ZKTeco ProCapture-WP Bedienungsanleitung

QUICK START GUIDE

Applicable Models: ProCapture-WP

Version: 1.0

Date: July, 2017

Safety Precautions

Before installation, please read the following safety precautions for user

safety and to prevent product damage.

Do not install the device in a place subject to direct sun light, humidity, dust

or soot.

Do not place a magnet near the product. Magnetic objects such as magnet,

CRT, TV, monitor or speaker may damage the device.

Do not place the device next to heating equipment.

Do not to let liquid like water, drinks or chemicals leak inside the device.

Do not let children touch the device without supervision.

Do not drop or damage the device.

Do not disassemble, repair or alter the device.

Do not use the device for any purpose other than those specified.

Clean the device often to remove dust on it. In cleaning, do not splash water

on the device but wipe it out with smooth cloth or towel.

Contact your supplier in case of a problem!

Device Overview

2.4-Inch Color Screen

Touch Keypad

Doorbell & LED Indicator

Fingerprint Sensor & Card

Reader Area

Reset Button

Front

Left Side

Back

Product Dimensions & Installation

Product Dimensions

Mounting the Device on Wall

7.96 in

(202.3 mm)

3.81 in

(96.8 mm)

1.38 in

(35mm)

7.34 in

(186.5 mm)

3.0 in

(76.1 mm)

Fix the back plate onto the wall using wall mounting screws.

Note: We recommend drilling the mounting plate screws into solid

wood (i.e. stud/beam). If a stud/beam cannot be found, use supplied

drywall plastic anchors.

Insert the device to back plate.Use security screws to fasten the

device to back plate.

0.51 in

(13 mm)

Power Connection

Without UPS

With UPS (Optional)

Recommended Power Supply

12V DC Adaptor

GND

+12V

12V DC Adaptor

12V±10%, at least 500MA.

To share the power with other devices, use a power supply with higher

current ratings.

Ethernet Connection

LAN Connection

Network Cable Adaptor

Ethernet Cable

Note: The device can be connected to PC directly by Ethernet cable.

RS485 Connection

RS485 Fingerprint Reader Connection

RS485 Fingerprint Reader

DIP Settings

1. There are six DIP switches on the back of RS485 fingerprint reader,

switches 1-4 are for RS485 address, switch 5 is reserved, switch 6 is for

reducing noise on long RS485 cable.

2. If RS485 fingerprint reader is powered from the terminal, the length of

wire should be less than 100 meters or 330 ft.

3. If the cable length is more than 200 meters or 600 ft., the number 6

switch should be ON as below.

Lock Relay Connection

Device Not Sharing Power with the Lock

COM1

+12V

GND

GND Sensor NC1

FR107

Diode

12V DC Adaptor

Normally Closed Lock

Notes:

1. The system supports NO LOCK and NC LOCK. For example the NO

LOCK (normally opened at power on) is connected with 'NO1' and

'COM1' terminals, and the NC LOCK (normally closed at power on) is

connected with 'NC1'and 'COM1' terminals.

2. When electrical lock is connected to the Access Control System, you

must parallel one FR107 diode (equipped in the package) to prevent

the self-inductance EMF from affecting the system.

Do not reverse the polarities.

Lock Relay Connection

Device Sharing Power with the Lock

COM1

+12V GND

Sensor NC1

FR107

Diode

Normally Closed Lock

GND

Wiegand Output Connection

WD0

WD1 GND

Inhaltsverzeichnis

Andere ZKTeco IP-Zugriffskontrollsysteme Handbücher

ZKTeco

ZKTeco IN710 Bedienungsanleitung

ZKTeco

ZKTeco F18 Bedienungsanleitung

ZKTeco

ZKTeco SpeedFace-V3L Bedienungsanleitung

ZKTeco

ZKTeco BioServer 2 Bedienungsanleitung

ZKTeco

ZKTeco X7 Bedienungsanleitung

ZKTeco

ZKTeco ZKX Series Bedienungsanleitung

ZKTeco

ZKTeco F18I Bedienungsanleitung

ZKTeco

ZKTeco MA500 Fehlerbehebungshandbuch

ZKTeco

ZKTeco VF Series Bedienungsanleitung

ZKTeco

ZKTeco F17 Bedienungsanleitung

ZKTeco

ZKTeco Notus Bedienungsanleitung

ZKTeco

ZKTeco FR1200 Datenblatt

ZKTeco

ZKTeco FaceKiosk-H10A Bedienungsanleitung

ZKTeco

ZKTeco ProFace X Series Bedienungsanleitung

ZKTeco

ZKTeco OP-200 Bedienungsanleitung

ZKTeco

ZKTeco MultiBio 700 Bedienungsanleitung

ZKTeco

ZKTeco X6 Merkblatt

ZKTeco

ZKTeco Atlas Bio Series Bedienungsanleitung

ZKTeco

ZKTeco ProlD Series Bedienungsanleitung

ZKTeco

ZKTeco SpeedFace-V5L Bedienungsanleitung

ZKTeco

ZKTeco SpeedFace-VSL Series Bedienungsanleitung

ZKTeco

ZKTeco ZKX5030A Bedienungsanleitung

ZKTeco

ZKTeco SCR-100 Plus Bedienungsanleitung

ZKTeco

ZKTeco ProBio Bedienungsanleitung

Beliebte IP-Zugriffskontrollsysteme Handbücher anderer Marken

Jantar

Jantar REX A-1-9 Bedienungsanleitung

2N Access Unit Merkblatt

Kedacom

Kedacom KSCA120 Series Bedienungsanleitung

H3C

H3C WX2880X Bedienungsanleitung

G4S

G4S S870-EX Leitfaden

PRASTEL

PRASTEL M2000PE Bedienungsanleitung

Allegion

Allegion interflex IF-281 Cylinder Bedienungsanleitung

TECOM

TECOM TS1067E Bedienungsanleitung

Fermax

Fermax Memokey 100C Benutzerhandbuch

Fermax

Fermax CITYLINE MEMOKEY Bedienungsanleitung

Software House

Software House iSTAR Pro 2U RM Bedienungsanleitung

AKCP

AKCP SP+ Bedienungsanleitung

Bpt

Bpt HNA/102 Bedienungsanleitung

Civintec

Civintec CV9601T-T-1F Bedienungsanleitung

BioMax

BioMax N-X90W Bedienungsanleitung

FingerTec

FingerTec s-Kadex Bedienungsanleitung

H3C

H3C WX5002ACCESSCONTROLLER Bedienungsanleitung

C Prox Ltd

C Prox Ltd DPN-2 Bedienungsanleitung