Wohler VIS 700 Bedienungsanleitung
The Measure of Technology
EN
Manual
HD-Pushrod Camera
Wohler VIS 700
Order no. 24371 2020-02-24
Contents
2
Table of contents
1General Information..............................5
1.1 Operation Manual Information....................... 5
1.2 Copyright....................................................... 5
1.3 Notes............................................................. 5
1.4 Proper use..................................................... 6
1.5 Scope of supply............................................. 6
1.6 Storage and transport.................................... 7
1.7 Information on disposal ................................. 7
1.8 Manufacturer ................................................. 7
2Important information ..........................8
3Technical data .....................................11
3.1 Monitor ........................................................ 11
3.2 Wöhler pan & tilt camera head .................... 12
3.3 HD – Mini Camera Head ........................... 13
3.4 Camera Rod................................................ 14
3.5 Electronic meter counter ............................. 14
3.6 Storage........................................................ 14
3.7 Twinwall hard case...................................... 15
4Design and function ...........................16
4.1 Video Inspection System............................. 16
4.2 Monitor ........................................................ 18
5Starting to use your camera system.20
5.1 Activating the battery................................... 20
5.2 Attaching the camera head ......................... 20
5.3 Fixing the Guidance Ball ............................. 20
5.4 Using the monitor ........................................ 22
5.5 Charging the rechargeable battery.............. 25
6Keys and their functions....................26
6.1 On/Off key ................................................... 26
6.2 Video key .................................................... 27
6.3 Image key.................................................... 28
6.4 Joystick ....................................................... 28
7Display elements.................................29
Contents
3
8Displayed position of the camera head
..............................................................30
9Home function.....................................30
10 Digital meter counter.......................... 30
11 Voice recording ..................................31
12 Live menu ............................................ 31
12.1 Brightness menu.......................................... 31
12.2 Focus menu................................................. 32
12.3 Comment function........................................ 32
12.4 System menu............................................... 35
12.4.1 Activate WLAN............................................. 35
12.4.2 Locator......................................................... 35
12.4.3 Saving and deleting images and videos ...... 36
12.4.4 Display images and videos ..........................37
12.4.5 Settings........................................................ 39
12.4.6 Info menu..................................................... 41
13 Working with the Light Ring..............43
13.1 System requirements................................... 43
13.2 Installing the light ring .................................. 43
13.3 Dimming the lighting .................................... 45
14 Transmission of image files via WLAN
..............................................................46
14.1 Access Point: Transmission via a VIS 700-
WLAN-network............................................. 47
14.1.1 Select WLAN channel..................................47
14.1.2 Change password if necessary....................47
14.2 Client: Using an existing WLAN network ..... 50
15 Faults ...................................................53
15.1 Reset ........................................................... 53
15.2 Possible malfunctions .................................. 53
16 Maintenance ........................................ 54
16.1 Information on maintenance ........................ 54
16.2 Replacing the dome of the camera head..... 54
16.3 Camera head............................................... 54
Contents
4
16.4 Monitor ........................................................ 54
16.5 Cleaning the viper and the rod .................... 54
17 Guaranty and Service .........................59
17.1 Guaranty ..................................................... 59
17.2 Service ........................................................ 59
18 Declaration of conformity ..................60
General Information
5
1 General Information
1.1 Operation Manual In-
formation
This operation manual allows you to work safely
with the Wohler VIS 700. Please keep this manual
for your information.
The Wohler VIS 700 should be employed by pro-
fessionals for its intended use only.
Liability is void for any damages caused by not
following this manual.
1.2 Copyright
Without previous authorization of Wohler it is not
allowed to reproduce, copy or translate this man-
ual or part of this manual.
1.3 Notes
WARNING!
Not following this warning can cause injury or
death.
CAUTION!
Highlights risks that can lead to damage occurring
to the device.
NOTE!
Highlights tips and other useful information.
General Information
6
1.4 Proper use
The Camera is designed to visually inspect and
document the condition of pipes and shafts, for
example in flue gas systems, ventilation systems
as well as for inspecting underground pipes etc.
The Camera is designed to be used by trained
specialists only.
Any other use is considered improper use.
1.5 Scope of supply
Device
Scope of supply
Wohler VIS 700 HD
Service Camera
Monitor
Ø 40 mm pan and tilt
color camera head,
pluggable (option)
Ø 26 mm miniature
camera head, plug-
gable (option)
SD card 32 GB
Viper with
30 m camera rod and
monitor cable 1,5 m
3 replacement plastic
domes
1 guidance ball
1 anti-slide mat
1 USB power supply
with USN-C-cable
Twinwall hard case
General Information
7
1.6 Storage and transport
To avoid damage occurring during transport it is
imperative that the complete system is transport-
ed in the original case designed for the purpose.
1.7 Information on disposal
Electronic equipment does not belong into domes-
tic waste, but must be disposed in accordance
with the applicable statutory provisions.
You may hand in any defective batteries taken out
of the unit to our company as well as to recycling
places of public disposal systems or to selling
points of new batteries or storage batteries.
1.8 Manufacturer
Wöhler Technik GmbH
Wöhler-Platz 1
33181 Bad Wünnenberg
Tel.: +49 2953 73-100
Fax: +49 2953 73-96100 ·
www.woehler.com
Important information
8
2 Important information
Body Protection
WARNING!
Never point a connected camera head at your own
or somebody else's eyes when the monitor is
switched on. The LEDs are extremely bright and
can dazzle.
WARNING!
Guide the rod with due care and attention. As the
rod is made of flexible material, it can make whip-
ping movements if it slips. Protect your eyes in
particular.
WARNING!
In order to limit the exposure of persons to elec-
tromagnetic fields, a safety distance of 5 cm must
be maintained when the locating transmitter is
switched on and when the user is temporarily or
permanently near the camera head.
Working environment
WARNING!
Only place the camera on firm level ground and
ensure a secure position of camera and user, es-
pecially when working in high altitude, e.g. when
working on the roof.
WARNING!
Make sure that the parts that you are going to in-
spect are no live parts.
CAUTION!
Protect the camera head against oil and acid.
Never use the camera head and rod to push ob-
structions.
Important information
9
Operating Temperature
CAUTION!
Do not use the camera in temperatures above
40°C. High temperatures can damage the camera.
Resistance to water
CAUTION!
Only the camera head and the rod are waterproof
Keep the camera system dry and protect it from
water!
Resistance to impacts
CAUTION!
The camera system is not impact resistant. Do not
throw or allow the case to fall!
Accessories
CAUTION!
Use only original Wöhler accessories and spare
parts!
Bending the camera rod
Attention!
Never bend the camera rod over the narrow side
but only over the wide side.
The minimum bending radius must always be
240 mm or more.
Strong magnetic or electric
fields NOTE!
Do not use the camera near television towers,
mobile radio equipment or other sources of mag-
netic or electric fields, as these may impair the
quality of the displayed image.
bending
possible
bending
not
possible
Important information
10
Extraneous influences
NOTE!
Extraneous influences such as static discharges
can cause the device to malfunction. If a malfunc-
tion occurs, switch the monitor off and on again.
Andere Handbücher für VIS 700
5
Inhaltsverzeichnis
Andere Wohler Analytisches Instrument Handbücher
Wohler
Wohler VE 400 Bedienungsanleitung
Wohler
Wohler Camera Viper VIS 2000 Bedienungsanleitung
Wohler
Wohler VE 200 Bedienungsanleitung
Wohler
Wohler VIS 2000 Bedienungsanleitung
Wohler
Wohler VIS 700 Bedienungsanleitung
Wohler
Wohler VIS 200 Bedienungsanleitung
Wohler
Wohler VIS Camera Viper 36 Bedienungsanleitung
Wohler
Wohler VE 200 Bedienungsanleitung
Wohler
Wohler VIS 400 Bedienungsanleitung
Wohler
Wohler Lokator L 24 Bedienungsanleitung
