ZKTeco C3 Bedienungsanleitung

ZK Access Quick Start Guide





Install C3 using TCP/IPmode of communication

C3 controller supports the connection from panel to server over RS485 data line and also via

nodes on TCP/IP Ethernet networks. This greatly increases the flexibility of installation options.

Note: Make sure the devices are in the same LAN network with server or directly connect to the

server using the TCP/IP communication.

TCP/IP Connection Cable Mode

There are two ways to connect to C3 controller.

○

1Network cable directly connects Management host and the device, without a hub.

○

2In a large office a hub/switch is needed to connect more than 2 devices.

The configuration is as follows:



TCP/IP Communication

How to add a device into ZKAccess software?

ZKAccess provides two ways to add a device.

○

1When the IP address of the device is already known, you can quickly add it by entering

the IP address as follow:

Click [Add] on the [Device-Device] interface.

ZK Access Quick Start Guide





As the interface appears, write the [Device Name], then give the [IP address] of the device. The

[IP Port No.] is defaulted to 4370 by the system. Please set the password if needed.

Note: Select the type of the device. If it is a Four-Door-One-Way Access Control Panel there will

appear an extra option-[Switch to Two-door Two-way]. Select as appropriate according to

the actual device.

Select the [Area] the device belongs to. If you do not want to clear the data (Information in Time

zones, Access Levels, etc.) in the device when adding, remove the check beside the [Clear Data in

the Device when adding] option. Click [OK] to add the device.

○

2Click [SearchAccess Control Panels] option on the [Device-Device] interface.

Click [Search], after searching, the usable device will show in the results list. Modify the IP

address to available IP, and then add the device.





ZK Access Quick Start Guide





Using fast search tool to modify the IPaddress of a device

ZK provides a fast search tool for searching devices and modifying the IP addresses. This allows

devices to be added directly without modifying the system, which is inconvenient and time

consuming.

The tool and the operation of searching and modifying are as follows:

Click [Search Panel] on the [Setting] dropdown menu.

After a few seconds results for the usable devices will appear.

Click to select the device and [Modify IPAddress] on the [Setting] dropdown menu to modify the

IP address of the devices.

Inhaltsverzeichnis

Andere ZKTeco IP-Zugriffskontrollsysteme Handbücher

ZKTeco

ZKTeco X7 Bedienungsanleitung

ZKTeco

ZKTeco ProCapture-WP Bedienungsanleitung

ZKTeco

ZKTeco FaceDepot-7BL Bedienungsanleitung

ZKTeco

ZKTeco FA50 Bedienungsanleitung

ZKTeco

ZKTeco PA10 Bedienungsanleitung

ZKTeco

ZKTeco MultiBio 700 Bedienungsanleitung

ZKTeco

ZKTeco MB10-VL Bedienungsanleitung

ZKTeco

ZKTeco OP-200 Bedienungsanleitung

ZKTeco

ZKTeco ProMA Series Bedienungsanleitung

ZKTeco

ZKTeco EFace10 Bedienungsanleitung

ZKTeco

ZKTeco F18 Bedienungsanleitung

ZKTeco

ZKTeco SpeedFace-V3L Bedienungsanleitung

ZKTeco

ZKTeco F6 Bedienungsanleitung

ZKTeco

ZKTeco X8-BT Bedienungsanleitung

ZKTeco

ZKTeco C5S120 Bedienungsanleitung

ZKTeco

ZKTeco Aurora T1 Bedienungsanleitung

ZKTeco

ZKTeco SCR-100 Plus Bedienungsanleitung

ZKTeco

ZKTeco ProlD Series Bedienungsanleitung

ZKTeco

ZKTeco Ultima Series Bedienungsanleitung

ZKTeco

ZKTeco Green Label ProFace X Bedienungsanleitung

ZKTeco

ZKTeco KF1000 Series Bedienungsanleitung

ZKTeco

ZKTeco SpeedFace-VSL Series Bedienungsanleitung

ZKTeco

ZKTeco ZKX5030A Bedienungsanleitung

ZKTeco

ZKTeco F17 Bedienungsanleitung

Beliebte IP-Zugriffskontrollsysteme Handbücher anderer Marken

Jantar

Jantar REX A-1-9 Bedienungsanleitung

2N

2N Access Unit Merkblatt

Kedacom

Kedacom KSCA120 Series Bedienungsanleitung

H3C

H3C WX2880X Bedienungsanleitung

G4S

G4S S870-EX Leitfaden

PRASTEL

PRASTEL M2000PE Bedienungsanleitung

Allegion

Allegion interflex IF-281 Cylinder Bedienungsanleitung

TECOM

TECOM TS1067E Bedienungsanleitung

Fermax

Fermax Memokey 100C Benutzerhandbuch

Fermax

Fermax CITYLINE MEMOKEY Bedienungsanleitung

Software House

Software House iSTAR Pro 2U RM Bedienungsanleitung

AKCP

AKCP SP+ Bedienungsanleitung

Bpt

Bpt HNA/102 Bedienungsanleitung

Civintec

Civintec CV9601T-T-1F Bedienungsanleitung

BioMax

BioMax N-X90W Bedienungsanleitung

FingerTec

FingerTec s-Kadex Bedienungsanleitung

H3C

H3C WX5002ACCESSCONTROLLER Bedienungsanleitung

C Prox Ltd

C Prox Ltd DPN-2 Bedienungsanleitung