ZALMAN CNPS9700 LED Bedienungsanleitung

* Please read this manual thoroughly before installation.

http://www.zalman.co.kr http://www.zalmanusa.com

IInntteell SSoocckkeett 777755 CCPPUU

Core 2 Duo

Dual Core Pentium

Pentium D

Pentium 4

Celeron D

AAMMDD SSoocckkeett AAMM22//775544//993399//994400 CCPPUU

Athlon 64 FX

Athlon 64 X2 Dual- Core

Athlon 64

Opteron

Sempron

(English version)

CNPS9700 NT

※

The specifications of any product may change without prior notice to improve performance.

3. Exploded View

Fan

Fan Support

CPU Block Cover

Heat sink

CPU Block Fixing Bolt

1. Features

1) Compatible with all single and dual core CPUs or Intel Socket 775 and AMD Sockets AM2/754/939/940.

2) Automatic Fan Speed Control eature included in the Ultra Quiet 110mm PWM(Pulse Width Modulation)

enabled an.

3) 100% copper heatsink with aerodynamically optimized “tunnel” design or maximum cooling e iciency.

4) Innovative, patented, “ igure 8” heatpipe design or a heat trans er capacity o up to six heatpipes with

the use o just three.

5) 0.2mm ultra-slim ins or minimized weight and reduced air low resistance.

6) Super Thermal Grease (ZM-STG1) included.

Rotation Speed

Note (1) The maximum weight or a cooler is speci ied as 450g or Intel Socket 775 and AMD Sockets

AM2/754/939/940. Special care should be taken when moving a computer equipped with a cooler

that exceeds the speci ied weight limit. Zalman is not responsible or any damage that occurs when

moving a computer.

Note (2) Measured at 1m rom noise source.

Note (3) Optimal per ormance will be reached a ter approximately 7 days o regular computer use rom the

time o installation.

CNPS9700 NT

Model

Spec.

Materials

Dimensions

(mm)

Heat Dissipation Area (

㎠

)

Weight(g)

Bearing Type

Noise Level (dBA)

Control Method

Capacity

Temperature Range

Pure Copper and Aluminum

90(L) X 124(W) X 142(H)

5,490

Heatsink : 690g, Total (including fan) : 764g

(1)

2 Ball-Bearing

1,250RPM ± 30 % ~ 2,800RPM ± 10 %

19.5dBA ~ 35dBA ± 10%

(2)

PWM Control, Auto Restart

3.5g

-40℃~150℃ (-40℉~302℉)

2. Specificatio s

Fan

ZM-STG1

(3)

※

The specifications of any product may change without prior notice to improve performance.

󳣍Korean Patent Reg. No. 10-0600448

󳣍Korean Design Reg. No. 30-0403411, 0403412

󳣍Patent applications pending in over 20 nations around the world including USA, EU, and Japan.

4. Pate ts

1) Excessive orce exerted on the an may damage the an, resulting in damage to the system.

2) Avoid inserting any objects into the an while it is in operation.

3) Use and keep the product away rom the reach o children and pets.

4) Check the components list and condition o the product be ore installation. I any problem is ound, contact

your place o purchase to obtain a replacement.

5) Do not ingest or make oral contact with the Thermal Grease. I ingested, get medical attention.

Disclaimer)

Zalman Tech Co., Ltd. is not responsible or any damages due to external causes, including but not limited

to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation,

or improper testing.

5. Precautio s

7. Compatible CPUs

1) All Intel CPUs o Socket 775

2) All AMD CPUs o Socket AM2/754/939/940

2) Components for A D Sockets A 2/754/939/940

❹

One (1) Clip or AMD Sockets

❺

One (1) Clip Lever or AMD Sockets

3) Components for Intel Socket 775

❻

One (1) Clip (S-Type)

❼

Four (4) Bolts ( or installing the cooler)

❽

Four (4) Clip Support Fixing Bolts or Socket 775

❾

One (1) Clip Support or Socket 775

❿

One (1) Backplate or Socket 775

1) General Components

❶

One (1) CNPS9700

❷

One (1) Thermal Grease (ZM-STG1)

❸

One (1) User’s Manual

6. Compo e ts

❶

❺

❹

❷

❿

❸

❼

❽

❾

❻

※

The specifications of any product may change without prior notice to improve performance.

8. I stallatio Requireme ts

I the case is equipped with an Air Guide, then the Air Guide Duct must be removed be ore installation.

Re er to the ollowing diagrams, and install only on systems that meet the ollowing installation requirements :

①

No inter ering components (PSU, graphic card etc.) within 62mm rom the center o the CPU.

No inter ering components (ODD etc.) within 48mm rom the center o the CPU.

Case cover must be at least 150mm apart rom the motherboard.

9. I stallatio

※※

The Clip Installation ethod

The CNPS9700 must be installed in the orientation that matches the rear system fan’s airflow.

(Re er to the diagram above)

The Clip installation method depends on the motherboard’s socket orientation.

Follow the correct installation method or your motherboard type.

Be care ul not to exert excessive orce on the an during installation o the Clip, as it may damage the an.

A. For motherboards with a horizontally-oriented Retention Guide

B. For motherboards with a vertically-oriented Retention Guide

Retention Guide

Clip

Retention Guide

Clip

Case Cover

150mm

Motherboard

PSU

62mm

System Fan

Air Flow

Case

48mm

Graphic Card Slot

※

The specifications of any product may change without prior notice to improve performance.

⑤⑤

Power Connection

◆

Please re er to “10. Power Connection” on page 6.

1) Intel Socket 775

①①

Clip Installation

Re er to “The Clip Installation Method” on page 3 to correctly install the Clip (S-Type,

⑥

) according to

the orientation o the Retention Guide.

②②

Clip Support Installation

Align the Clip Support or Socket 775 (

⑨

) and the Backplate or Socket 775 (

⑩

) with the mounting holes

on the motherboard, and asten them together by using the Clip Support Fixing Bolts (

⑧

The Lever Slot on the Clip Support or Socket 775 (

⑨

) must be properly oriented on the hinged side

o the socket lever when installing.

※

The Backplate Support on the Backplate or Socket 775 (

⑩

) can be removed i deemed unnecessary.

③③

Thermal Grease Application

Clear o particles or any residue rom the contact sur ace o the CPU and heatsink. Shake the

Thermal Grease (ZM-STG1,

②

) well then apply on the contact sur ace o the CPU and heatsink base.

CPUCPU

※

Note

When installing the CNPS9700 on a motherboard with a horizontally-

oriented Retention Guide, take extra care to not exert excessive orce

on the an. Excessive force may damage the fan.

Clip Support Fixing Bolt, ⑧

Clip Support or Socket 775, ⑨

Motherboard

Backplate or Socket 775, ⑩

Backplate Support

Socket Lever Hinge

Socket Lever

Lever Slot

④④

Cooler Installation

Insert two Bolts (

⑦

) into the holes o the Clip (S-type,

⑥

) and

place the CNPS9700 on the center o the CPU. Slightly asten

the Bolts (

⑦

) into the holes o the Clip Support or Socket 775

(

⑨

), then asten the Bolts (

⑦

) in an alternating manner until the

Clip (S-Type,

⑥

) is completely pressed against the Clip Support

or Socket 775.

Bolt, ⑦

Clip(S-Type), ⑥

※

The specifications of any product may change without prior notice to improve performance.

④④

Power Connection (FAN ATE 2)

◆

Please re er to “10. Power Connection” on page 6.

2) A D Socket A 2/754/939/940

①①

Thermal Grease Application

Clear o particles or any residue rom the contact sur ace o the CPU and heatsink. Shake the

Thermal Grease (ZM-STG1,

②

) well then apply on the contact sur ace o the CPU and heatsink base.

②②

Clip Installation

Re er to “The Clip Installation Method” on page 3 to correctly install the Clip or AMD Sockets (

④

) and Clip

Lever (

⑤

) on the CNPS9700 according to the orientation o the Retention Frame. First insert the Clip or

AMD Sockets (

④

) into the Heatsink (

①

), then connect the Clip Lever (

⑤

) with the Clip (

④

③③

Cooler Installation

Place the CNPS9700 on the center o the CPU. Align and connect the Slot o the Clip (

④

) with the

Center Lug o the Retention Frame. Press onto the Clip Lever (

⑤

) when aligning the Clip Slot and

Center Lug.

Clip’s Slot

Center Lug

Clip Lever,

⑤

Lever’s Slot

Center Lug

※

The specifications of any product may change without prior notice to improve performance.

10. Power Co ectio

Connect the CNPS9700 NT’s Fan Connector to the Motherboard as shown in the diagram.

11. Notes o Usage

1) Checking CPU Compatibility

Please re er to “Compatible CPUs” on page 2 to con irm that your CPU is compatible with the CNPS9700

be ore using it.

2) Cautions During Booting

Operation o the PWM an varies depending on the motherboard’s BIOS settings. Please activate the

PWM Control mode in the BIOS settings a ter installation. Re er to the motherboard’s manual or detailed

in ormation regarding the PWM Control mode.

3) Overclocking

Zalman Tech Co., Ltd. is not responsible or any damages resulting rom CPU Overclocking.

Fan Connector

(CNPS9700)

Motherboard

※

The specifications of any product may change without prior notice to improve performance.

14.

Home Theatre PC E closures

TNN Computer Enclosures are the world’s irst environment- riendly noiseless computer enclosures

that operate without the use o a an. TNN Computer Enclosures use the aluminum enclosure itsel

as a heatsink. They are ideal or environments that require silence, as well as or home theatre

systems and multi-media systems.

The HD160 is designed or ultra quiet home theatre

PC operation, utilizing optimized ventilation and

anti-vibration rein orcements, making it ideal or

environments that require silence such as living

rooms, bedrooms, educational acilities, and o ices.

For more information, please visit our website.

13.

TNN (Totally No Noise) Computer E closures

TNN 300 TNN 500AF

HD160

Zalman's Noiseless Power Supplies, Fanless Northbridge Coolers, Heatpipe HDD Cooler, Noiseless

Case Fans, VGA Coolers, and Fan Controllers acilitate stable per ormance and a noiseless

computing environment.

12. Zalma Computer Noise Preve tio System

Noiseless Power Supply Fanless Northbridge Cooler Heatpipe HDD Cooler

Noiseless Case Fan Ultra Quiet VGA Cooler Fan Controller

Andere Handbücher für CNPS9700 LED

Inhaltsverzeichnis

Andere ZALMAN Computerhardware Handbücher

ZALMAN

ZALMAN ZM-RWB1 Bedienungsanleitung

ZALMAN

ZALMAN ZM-2HC2 Bedienungsanleitung

ZALMAN

ZALMAN CNPS10X Optima (2011) Bedienungsanleitung

ZALMAN

ZALMAN CNPS10X Quiet Bedienungsanleitung

ZALMAN

ZALMAN CNPS14X Bedienungsanleitung

ZALMAN

ZALMAN Optima CNPS8X Bedienungsanleitung

ZALMAN

ZALMAN CNPS9500 AT Bedienungsanleitung

ZALMAN

ZALMAN RESERATOR2 Kurzanleitung

ZALMAN

ZALMAN Z9 series Bedienungsanleitung

ZALMAN

ZALMAN CNPS8700 NT Bedienungsanleitung

ZALMAN

ZALMAN CNPS8000B Bedienungsanleitung

ZALMAN

ZALMAN CNPS7500 LED Bedienungsanleitung

ZALMAN

ZALMAN ZM-WB2 Gold Bedienungsanleitung

ZALMAN

ZALMAN CNPS 4X Bedienungsanleitung

ZALMAN

ZALMAN ZM80D-HP Bedienungsanleitung

ZALMAN

ZALMAN CNPS 8000 Bedienungsanleitung

ZALMAN

ZALMAN MS800 Bedienungsanleitung

ZALMAN

ZALMAN VF2000 LED Bedienungsanleitung

ZALMAN

ZALMAN CNPS9700 LED Bedienungsanleitung

ZALMAN

ZALMAN CNPS9900 Max Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000C Series Bedienungsanleitung

ZALMAN

ZALMAN CNPS6500B-AlCu Bedienungsanleitung

ZALMAN

ZALMAN ZM-RWB1 Bedienungsanleitung

ZALMAN

ZALMAN Extreme Gaming VGA Cooler GV1000 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung