ZKTeco PL10 Series Bedienungsanleitung

Installation Instruction

Version: 1.0

Date: Dec., 2014

PL10/ML10

Before Installation

Diagram

64mm 7 2mm

35mm 40mm

30mm 35mm

Mounting Hardware Package Mounting Hardware Package

39-46mm door thickness 47-54mm door thickness

Packing List

Door Preparation

Note: The standard lock includes 2 mounting hardware package only, which is used for the door

thickness of 39-46mm and 47-54 mm separately.

Note: Please refer the above picture to adjust the direction of strike plate F and latch D.

1. Check door thickness and prepare the mounting hardware

package.

2. Check door open direction.

30~38 56 20 10 25

39~46 64 30 10 35

47~54 72 35 10 40

55~60 80 45 10 50

M Screw Length

(mm)

L Screw Length

(mm)

Door Thickness

(mm)

H Spindle Length

(mm)

J Screw Length

(mm)

Left Inward Right inward

Left outward Right outward

70mm 60mm

3. Check the required backset (60mm or 70mm).

Note2: The latch has TWO backset options: 60mm or

70mm, please adjust it by yourself.

Note1: Installation template has the backset options

of both 60mm and 70mm.

60mm 70mm

60mm

2-3/42-3/8

2-3 /4

2-3/8

70mm

60mm

Hexagon Screw

Cautions

1. New lock is configured to grant ANY fingerprint access to unlock.

2. The lock is equipped with mechanical keys for manual unlocking. Remove mechanical keys from the

package and keep them in a safe place.

3. To power on the lock, four alkaline AA batteries (not included) are required. Non-alkaline and

rechargeable batteries ARE NOT RECOMMENDED.

4. Please avoid strong light direct to the fingerprint holder, otherwise the infrared sensor might be

disturbed.

5. The operation of setting lock has a stand-by time limit of 10 seconds; Without any activity, lock will shut

off after 10 seconds.

6. Keep your fingers clean when using this lock.

How To Use Mechanical Key And Change Handle Direction?

Note1: Align the template along the vertical center line of

the latch(D) at the desired handle height, and tape it

to the door.

Note2: Mark the holes first, then start drilling.

1.Drilling holes on the door. 2.Install the latch (D).

center line of the

handle

desired handle

height

Installation

Correct Position: T he small triangle

must be vertically upward.

This position is W rong !

3.Install outdoor unit(B) with gasket(C) and spindle(H) on the

door.

4.Install mounting plate (I) with gasket (C) on the door.

5.Install indoor unit (K).

Note : Push cable into the hole.

58mm

(2-9/32")

(35/64")

(1-3/8")

(5/64")

(15/32"

35mm

14mm

(1-9/64")

29mm

21mm

(53/64")

12mm

2mm

6.Install the battery.

7.Mark and drill holes for strike.

8.Testing the lock by rotating back handle and using mechanical

key(A).

Note : When the door is l ocked, the clutch is in idle position, the front

handle will be turned. However, the door will remain locked.

Andere Handbücher für PL10 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZKTeco Türschloss Handbücher

ZKTeco

ZKTeco TL300B Bedienungsanleitung

ZKTeco

ZKTeco ML10-ID Bedienungsanleitung

ZKTeco

ZKTeco TL100 Bedienungsanleitung

ZKTeco

ZKTeco ML10 Series Bedienungsanleitung

ZKTeco

ZKTeco ZL500 Bedienungsanleitung

ZKTeco

ZKTeco LH7500 Bedienungsanleitung

ZKTeco

ZKTeco AL-130 Series Bedienungsanleitung

ZKTeco

ZKTeco AL10DB Bedienungsanleitung

ZKTeco

ZKTeco LH4000 Bedienungsanleitung

ZKTeco

ZKTeco L4000 Bedienungsanleitung

ZKTeco

ZKTeco LH6500 Bedienungsanleitung

ZKTeco

ZKTeco ML10 Series Bedienungsanleitung

ZKTeco

ZKTeco AL30 Series Bedienungsanleitung

ZKTeco

ZKTeco LH3600 Bedienungsanleitung

ZKTeco

ZKTeco TL600 Bedienungsanleitung

ZKTeco

ZKTeco AL30 Series Bedienungsanleitung

ZKTeco

ZKTeco TL300Z Bedienungsanleitung

ZKTeco

ZKTeco AL10B Bedienungsanleitung

ZKTeco

ZKTeco ML300 Series Bedienungsanleitung

ZKTeco

ZKTeco ML200 Series Bedienungsanleitung

ZKTeco

ZKTeco HBL400 Bedienungsanleitung

ZKTeco

ZKTeco AL30Z Bedienungsanleitung

ZKTeco

ZKTeco TL100 Bedienungsanleitung

ZKTeco

ZKTeco AL20DB Bedienungsanleitung

Beliebte Türschloss Handbücher anderer Marken

Assa Abloy

Assa Abloy effeff 827A-IP Bedienungsanleitung

We.lock

We.lock SECBNEBL51 Bedienungsanleitung

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

JAKO

JAKO JKBTNX4 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung