungsanleitung

Windsor

Windsor Versamatic Plus VSP18 Bedienungsanleitung

Windsor

Windsor Sensor SR 15 Bedienungsanleitung

Windsor

Windsor Recover 7 Bedienungsanleitung

Windsor

Windsor Voyager DUO Basic Bedienungsanleitung

Windsor

Windsor RECOVER 18 Bedienungsanleitung

Windsor

Windsor VersamaticVS14 Bedienungsanleitung

Windsor

Windsor Chariot 3 - CV 86/1 RS Bp Bedienungsanleitung

Windsor

Windsor Sensor XP 18 Bedienungsanleitung

Windsor

Windsor VP6 Bedienungsanleitung

Windsor

Windsor NuWave Bedienungsanleitung

Windsor

Windsor VersamaticPlus 14 Bedienungsanleitung

Windsor

Windsor Sensor SRXP18 Bedienungsanleitung

Windsor

Windsor NW Bedienungsanleitung

Windsor

Windsor Sensation SX2 Bedienungsanleitung

Windsor

Windsor Voyager DUO Basic Bedienungsanleitung

Windsor

Windsor SENSOR SR18 Bedienungsanleitung

Windsor

Windsor Versamatic Plus 14 Bedienungsanleitung

Windsor

Windsor Sensor S15 Bedienungsanleitung

Windsor

Windsor Trek Vac 2 Bedienungsanleitung

Windsor

Windsor 10120270 Bedienungsanleitung

Windsor

Windsor Versamatic Plus VSP14I Bedienungsanleitung

Windsor

Windsor Sensor S15 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung