Xantrex MS2000 Bedienungsanleitung

MS2000 Sine Wave Inverter/Charger

Operation Guide

MS2000

MS2000 Sine Wave Inverter/Charger

Operation Guide

About Xantrex

Xantrex Technology Inc. is a world-leading supplier of advanced power electronics and controls with products from

50 watt mobile units to one MW utility-scale systems for wind, solar, batteries, fuel cells, microturbines, and backup

power applications in both grid-connected and stand-alone systems. Xantrex products include inverters, battery

chargers, programmable power supplies, and variable speed drives that convert, supply, control, clean, and distribute

electrical power.

Trademarks

MS2000 Sine Wave Inverter/Charger is a trademark of Xantrex International. Xantrex and Xanbus are registered

trademarks of Xantrex International.

Other trademarks, registered trademarks, and product names are the property of their respective owners and are used

herein for identification purposes only.

Notice of Copyright

Disclaimer

UNLESS SPECIFICALLY AGREED TO IN WRITING, XANTREX TECHNOLOGY INC. (“XANTREX”)

(a) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY

TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION.

(b) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSS OR DAMAGE, WHETHER DIRECT,

INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH

INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’S RISK.

Date and Revision

August 2004 Rev A

Part Number

975-0125-02-01

Contact Information

Telephone: 1 800 670 0707 (toll free North America)

1 360 925 5097 (direct)

Fax: 1 800 994 7828 (toll free North America)

1 360 925 5143 (direct)

Email: customerservice@xantrex.com

Web: www.xantrex.com

975-0125-02-01 iii

About This Guide

Purpose

The MS2000 Sine Wave Inverter/Charger Operation Guide provides explanations

and procedures for operating, configuring, and troubleshooting the MS2000 Sine

Wave Inverter/Charger (MS2000).

Scope

The guide provides safety guidelines and information about operating,

configuring, and troubleshooting the unit. It does not include installation

information or battery information. Refer to the MS2000 Sine Wave Inverter/

Charger Installation Guide.

For detailed information about particular brands of batteries, you will need to

consult individual battery manufacturers.

Audience

The guide is intended for users who need to operate, configure, and troubleshoot

the MS2000 Sine Wave Inverter/Charger.

Organization

This guide is organized into four chapters and three appendixes.

Chapter 1, “Introduction”, outlines the main performance and safety features of

the MS2000 Sine Wave Inverter/Charger. Reading this chapter will give you a

clear understanding of the inverter/charger’s capabilities.

Chapter 2, “Operation”, provides information about operating the MS2000.

Details are provided on how to read the front panel indicators to monitor the

MS2000.

Chapter 3, “Configuration”, explains how to configure the MS2000 from the

control panel.

Chapter 4, “Troubleshooting”, explains how to identify and solve problems that

can occur with the MS2000.

Appendix A, “Specifications”provides electrical, physical, and performance

specifications for the inverter/charger. It also provides Echo Charger

specifications.

Appendix B, “Battery Charging Reference for the Main Charger”provides

information on three-stage charging, two-stage charging, and charging times.

Appendix C, “Terminology”provides a glossary and a listing of commonly used

abbrevations and acronyms.

About This Guide

iv 975-0125-02-01

“Warranty and Product Information”contains the product warranty, explains how

to return a product for service, and describes what to prepare for a call to Xantrex

Customer Service.

Conventions Used

The following conventions are used in this guide.

Symbols Used

The following symbols are used on the product labels or in this guide.

WARNING

Warnings identify conditions or practices that could result in personal injury or

loss of life.

CAUTION

Cautions identify conditions or practices that could result in damage to the unit or

other equipment.

Important:

These notes describe an important action item or an item that

you must pay attention to.

In this guide: Important information, warnings or cautions.

On the product: Important information, warnings or cautions

with further explanation in the product guides.



AC –Alternating current

(

DC –Direct current

Warning: Hot surface. Do not touch.



DC ground connection point



AC safety ground connection point from incoming AC source



AC safety ground connection point for AC output (to AC loads)

About This Guide

975-0125-02-01 v

Related Information

For related materials on this product and its available accessories, see also:

MS2000 Sine Wave Inverter/Charger Installation Guide (975-0126-02-01)

System Control Panel Owner’s Guide (975-0083-01-01)

Automatic Generator Start Owner’s Guide (975-0082-01-01)

Xanbus System Installation Guide (975-0136-01-01)

More information about Xantrex Technology Inc. as well as its products and

services, including a complete list of Xanbus-enabled devices, is available at

www.xantrex.com

Contact Information

Telephone: 1 800 670 0707 (toll free North America)

1 360 925 5097 (direct)

Fax: 1 800 994 7828 (toll free North America)

1 360 925 5143 (direct)

Email: customerservice@xantrex.com

Web: www.xantrex.com

975-0125-02-01 vii

Important Safety Instructions

READ AND SAVE THESE INSTRUCTIONS

The MS2000 Sine Wave Inverter/Charger Operation Guide contains important

safety instructions.

Before you install and use your MS2000 Sine Wave Inverter/Charger, be sure to

read, understand and save these safety instructions and those in the other product

guides.

Read all instructions and cautionary markings on the inverter/charger, the

batteries and all appropriate sections of this guide.

1. Use of accessories not recommended or sold by Xantrex Technology, Inc.

may result in a risk of fire, electric shock, or injury to persons.

2. The inverter/charger is designed to be permanently connected to your AC and

DC electrical systems. Xantrex recommends that all wiring be done by a

certified technician or electrician to ensure adherence to the local and national

electrical codes applicable in your application.

3. To avoid a risk of fire and electric shock, make sure that the existing wiring is

in good condition and that the wire is not undersized. Do not operate the

inverter/charger with damaged or substandard wiring.

4. To reduce risk of damage and injury, charge only rechargeable

lead-acid batteries: flooded, gel, or absorbed glass mat (AGM) types. Other

types of batteries may burst causing personal injury and damage.

5. Do not operate the inverter/charger if it has received a sharp blow, been

dropped, or otherwise damaged in any way. If the unit is damaged, see the

“Warranty and Product Information”section in the MS2000 Sine Wave

Inverter/Charger Operation Guide.

6. Do not disassemble the inverter/charger; it does not contain user serviceable

parts. Take it to a qualified service person when service or repair is required.

Incorrect reassembly may result in a risk of electrical shock or fire. Internal

WARNING: Risk of injury or loss of life

The MS2000 Sine Wave Inverter/Charger shall not be used in connection with

life support systems or other medical equipment or devices.

WARNING

The following warnings identify conditions or practices that could result in

personal injury or loss of life.

Safety

viii 975-0125-02-01

capacitors remain charged after all power is disconnected. For instructions on

obtaining service, see the “Warranty and Product Information”section in the

MS2000 Sine Wave Inverter/Charger Operation Guide.

7. Do not expose the inverter/charger to rain, snow, or splashing bilge water.

8. To reduce risk of electric shock, disconnect all sources of AC and DC power

from the inverter/charger attempting any maintenance or cleaning. Turning

off controls will not reduce this risk.

9. The inverter/charger must be provided with equipment grounding conductors

connected to the AC input ground and chassis ground terminals.

To reduce the risk of overheating, keep the ventilation openings clear and do not

install the inverter/charger in a compartment with limited airflow or inadequate

clearances around the unit. Refer to the MS2000 Sine Wave Inverter/Charger

Installation Guide for required clearance.

CAUTION

Cautions identify conditions or practices that could result in damage to the unit or

other equipment.

Andere Handbücher für MS2000

Inhaltsverzeichnis

Andere Xantrex Wechselrichter Handbücher

Xantrex

Xantrex XS400 Bedienungsanleitung

Xantrex

Xantrex GT5.0-NA-240 Bedienungsanleitung

Xantrex

Xantrex 815-3012-02 Bedienungsanleitung

Xantrex

Xantrex Freedom Xi 807-1000 Bedienungsanleitung

Xantrex

Xantrex Freedom XC2000-230V Bedienungsanleitung

Xantrex

Xantrex XPower 5000 Bedienungsanleitung

Xantrex

Xantrex PowerHub PH1800 Handbuch

Xantrex

Xantrex XDI2048 Bedienungsanleitung

Xantrex

Xantrex XPower Mobile Plug 75 Bedienungsanleitung

Xantrex

Xantrex Freedom SW 815-2012 Bedienungsanleitung

Xantrex

Xantrex PowerHub PH1800 Handbuch

Xantrex

Xantrex XPower 600 Bedienungsanleitung

Xantrex

Xantrex Freedom Xi 1000 Bedienungsanleitung

Xantrex

Xantrex IP1012 AL Bedienungsanleitung

Xantrex

Xantrex PV225S-480-P Bedienungsanleitung

Xantrex

Xantrex XPower Powerpack 300 Bedienungsanleitung

Xantrex

Xantrex Freedom SW 815-2024 Bedienungsanleitung

Xantrex

Xantrex Fleet Power FP 3000-12 Bedienungsanleitung

Xantrex

Xantrex FREEDOM HF 1000 Bedienungsanleitung

Xantrex

Xantrex PROsine 2.0 Bedienungsanleitung

Xantrex

Xantrex PROwatt 600 Bedienungsanleitung

Xantrex

Xantrex 784-9115-01 Bedienungsanleitung

Xantrex

Xantrex GT3.0 Bedienungsanleitung

Xantrex

Xantrex XPower 175 PLUS Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

Astrel Group

Astrel Group Power Reducer Kurzanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung