Xiaomi S10 Bedienungsanleitung

Manual de usuario de Xiaomi Robot Vacuum S10 · 12

Manuel d’utilisation du Xiaomi Robot Vacuum S10 · 23

Manuale utente Xiaomi Robot Vacuum S10 · 34

Руководство пользователя Робота-пылесоса Xiaomi Robot Vacuum S10 · 45

Odkurzacz Xiaomi Robot S10 Instrukcja obsługi · 56

Xiaomi Roboterstaubsauger S10 Benutzerhandbuch · 67

Xiaomi Temizlik Robotu S10 Kullanım Kılavuzu · 78

· 89

· 99

Manual do utilizador do Aspirador robô Xiaomi S10 · 109

Посібник користувача Робота-пилососа Xiaomi Robot Vacuum S10 · 120

Robotický vysavač Xiaomi S10 – Uživatelská příručka · 131

Εγχειρίδιο χρήστη για τη ρομποτική σκούπα Xiaomi S10 · 142

Aspirator robotic Xiaomi S10 – Manual de utilizare · 153

Xiaomi Robotdammsugare S10 Användarhandbok · 164

Panduan Pengguna Xiaomi Robot Vacuum S10 · 175

ﻦﻣ تﻮﺑوﺮﻟا ﺔﻴﺋﺎﺑﺮﻬﻜﻟا ﺔﺴﻨﻜﻤﻟا مﺪﺨﺘﺴﻣ ﻞﻴﻟد

Xiaomi S10

יטובור קבא באושב שמתשמל ךירדמ

Xiaomi S10

Robot Vacuum S10 User Manual · 01

Safety Instructions

Usage Restrictions

• This appliance can be used by children aged from 8 years and above and persons

with reduced physical, sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction concerning use of

the appliance in a safe way and understand the hazards involved. Children shall

not play with the appliance. Cleaning and user maintenance shall not be made by

children without supervision.

• The appliance is only to be used with the power supply unit provided with the

appliance.

• This appliance contains baeries that are only replaceable by skilled persons.

• Please keep the cleaning brush out of reach of children.

• Keep hair, loose clothing, ﬁngers, and all parts of body away from openings and

moving parts.

• Do not use the robot vacuum to clean any burning substances.

• Do not pick up the robot vacuum by its laser radar cover.

• Make sure the robot vacuum is turned oﬀ and the power adapter is unplugged

before cleaning or performing maintenance.

Read this manual carefully before use, and retain it for future reference.

This product is for ﬂoor cleaning in a home environment only. Do not use it

outdoors, on non-ﬂoor surfaces, or in a commercial or industrial seing.

• This robot vacuum is only intended to clean ﬂoors in a home environment. Do not

use it outdoors such as on an open balcony or on a surface that is not a ﬂoor, like

a sofa, or in a commercial or industrial seing.

• Do not use the robot vacuum in an area suspended above ground level, such as a

lo, open balcony, or on top of furniture, unless a protective barrier is present.

• Do not use the robot vacuum at an ambient temperature above 35°C or below 0°C

or on a ﬂoor with liquids or sticky substances.

• Pick up any cables from the ﬂoor before using the robot vacuum to prevent it from

dragging them while cleaning.

• Pick up any fragile or loose items from the ﬂoor, such as vases or plastic bags, to

prevent the robot vacuum from being obstructed or bumping into them and

causing damage.

• Do not place children, pets, or any item on top of the robot vacuum while it is

stationary or moving.

• Do not use the robot vacuum to clean the carpet.

• Do not allow the robot vacuum to pick up hard or sharp objects such as building

materials, glass, or nails.

• Do not spray any liquid into the robot vacuum (make sure the 2-in-1 dust

compartment with water tank is thoroughly dry before its reinstalling).

• Do not place the robot vacuum upside down (laser radar housing should never

touch the ground).

• This product's laser radar meets the IEC 60825-1:2014 Standard for Class 1 laser

Baeries and Charging

• WARNING: Do not use any third-party baery, charging dock. Use only with

<BLJ24W200120P-V> power adapter.

• Do not aempt to disassemble, repair, or modify the baery or charging dock on

your own.

• Do not place the charging dock near a heat source.

• Do not use a wet cloth or wet hands to wipe or clean the dock’s charging

contacts.

• If the robot vacuum will not be used for an extended period, fully charge it, then

turn it oﬀ and store in a cool, dry place. Recharge the robot vacuum at least once

every 3 months to avoid over-discharging the baery.

• The lithium-ion baery pack contains substances that are hazardous to the

environment. Before disposing of the robot vacuum, please ﬁrst remove the

baery pack, then discard, or recycle it in accordance with local laws and

regulations of the country or region it is used in.

product safety and does not produce laser radiation hazardous to the human

body.

• Only use this product as directed in the user manual. Users are responsible for

any loss or damage arising from improper use of this product.

• For detailed e-manual, please go to www.mi.com/global/service/userguide

• When removing the baeries from the product, it is beer to use up the baeries

and make sure your product is disconnected from power.

1). Uninstall the screw on the boom, then remove the cover.

2). Unplug the baery connector, then remove the baeries. Do not damage the

baery case to avoid any risk of injuries.

3). Return the baeries to a professional recycling organization.

Product Overview

Cover

Laser Distance Sensor

Buon/Indicator

Charging Dock

Le Wheel

Baery Pack

Mop Pad Assembly

Cliﬀ Sensor

Right Wheel

Side Brush

Brush Cover

Brush

IR Receiver Sensor

Collision Sensor

Indicator Status Descriptions

Working normally

In charging

Returning to charge/Firmware is upgrading

White

Slowly blinking white

Blinking white

Wi-Fi disconnected

Error

Shutdown/In sleep

Yellow

Blinking yellow

Oﬀ

Charging Indicator

(Remain white when the robot

vacuum is connected to power)

Turn on/oﬀ: Press and hold for three seconds

Start/Pause cleaning: Press

Return to charge/stop docking: Press

Remove the protective ﬁlm from the charging dock. Place the charging dock against

a wall and connect it to the power. Then place the robot vacuum onto the charging

dock to charge.

0.5 m

1.5 m

Before Use

CAUTIONS:

Do not place the charging dock in an area with direct sunlight.

Please ensure that no items are placed within 0.5 m on the le and right sides and

within 1.5 m in front of the charging dock.

It is recommended to fully charge the robot vacuum before using it for the ﬁrst

time to maintain its optimal baery performance and maximize baery life.

The robot vacuum will turn on automatically when it is on the charging dock, and

cannot be turned oﬀ while charging.

Removal and Installation

Charging

Protective Strip Protective Strip

Side Brush

Please remove the protective strips from both sides of the robot vacuum.

Take out the side brush, and install it onto the position as indicated in the ﬁgure.

The side brush is properly installed when you hear a "click".

Connecting with Mi

Home/Xiaomi Home App

This product works with the Mi Home/Xiaomi Home app*. Use the Mi

Home/Xiaomi Home app to control your device, and to interact with other

smart home devices.

Scan the QR code to download and install the

app. You will be directed to the connection

setup page if the app is installed already. Or

search "Mi Home/Xiaomi Home" in the app

store to download and install it.

Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then

follow prompts to add your device.

* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of

the app displayed on your device should be taken as the default.

Notes:

• The version of the app might have been updated, please follow the instructions based

on the current app version.

• If the robot vacuum's QR code cannot be scanned, you can search for its name to add it.

• When connecting the robot vacuum to the Mi Home/Xiaomi Home app using an iOS

device, follow the instructions in the app to connect to the robot vacuum's hotspot

"ĳai-vacuum-v17_miapXXXX".

8A347322

Press and hold the buon for ﬁve seconds until you hear a "beep", and then

press and hold the buon for ﬁve seconds again until you hear the voice prompt.

The robot vacuum then restarts, and seings like scheduled cleaning and Wi-Fi are

restored to factory default.

Reseing System

While the robot vacuum is turned on, press and hold the buons and for seven

seconds. The Wi-Fi is successfully reset when you hear a voice prompt.

Reseing Wi-Fi

How to Use

1. Take out the 2-in-1 dust compartment with water tank, open the plug,

ﬁll with clean water, and then refasten the plug. Install the 2-in-1 dust

compartment with water tank onto the robot vacuum in the direction

indicated in the ﬁgure, and make sure that the clip is ﬁrmly clasped.

2. Before using the vacuuming & mopping function, dampen the mop pad

and wring it out and then install it onto the mop pad holder. Slide the

mop pad holder along the boom of the robot vacuum horizontally in

the direction indicated in the ﬁgure until it clicks into place.

3. Press the buon to start vacuuming and mopping.

CAUTIONS:

Please remove the 2-in-1 dust compartment with water tank before adding water.

Do not add liquids such as hot water, detergent, or disinfectant to prevent

damaging the robot vacuum.

Due to production testing, the 2-in-1 dust compartment with water tank may have

water stains, which is normal.

Clip Plug

It is properly installed

when you hear a "click".

Open the plug and

add water.

① ② ③

If only vacuuming function is needed, please remove the mop

pad holder.

Clips

Press the clips and pull

the mop pad holder out.

Start Vacuuming & Mopping

CAUTIONS:

Remove the 2-in-1 dust compartment with water tank and pour out the leover

water in a timely manner aer a mopping task has been completed. Then clean and

dry the mop pad to prevent odor and mildew.

When the robot vacuum is running, please set up virtual walls or restricted areas

for carpeted areas in your home to avoid the robot vacuum from becoming

entangled in the carpet.

Notes:

For cleaning and maintaining the 2-in-1 dust compartment with water tank & mop

pad assembly, please refer to the labels on the tank and mop pad holder.

It is recommended to clean the cliﬀ sensor every three months with a so cloth.

Please refer to the table for accessory replacements to ensure the optimal

cleaning eﬀect.

1. Remove the side brush.

2. Press and hold the clips to remove the brush cover, then remove the

brush, and pull out the brush bearing.

3. Use the cleaning brush to clean.

Brush and Side Brush

Cleaning the Brush

Cut the hair Remove dirt and debris

Clip

Brush Cover

Brush

Brush Bearing

Side Brush

Care & Maintenance

Press and hold the

clips to remove.

Side brush

Components Maintenance Frequency Replacement Frequency

Brush

Filter

Brush cover

Every 3–6 months

Every 6–12 months

Every 3–6 months

Every 3–6 months (or upon worn)

Every two weeks

Weekly

Mop pad Every 3–6 months (or upon worn)Aer each use

When the robot vacuum is running, press any buon to pause. Press the

buon to resume cleaning.

Note: The robot vacuum will enter sleep mode aer being paused or in standby mode

for ﬁve minutes. Press any buon to wake it up.

Pausing

When the robot vacuum is working, pause it ﬁrst then remove the 2-in-1

dust compartment with water tank to add water or clean the mop pad.

Then reinstall the 2-in-1 dust compartment with water tank and press the

buon to resume the task.

Adding Water or Cleaning the Mop Pad

When the robot vacuum is working, press the buon to pause the task,

and press the buon again to send the robot vacuum to return to the

dock to charge.

When the robot vacuum is in standby mode and not connected to the

charging dock, press the buon to send the robot vacuum to return to

the dock to charge. When a task is complete or the baery is too low, the

robot vacuum will automatically return to the dock to charge.

Docking & Charging

In the do not disturb (DND) mode, the robot vacuum does not resume

cleanup, perform scheduled cleanups or play voice prompts, and the

indicator turns oﬀ aer one minute of charging. The DND mode can be

enabled or disabled in the app.

Note: Please refer to the app for more features, including Clean There, Resume

Cleanup, Scheduled Cleanup, and Virtual Walls.

DND mode

Notes:

When using the robot vacuum for the ﬁrst time, please follow the in-app prompts to

complete quick map creation. To ensure accurate mapping, it is recommended to

follow the robot vacuum and remove any obstacles on the ground when it is creating

the map. Make sure the robot vacuum starts from the charging dock.

If the robot vacuum may get stuck or scratch the surface of the furniture in some

areas, you can set restricted areas in the app to prevent the robot vacuum from

entering those areas.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Xiaomi Staubsauger Handbücher

Xiaomi

Xiaomi Mi Robot Vacuum-Mop Essential Bedienungsanleitung

Xiaomi

Xiaomi G9 Plus Bedienungsanleitung

Xiaomi

Xiaomi Mi Robot Vacuum-Mop 2 Bedienungsanleitung

Xiaomi

Xiaomi Mi Robot Vacuum-Mop P Bedienungsanleitung

Xiaomi

Xiaomi Mi Robot Vacuum-Mop 2 Pro+ Bedienungsanleitung

Xiaomi

Xiaomi Dreame V10 Bedienungsanleitung

Xiaomi

Xiaomi Mop 2 Pro Bedienungsanleitung

Xiaomi

Xiaomi Mi 1C Bedienungsanleitung

Xiaomi

Xiaomi Dreame V9 Bedienungsanleitung

Xiaomi

Xiaomi Roborock S7 MaxV Bedienungsanleitung

Xiaomi

Xiaomi Mi Vacuum Cleaner G9 Bedienungsanleitung

Xiaomi

Xiaomi Mi phone Bedienungsanleitung

Xiaomi

Xiaomi G10 Plus Bedienungsanleitung

Xiaomi

Xiaomi Dreame Bot L10 Pro Bedienungsanleitung

Xiaomi

Xiaomi Mi Robot Vacuum-Mop Essential Bedienungsanleitung

Xiaomi

Xiaomi Jimmy JV83 Bedienungsanleitung

Xiaomi

Xiaomi Mop 2 Pro Bedienungsanleitung

Xiaomi

Xiaomi Mi Robot Vacuum-Mop 2 Ultra Auto-empty... Bedienungsanleitung

Xiaomi

Xiaomi Mi G10 Bedienungsanleitung

Xiaomi

Xiaomi Mi Robot Vacuum-Mop Bedienungsanleitung

Xiaomi

Xiaomi Xiaowa E2 Series Bedienungsanleitung

Xiaomi

Xiaomi MJSTG1 Bedienungsanleitung

Xiaomi

Xiaomi Mi Robot Vacuum-Mop 2 Pro+ Bedienungsanleitung

Xiaomi

Xiaomi Mi Robot Vacuum X10 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung