Winmate G-WIN Bedienungsanleitung

Please read this instructions before operating the device and retain them for future reference.

G-WIN Vehicle Mount

Panel PC

Intel®Core™i5-7200U 2.5GHz (turbo to 3.1GHz)

Model No.:

R10IK3S-VMT2

R15IK3S-VMC3(HB)

Quick Start Guide

Version 1.0

Document Part Number: 9152111I102S

G-WIN Vehicle Mount Panel PC Quick Start Guide

Contents

Preface 3

Chapter 1: Introduction 6

1.1 Features 6

1.2 Package Contents 6

1.3 Mechanical Concept 7

1.4 Description of Parts 8

1.4.1 Connector Placement 8

1.4.2 Physical Buttons and LED Indicators 9

Chapter 2: Getting Started 12

2.1 Turning On and Off Your Device 12

2.2 How to Enable Watchdog 14

Chapter 3: Installation 15

3.1 Connecting to Other Devices 15

3.1.1 Power Input Connector 15

3.1.2 Ethernet (LAN) Connector 15

3.1.3 Serial Interface (RS-232) Connector 15

3.1.4 Serial Interface (RS-232/422/485) Connector 16

3.1.5 USB 2.0 and USB 3.0 Connector 16

3.1.6 HDMI Connector 16

3.1.7 Digital Input/ Output Connector (Optional) 17

3.2 Mounting 18

3.2.1 VESA Mounting 18

3.2.2 Yoke Mounting 19

3.2.3 Roof Mounting 21

Appendix - 23 -

Appendix A: Cleaning the Monitor - 23 -

Appendix B: Winmate Software Development Kit - 23 -

Preface

FCC Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at him own expense.

European Union

Electromagnetic Compatibility Directive (2014/30/EU)

EN55024: 2010/ A1: 2015

oIEC61000-4-2: 2009

oIEC61000-4-3: 2006+A1: 2007+A2: 2010

oIEC61000-4-4: 2012

oIEC61000-4-5: 2014

oIEC61000-4-6: 2014

oIEC61000-4-8: 2010

oIEC61000-4-11: 2004

EN55032: 2012/AC:2013

EN61000-3-2:2014

EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

This equipment is in conformity with the requirement of the following EU legislations and harmonized

standards. Product also complies with the Council directions.

G-WIN Vehicle Mount Panel PC Quick Start Guide

No part of this document may be reproduced, copied, translated, or transmitted in any form or by any

means, electronic or mechanical, for any purpose, without the prior written permission of the original

manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer

Winmate Inc. reserve the right to make changes, without notice, to any product, including circuits and/or

software described or contained in this manual in order to improve design and/or performance. We assume

no responsibility or liability for the use of the described product(s) conveys no license or title under any

patent, copyright, or masks work rights to these products, and make no representations or warranties that

these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.

Applications that are described in this manual are for illustration purposes only. We make no representation

or guarantee that such application will be suitable for the specified use without further testing or

modification.

Warranty

Winmate Inc. warranty guarantees that each of its products will be free from material and workmanship

defects for a period of one year from the invoice date. If the customer discovers a defect, we will, at his/her

option, repair or replace the defective product at no charge to the customer, provide it is returned during the

warranty period of one year, with transportation charges prepaid. The returned product must be properly

packaged in its original packaging to obtain warranty service. If the serial number and the product shipping

data differ by over 30 days, the in-warranty service will be made according to the shipping date. In the serial

numbers the third and fourth two digits give the year of manufacture, and the fifth digit means the month.

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of our distributor

to find the update information about the product. Second, contact with your distributor, sales representative,

or our customer service center for technical support if you need additional assistance.

You may need the following information ready before you call:

Product serial number

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers every business day.

Preface

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to alert you

to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and

Warnings. The following is an example of each type of advisory.

Note:

A note is used to emphasize helpful information

Important:

An important note indicates information that is important for you to know.

Caution/ Attention

A Caution alert indicates potential damage to hardware and explains how to avoid the

potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et explique comment

éviter le problème potentiel.

Warning!/ Avertissement!

An Electrical Shock Warning indicates the potential harm from electrical hazards and how

to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des emplacements

électriques et comment éviter ces problèmes.

Safety Information

Warning!/ Avertissement

Always completely disconnect the power cord from your chassis whenever you work

with the hardware. Do not make connections while the power is on. Sensitive

electronic components can be damaged by sudden power surges. Only experienced

electronics personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous travaillez sur

celui-ci. Ne pas brancher de connections lorsque l’alimentation est présente. Des

composantes électroniques sensibles peuvent être endommagées par des sauts

d’alimentation. Seulement du personnel expérimenté devrait ouvrir ces chassis.

Caution/ Attention

Always ground yourself to remove any static charge before touching the CPU card.

Modern electronic devices are very sensitive to static electric charges. As a safety

precaution, use a grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique avant de

toucher la carte CPU. Les équipements électroniques moderns sont très sensibles

aux décharges d’électricité statique. Toujours utiliser un bracelet de mise à la terre

comme précaution. Placer toutes les composantes électroniques sur une surface

conçue pour dissiper les charge, ou dans un sac anti-statique lorsqu’elles ne sont

pas dans le chassis.

Alternating Current Mise à le terre !

The Protective Conductor Terminal (Earth Ground) symbol indicates the potential risk of

serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique grave à la

terre incorrecte.

G-WIN Vehicle Mount Panel PC Quick Start Guide

Chapter 1: Introduction

Congratulations on purchasing Winmate® G-WIN Vehicle Mount Panel PC. Winmate® G-WIN Vehicle

Mount Panel PC comes with fanless, low power but high performance platform design, sunlight readable

panel, WLAN integration, great ability for anti-shock & vibration, IP65 protection and anti-corrosion coating

with aluminum alloy housing.

Both of great mobility and robust design are fitting the demands for every harsh environment applications

such as logistics, transportation/ fleet management, heavy vehicles, utility and also outdoor usage.

1.1 Features

Winmate® G-WIN Vehicle Mount Panel PC features:

IP65-proof enclosures (except I/O parts)

Fanless, streamlined enclosure for highly efficient heat dissipation

Compliance with MIL-STD 810 & IEC 60068-2-27 for shock and vibration test

Aluminum housing with anti-corrosion

5 Wire resistive touch/ Anti-reflective protection glass

Optional GPS, 4G/ WLAN (Either one)

Wide range 9-36V DC input

Mounting options suitable for vehicle mounting: VESA Mount, Yoke Mount and Roof Mount

Compliance with EN50155

1.2 Package Contents

Carefully remove the box and unpack your device. Please check if all the items listed below are inside your

package. If any of these items are missing or damaged contact us immediately.

Standard accessories:

3 Pin Terminal Block

Cable:94EL02X020E0

Connector:604520105004

Quick Start

Guide

(Hardcopy)

9152111I102S

Driver CD &

User Manual

9171111K102L

Touch Driver

9171111T100D

Optional Accessories:

AC Adapter

50W:90PO12050000

80W:90PO12800000

Power Cord

Varies by

destination

WLAN Antenna

391000020202

Mounting Bracket

10.4”99KK00Z00010

15” 99KK15A00001

Chapter 1: Introduction

1.3 Mechanical Concept

On the picture below you can see spare parts exploded drawing of a standard G-WIN Vehicle Mount Panel

PC.

G-WIN Vehicle Mount Panel PC Quick Start Guide

1.4 Description of Parts

1.4.1 Connector Placement

G-WIN Panel PC 10.4”

№

Description

№

Description

①

9-36V DC Terminal Block

⑤

2 x USB3.0

②

CAN Bus or Digital I/O (Optional)

⑥

HDMI1.4a

③

RS-232

⑦

2 x RJ45

④

RS232/422/485

G-WIN Panel PC 15”

№

Description

№

Description

①

9-36V DC Terminal Block

⑥

RS-232/ 422/485

②

RS-232 (Optional)

⑦

2 x USB3.0

③

RS-232

⑧

HDMI 1.4a

④

SIM Card Slot (Optional)

⑨

2 x RJ45

⑤

CANBus/ GPIO (Optional)

Chapter 1: Introduction

1.4.2 Physical Buttons and LED Indicators

Physical buttons and LED indicators located on the rear side of the Panel PC.

G-WIN Panel PC 10.4”

Physical Buttons

Icon

Button

Function

Power

Turn ON or turn OFF the Panel PC.

Brightness UP

Increase the brightness of the display screen, or allows user to

navigate items of a single OSD menu.

Brightness DOWN

Decrease the brightness of the display screen, or allows user to

navigate items of a single OSD menu.

Reset

Clear any pending errors or events and brings a system to normal

condition or an initial state.

G-WIN Vehicle Mount Panel PC Quick Start Guide

LED Indicators

Indicator

Color

Definition

PWR

Green

Power is ON and the device functions normally

Orange

Panel PC is suspended

HDD

Green

HDD is active

OFF

HDD is inactive

G-WIN Panel PC 15”

Andere Handbücher für G-WIN

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Winmate Touchscreen Handbücher

Winmate

Winmate W10IB3S-MRH2 Bedienungsanleitung

Winmate

Winmate R19IHAT-66EX Bedienungsanleitung

Winmate

Winmate R15IB3S-65C3 Bedienungsanleitung

Winmate

Winmate W05TA3S-PCT3AC Bedienungsanleitung

Winmate

Winmate R15IB3S-65A1FTP Bedienungsanleitung

Winmate

Winmate GC Series Bedienungsanleitung

Winmate

Winmate R15IB3S-SPC369 Bedienungsanleitung

Winmate

Winmate W10FA3S-GCH1 Bedienungsanleitung

Winmate

Winmate G-WIN Slim IP65 Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Winmate

Winmate W07RK3S-PCO1-POE Bedienungsanleitung

Winmate

Winmate W10IB3S-PCH2-PoE S-Series Bedienungsanleitung

Winmate

Winmate R17IK3S-65M1 Bedienungsanleitung

Winmate

Winmate R10IB3S-67T2 Bedienungsanleitung

Winmate

Winmate W04FA3S-EHT1 Bedienungsanleitung

Winmate

Winmate W10IB3S-GSH2 Bedienungsanleitung

Winmate

Winmate R17IK3S-SPM1 Bedienungsanleitung

Winmate

Winmate R15IB7T-POC3 Bedienungsanleitung

Winmate

Winmate R15FA3S-PCC3-PoE Bedienungsanleitung

Winmate

Winmate R10IBWS-MHP1 Bedienungsanleitung

Winmate

Winmate R10L100-PCT2-PoE Bedienungsanleitung

Winmate

Winmate W10IB3S-GSH1HB Bedienungsanleitung

Winmate

Winmate R19IB7T-GCM1 Bedienungsanleitung

Winmate

Winmate T5-series Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung