ZALMAN CNPS7000C-Cu/AICu Bedienungsanleitung

1) Does not generate noise or vibration in Silent Mode.

2) Pure copper and/or pure aluminum base materials ensure excellent heat dissipation.

3) Compatible with single and dual core CPUs for Intel Socket 775 and AMD Sockets

AM2/754/939/940.

4) 92mm fan inside the heatsink maximizes airflow.

5) Adjustable fan speed controller(Fan Mate 2) enables control of noise and fan

performance.

1) Please refer to "Compatible CPUs" on page 3 to confirm that your CPU is compatible with

the CNPS7000C before installing.

2) Check the components list and condition of the product before installation. If any problem is

found, contact the retailer.

3) Excessive force exerted on the fan may damage the fan, resulting in damage to the system.

4) Avoid inserting any objects into the fan while it is in operation.

5) Use and keep the product away from the reach of children.

6) Do not ingest the Thermal Grease and avoid its contact with eyes and skin. In case of bodily

contact wash off with water, and if ingested, seek the advice of a doctor.

7) To prevent possible injuries or accidents please wear gloves while handling this product.

1) Cooler

2) Fan Mate 2

- Output Voltage : 5V ~ 11V

2 %

- Power Consumption : 6W or lower

Note 1) The maximum weight for a cooler is specified as 450g for Intel Socket 775 and

AMD Socket AM2/754/939/940. Special care should be taken when moving a

computer equipped with a cooler which exceeds the relevant weight limit. Zalman

is not responsible for any damage that occur while moving a computer.

Note 2) The fan operates at 2,650rpm(27.5dBA

10%) if directly connected to the

motherboard’s power connector without the use of Fan Mate 2.

Note 3) Measured 1m distance away from source.

Disclaimer) ZalmanTech Co., Ltd. is not responsible for any damages due to external causes,

including but not limited to, improper use, problems with electrical power, accident,

neglect, alteration, repair, improper installation, or improper testing.

①Cooler (CNPS7000C-Cu/AlCu)

②Thermal Grease

③Clip Support for Socket 775

④Backplate for Socket 775

⑤Clip Support Fixing Bolt (4 bolts)

⑥Clip A

⑦Installation Bolt (4 bolts)

⑧Clip B

⑨Clip Lever

⑩Fan Speed Controller (Fan Mate 2)

⑪Cable for Fan Mate 2

⑫Double-Sided Tape (for Fan Mate 2 Attachment)

⑬User’s Manual (in English and Korean)

Caution)

No motherboard components with a height greater than

39mm, as well as the PSU, disk drives, VGA card, and

RAM should be present within a 55mm radius from the

center of the CPU.

1) Clip Installation

Clip A(⑥) is installed in the factory so INTEL socket

users DO NOT have to exchange the Clip. To re-

install Clip A(⑥), adhere to the following instructions.

A. Unfasten the Fan Support Fixing Screws and disassemble the Fan Support

from the Heatsink.

B. Insert Clip A(⑥) in the direction of the Fan Support’s *Fan Lead Wire. Make

sure the Clip is inserted under the **Protruded Part of the Fan Support.

C. After installing the Fan Support onto the Heatsink, please secure with the

Fan Support Fixing Screws(refer to the diagram below).

※Please make sure that Clip A/B is installed correctly.

※Do not exert excessive force on the fan during the installation for it may damage the fan.

1) Intel Socket 775 CPUs

2) AMD Socket AM2/754/939/940 CPUs

Align the Clip Support for Socket 775 (

③

) and the Backplate for Socket 775 (

④

) with the

mounting holes on the motherboard and fasten them together with the Clip Support Fixing

Bolts (

⑤

). The Lever Slot on the Clip Support for Socket 775 should be properly oriented

on the hinged side of the Socket Lever when installing.

※

If the Lug of the Clip Support for Socket 775 interferes with any motherboard

components, install the Clip Support for Socket 775 with the Lug facing a different

direction to avoid interference.

Clear off particles and any residue from

the top of the CPU then spread an

adequate amount of the included

Thermal Grease (

②

) on the CPU surface

thoroughly.

Set the Cooler at the center of the CPU. Screw the Installation bolts in slightly, then

tighten each bolt a few turns at a time while alternating between the two until the clip

support is completely pressed against the Clip.

◆Please refer to Fan Mate 2 Installation and Usage on page 6.

2) Clip Support Installation

3) Thermal Grease Application

4) Cooler Installation

5) Power Connection (Fan Mate 2 Connection)

Clear off particles or any residue from the top of the

CPU then spread a thin layer of the included

Thermal Grease thoroughly on top of the CPU.

Clip A(⑥) is installed in the factory so

AMD socket users MUST remove

Clip A and install Clip B(

⑧⑧

). Adhere to the following instructions to change the clip.

A. Unfasten the Fan Support Fixing Screws and disassemble the Fan Support from the

Heatsink.

B. Insert Clip B(

⑧

) in the direction of the Fan Suppor’s *Fan Lead Wire. Make sure the

Clip is inserted under the **Protruded Part of the Fan Support.

C. After installing the Fan Support to the Heatsink, please secure with the Fan Support

Fixing Screws(refer to the diagram below).

Insert the Clip Lever(

⑨

) into the Clip B(

⑧

). Connect the Clip's Lug Slot with a Lug of the

Retention Frame on the motherboard. Press onto the Clip Lever(

⑨

) when aligning the

Lever's Lug Slot and the other Lug.

※

Using a flat-head screwdriver is recommended for easier installation

and removal.

◆Please refer to Fan Mate 2 Installation and Usage on page 6.

2) Thermal Grease Application

1) Clip Installation

3) Cooler Installation

4) Power Connection (Fan Mate 2 Connection)

※Please make sure that Clip A/B is installed correctly.

※Do not exert excessive force on the fan during the installation for it may damage the fan.

◆When the Speed Control Knob on Fan Mate 2 is turned counter-clockwise, fan speed is

lowered. Turned clockwise, it is increased. Thus, you can select the desired fan speed by

turning the knob.

Please adjust the fan speed to a desired setting. For CPU temperature specifications,

please inquire to the CPU manufacturer.

Note) Fan Mate 2 has been specifically designed for the fan of this product.

ZalmanTech Co., Ltd. is not responsible for any damages to the system or CPU

resulting from its use with other types of fans.

ZalmanTech Co., Ltd. is not responsible for any damages resulting from CPU

Overclocking.

The computer system may automatically shut down when booting the computer after the

system monitoring program outputs a warning stating that the CPU fan is rotating slowly.

In such a case, fully turn the Speed Control Knob in the clockwise direction before

rebooting to disable the 'CPU Fan Detected' option in BIOS, or set the CPU fan's

rotational speed to 1,350rpm or lower in the system monitoring program.

Note) Some motherboards fail to boot if the rotational speed of the CPU fan is below a

certain rpm. However, booting can be possible even at low fan rpm if the BIOS

settings are updated. For more information on updating the BIOS, please refer to the

website of the motherboard's manufacturer. There are motherboards which fail to

detect the rpm while operating the cooler in Silent Mode, but this does not affect

computing performance.

Pull the 6-Pin Connector

(⑬)

out of the

system through the back and connect it to

Fan Mate 2

(⑪)

, which should be installed

on the case using the included Double-

Sided Tape

(⑩)

Connect the two 3-pin connectors of the cable to

the motherboard and to the CNPS7000C’s Fan

Connector as shown in the diagram.

1) Fan Mate 2 Installation on the Inside of a System

2) Fan Mate 2 Installation on the Outside of a System

1) Caution During Booting

2) Overclocking

Zalman's Ultra Quiet Power Supplies, Fanless Northbridge Coolers, Heatpipe HDD Cooler,

Ultra Quiet Case Fans, VGA Coolers, and Multi Fan Controllers facilitate stable performance

and a noiseless computing environment.

TRIMON series monitors are capable of fine 2D imaging

and ultra clear stereoscopic 3D imaging, making it ideal

for 3D games, movies, design, scientific research, and

presentations.

For more information, please visit our website.

The GS1000 enclosure features E-ATX / Standard ATX /

microATX compatibility, up to 6 Hot Swap HDD Bays,

tool-free HDD installation, airflow optimized design, the

world’s first roller rails for smooth & easy PSU

installation, cable compartment behind the motherboard

for cable management, dedicated fan compartment for

fanless PSU users, and up to 8 HDD bays.

For more information, please visit our website.

Inhaltsverzeichnis

Andere ZALMAN Computerhardware Handbücher

ZALMAN

ZALMAN CNPS9800 MAX Bedienungsanleitung

ZALMAN

ZALMAN FX100 Bedienungsanleitung

ZALMAN

ZALMAN CNPS8700 NT Bedienungsanleitung

ZALMAN

ZALMAN Reserator 5 Bedienungsanleitung

ZALMAN

ZALMAN ZM-2HC2 Bedienungsanleitung

ZALMAN

ZALMAN CNPS7700 LED Bedienungsanleitung

ZALMAN

ZALMAN ZM80C-HP Bedienungsanleitung

ZALMAN

ZALMAN ZM500-ST Bedienungsanleitung

ZALMAN

ZALMAN CNPS17X Bedienungsanleitung

ZALMAN

ZALMAN ZM-RWB1 Bedienungsanleitung

ZALMAN

ZALMAN CNPS5100-Al Bedienungsanleitung

ZALMAN

ZALMAN CNPS20LQ Bedienungsanleitung

ZALMAN

ZALMAN Extreme Gaming VGA Cooler GV1000 Bedienungsanleitung

ZALMAN

ZALMAN CNPS8900 Series Bedienungsanleitung

ZALMAN

ZALMAN CNPS 7600 Bedienungsanleitung

ZALMAN

ZALMAN CNPS7700 LED Bedienungsanleitung

ZALMAN

ZALMAN CNPS8000B Bedienungsanleitung

ZALMAN

ZALMAN ZM-2HC2 Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000C Series Bedienungsanleitung

ZALMAN

ZALMAN CNPS9900 Max Bedienungsanleitung

ZALMAN

ZALMAN CNPS14X Bedienungsanleitung

ZALMAN

ZALMAN CNPS7700 LED Bedienungsanleitung

ZALMAN

ZALMAN CNPS5X PERFORMA Bedienungsanleitung

ZALMAN

ZALMAN CNPS7X Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung