ZALMAN CNPS7500 LED Bedienungsanleitung

CNPS7500 LED

* Please read this manual thoroughly before installation.

http://www.zalman.co.kr http://www.zalmanusa.com

(English version)

CNPS8700 LED

IInntteell SSoocckkeett 777755 CCPPUU

Core 2 Quad

Core 2 Extreme

Core 2 Duo

Pentium D

Pentium 4

Celeron D

AAMMDD SSoocckkeett AAMM22//775544//993399//994400 CCPPUU

Athlon 64 FX

Athlon 64 X2 Dual-Core

Athlon 64

Opteron

Dual-Core Opteron

Sempron

※

The specifications of any product may change without prior notice to improve performance.

Note(1) The maximum weight for a cooler is specified as 450g for Intel Socket 775 and AMD Sockets

AM /754/939/940. Special care should be taken when moving a computer equipped with a cooler that exceeds

the specified weight limit. Zalman is not responsible for any damage that occurs when moving a computer.

Note (2) The fan operates at ,550rpm (35.5dBA) if directly connected to the motherboard’s power connector

without the use of Fan Mate .

Note(3) Measured at 1m distance away from the sound source.

CNPS8700 LED

Model

Spec.

Material Pure Copper

Dimensions 120(L) X 123(W) X 67(H)mm

Heat Dissipation Area 3300㎠

Weight 475g

(1)

Bearing Type 2 Ball-Bearing

Rotation Speed

(2)

1,150 ~ 2,300 rpm ± 10 %

Noise Level

(3)

17.5 ~ 33 dBA ± 10%

Output Voltage 5 ~ 11V ± 2%

Power Consumption 6W or lower

1. Features

1) Compatible with all single, dual, and quad core CPUs for Intel socket 775 and AMD socket

AM /754/939/940.

) Compatible with Slim Tower / Low Profile Home Theatre PC Enclosures.

3) 100% pure copper heatsink with aerodynamically optimized “tunnel” design for high performance

cooling.

4) Patented curved heatpipe design for heat transfer performance of up to 4 heatpipes using just .

5) Ultra-thin 0. mm fins for minimized weight and significantly reduced airflow resistance.

6) The 110mm fan inside the heatsink cools not only the CPU, but the VGA card, Northbridge, FET, and

RAM as well.

7) Does not generate noise or vibration in Silent Mode.

8) The adjustable fan speed controller (Fan Mate ) enables control of noise and fan performance.

2. Specifications

3. Explo e View

Fan

Clip Lever

Fan Support Fixing Screw

Clip

Fan Support

Base Cover

Fan Fixing Screw

Heatsink

Fan

Fan Mate 2

※

The specifications of any product may change without prior notice to improve performance.

1) Use and keep the product away from the reach of children.

) Check the components list and condition of the product before installation. If any problem is found,

contact your place of purchase to obtain a replacement.

3) Excessive force exerted on the fan may damage the fan, resulting in damage to the system.

4) Avoid inserting any objects into the fan while it is in operation.

5) Do not ingest or put the thermal grease into the mouth. If ingested, get medical attention.

Disclaimer)

Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not

limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper

installation, or improper testing.

Precautions

2) Components for Intel Socket 77

❾

Four (4) Clip Support Fixing Bolts

❿

One (1) Clip Support for Socket 775

󱆌

One (1) Backplate for Socket 775

3) Components for AMD Socket AM2/7 4/939/940

󳢬

No additional components

1) Common Components

❶

Cooler (CNPS8700 LED)

❷

Thermal Grease

❸

Fan Speed Controller (Fan Mate )

❹

Double-Sided Tape (for Fan Mate attachment)

❺

Cable for Fan Mate

❻

User’s Manual

❼Clip

❽Clip Lever

❽

❻

❶

❿

󱆌

❷

❾

󳣍Korean Patent Registration No. 10-0600448

󳣍Korean Design Registration No. 07-9753

󳣍Patent applications pending in over 0 nations around the world including the USA, EU, and Japan.

4. Patents

5. Components

❸❹❺

❼

※

The specifications of any product may change without prior notice to improve performance.

6. Compatible CPUs

7. Installation (Intel Socket 775)

1) All CPUs conforming to Intel Socket 77 platform

2) All CPUs conforming to AMD Socket AM2/7 4/939/940 platform

Caution)

No motherboard components such as the PSU, disk drives, VGA card, and RAM with a height

greater than 39mm should be present within a 61.5mm radius from the center of the CPU.

1) Clip Support Installation

Align the Clip Support for Socket 775(⑩) and the Backplate for Socket 775(⑪) with the mounting holes on the

motherboard and fasten them together with the Clip Support Fixing Bolts(⑨). The Lever Slot on the Clip Support

for Socket 775 should be properly oriented on the hinged side of the Socket Lever when installing.

※If the Lug of the Clip Support for Socket 775 interferes with any motherboard components, install the Clip

Support for Socket 775 with the Lug facing a different direction to avoid interference.

< Intel Socket 775 > < AMD Socket AM /754/939/940 >

Clip Support Fixing Bolt, ⑨

Clip Support for Socket 775, ⑩

Motherboard

Backplate for Socket 775, ⑪

Socket Lever Hinge

Socket Lever

Lever Slot

Lug

38mm

61.5mm

30mm

61.5mm

※

The specifications of any product may change without prior notice to improve performance.

4) Cooler Installation

Slide the Clip Lever(⑧) onto the Clip’s(⑦) Groove for Intel. Align and connect the Clip’s Lug Slot with the

Arrow Marked Lug on the Clip Support for Socket 775. Press onto the Clip Lever when aligning the Lever’s Slot

with the Lug. Make sure that the cooler is installed on the center of the CPU.

) Power Connection (Fan Mate 2 Connection)

◆Please refer to Fan Mate Installation and Usage on page 6.

2) Clip Installation

Insert the Clip(⑦) between the Heatpipes. Turn the Clip so that the central hole comes in alignment with the

Base Cover’s projecting part. Now attach the Clip so that its central hole slides over the projecting part of the

Base Cover. Do not exert any excessive force on the fan during the Clip installation. Excessive force on the fan

could lead to product damage.

3) Thermal Grease Application

Clear off particles or any residue from the top of the CPU then

spread a sufficient amount of the included Thermal Grease(②) on

top of the CPU.

Clip,⑦

Clip Lever,⑧

Clip’s Lug Slot

Arrow Marked Lug

Lug

Groove for AMD

Groove for Intel

※

The specifications of any product may change without prior notice to improve performance.

1) Clip Installation

Insert the Clip(⑦) between the Heatpipes. Turn the Clip so that the central hole comes in alignment with the

Base Cover’s projecting part. Now attach the Clip so that its central hole slides over the projecting part of the

Base Cover. Do not exert any excessive force on the fan during the Clip installation. Excessive force on the

fan could lead to product damage.

8. Installation (AMD Socket AM2/754/939/940)

3) Cooler Installation

Slide the Clip Lever(⑧) onto the Clip’s(⑦)Groove for AMD. Align and connect the Clip’s Lug Slot with the Lug

on the motherboard’s Retention Frame. Press onto the Clip Lever when aligning the Leve’s Slot with the Lug.

Make sure that the cooler is installed on the center of the CPU.

4) Power Connection (Fan Mate 2 Connection)

◆Please refer to Fan Mate Installation and Usage on page 6.

2) Thermal Grease Application

Clear off particles or any residue from the top of the CPU then

spread a sufficient amount of the included Thermal Grease(②) on

top of the CPU.

Clip,⑦

Clip Lever,⑧

Clip’s Lug Slot

Lug Lug

Groove for AMD

Groove for Intel

※

The specifications of any product may change without prior notice to improve performance.

9. FAN MATE 2 Installation an Usage

1) FAN MATE installation inside a System ) FAN MATE installation on the outside of a system

Connect the two 3-pin connectors of the

cable to the motherboard and to

CNPS8700’s Fan Connector as shown in

the diagram.

Pull the 6-Pin Connector out of the system

through the back and connect it to FAN

MATE , which should be installed on the

case using the included Double-sided tape.

◆The fan operates in Silent Mode when the speed control knob of FAN MATE is fully turned in the

counter-clockwise direction. The fan operates in Normal Mode when the speed control knob of FAN

MATE is fully turned in the clock-wise direction. The fan speed can be controlled according to user

preference by adjusting the speed control knob.

Note) FAN MATE has been specifically designed for the fan of this product.

Zalman Tech Co., Ltd. is not responsible for any damages to the system or CPU resulting

from its use with other types of fans.

10. Notes on Usage

1) Checking CPU Compatibility

Please refer to “Compatible CPUs”on page 3 to confirm that your CPU is compatible with

CNPS8700 before using it.

2) Cautions During Booting

The computer system may automatically shut down when booting the computer after the system

monitoring program outputs a warning stating that the CPU fan is rotating slowly. In such a case,

fully turn the speed control knob in the clockwise direction before rebooting to disable the ‘CPU Fan

Detected’ option in BIOS, or set the CPU fan’s rotational speed to 1,150rpm or lower in the system

monitoring program.

Note) Some motherboards fail to boot if the rotational speed of the CPU fan is below a certain rpm.

However, booting can be possible even at low fan rpm if the BIOS settings are updated. For

more information on updating your BIOS, please refer to the website of the motherboard

manufacturer. There are motherboards which fail to detect the rpm while operating the cooler

in Silent Mode, but this does not affect computing performance.

3) OVERCLOCKING

Zaman Tech Co., Ltd. is not responsible for any damages to the system and CPU resulting from

overclocking.

Fan Connector

(CNPS8700)

Motherboard

Double - sided Tape

Fan Mate

6-Pin Connector

※

The specifications of any product may change without prior notice to improve performance.

12.

Home Theatre PC Enclosures

The HD160XT is designed for ultra quiet home theatre

PC operation, utilizing optimized ventilation and

anti-vibration reinforcements, making it ideal for

environments that require silence such as living

rooms, bedrooms, educational facilities, and offices.

For more information, please visit our website.

Zalman's Noiseless Power Supplies, Fanless Northbridge Coolers, Heatpipe HDD Cooler, Noiseless

Case Fans, VGA Coolers, and Fan Controllers facilitate stable performance and a noiseless

computing environment.

11. Zalman Computer Noise Prevention Systems

Noiseless Power Supply Fanless Northbridge Cooler Heatpipe HDD Cooler

Noiseless Case Fan Ultra Quiet VGA Cooler Fan Controller

HD160XT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZALMAN Computerhardware Handbücher

ZALMAN

ZALMAN CNPS5100-Al Bedienungsanleitung

ZALMAN

ZALMAN Extreme Gaming VGA Cooler GV1000 Bedienungsanleitung

ZALMAN

ZALMAN CNPS7700 LED Bedienungsanleitung

ZALMAN

ZALMAN CNPS9800 MAX Bedienungsanleitung

ZALMAN

ZALMAN CNPS10X Quiet Bedienungsanleitung

ZALMAN

ZALMAN CNPS9X OPTIMA Bedienungsanleitung

ZALMAN

ZALMAN CNPS9500 AT Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000C-Cu Bedienungsanleitung

ZALMAN

ZALMAN CNPS9X OPTIMA Bedienungsanleitung

ZALMAN

ZALMAN RESERATOR1 Bedienungsanleitung

ZALMAN

ZALMAN ZM80D-HP Bedienungsanleitung

ZALMAN

ZALMAN CNPS6000-Al Bedienungsanleitung

ZALMAN

ZALMAN CNPS9700 LED Bedienungsanleitung

ZALMAN

ZALMAN CNPS9500 AM2 Bedienungsanleitung

ZALMAN

ZALMAN OPTIMA II CNPS10X Bedienungsanleitung

ZALMAN

ZALMAN CNPS7X Bedienungsanleitung

ZALMAN

ZALMAN CNPS20LQ Bedienungsanleitung

ZALMAN

ZALMAN VF900-Cu Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000A Series Bedienungsanleitung

ZALMAN

ZALMAN CNPS16X Bedienungsanleitung

ZALMAN

ZALMAN AMD Athlon 64 Socket 754 CPU Bedienungsanleitung

ZALMAN

ZALMAN FS-V7 Bedienungsanleitung

ZALMAN

ZALMAN CNPS20X Bedienungsanleitung

ZALMAN

ZALMAN ZM-2HC2 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung