Zoom F8 Bedienungsanleitung
© 2019 ZOOM CORPORATION
Copying or reprinting this manual in part or in whole without permission is prohibited.
Product names, registered trademarks and company names in this document are the property of their respective companies.
All trademarks and registered trademarks in this document are for identication purposes only and are not intended to
infringe on the copyrights of their respective owners.
Proper display is not possible on grayscale devices.
Connecting with an UltraSync BLUE
02
Functions added in Version 6.0 / Contents
Functions added in Version 6.0
Starting with firmware version 6.0, the can connect via Bluetooth with an UltraSync BLUE made byTimecode Systems and receive time-
code from it. Using UltraSync BLUE as the timecode master, up to four supported devices can share timecode from one UltraSync BLUE.
This function cannot be used with the when first shipped from the factory.To use this function, a software extension file must be
downloaded from the ZOOM website (www.zoom.co.jp) and installed in the unit.
The has received radio law certification in Japan, the USA, Canada and Europe (EU). This function may not be used in other countries
and regions. Be aware that using it in countries where certification has not been received could result in legal penalties.
Contents
Functions added in Version 6.0 ...................................................................................................................................................................................... 02
Contents........................................................................................................................................................................................................................... 02
Connecting with an UltraSync BLUE............................................................................................................................................................................. 03
Disconnecting with the UltraSync BLUE....................................................................................................................................................................... 04
Connecting with a different UltraSync BLUE................................................................................................................................................................ 05
Connecting with an UltraSync BLUE
03
F8 Multi Track Field Recorder
Connecting with an UltraSync BLUE
1. When the HOME screen is open, press and hold .
2. Use to select
Yes
, and
press .
3. Use to select
Timecode
,
and press .
“Searching ...” will appear on the display as the unit starts
searching for a device to connect.
HINT
• Searching can be canceled by pressing .
• If searching has been canceled, it can be restarted by selecting
“Pair” on the “Timecode” screen.
4. On the UltraSync BLUE, select the as the device
to connect.
When pairing (registration) completes, “Connected.” will ap-
pear on the display.
UltraSync BLUE Timecode
HINT
• See the UltraSync BLUE operation manual for information about
how to select the device to connect.
• Use the and the UltraSync BLUE as close together as
possible to make communication more reliable.
• Even if communication with the UltraSync BLUE is interrupted
during recording, timecode counted by the will be written
to the recording file.
When the is connected to an UltraSync BLUE, it can receive timecode from the UltraSync BLUE and write it to recording files.
Disconnecting with the UltraSync BLUE
04
Disconnecting with the UltraSync BLUE
disconnection.
1. When the HOME screen is open, press and hold .
2. Use to select
Yes
, and
press .
“Disconnected.” will appear, showing that disconnection has
occurred.
Disconnecting the and the UltraSync BLUE will stop timecode recording. Pairing records will be retained even after
Connecting with a different UltraSync BLUE
05
F8 Multi Track Field Recorder
Connecting with a different UltraSync BLUE
1. Press .
This opens the Menu screen.
2. Use to select
TIMECODE
,
and press .
3. Use to select
Timecode
,
and press .
4. Use to select
Forget
,
and press .
4. Use to select
Pair
, and
press .
“Searching ...” will appear on the
display as the unit starts search-
ing for a device to connect.
HINT
• Searching can be canceled by pressing .
• If searching has been canceled, it can be restarted by selecting
“Pair” on the “Timecode” screen.
6. On the other UltraSync BLUE, select the as the
device to connect.
When pairing (registration) completes, “Connected.” will ap-
pear on the display.
HINT
• See the UltraSync BLUE operation manual for information about
how to select the device to connect.
• Use the and the UltraSync BLUE as close together as pos-
sible to make communication more reliable.
• Even if communication with the UltraSync BLUE is interrupted
during recording, timecode counted by the will be written
to the recording file.
To receive timecode from an UltraSync BLUE other than the one connected to the , the current UltraSync BLUE pairing (reg-
istration) must be forgotten and pairing with the other one must be conducted.
Z2I-3757-01
ZOOM CORPORATION
4-4-3 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 Japan
www.zoom.co.jp
Andere Handbücher für F8
5
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Zoom Messgerät Handbücher
Zoom
Zoom H1essential Bedienungsanleitung
Zoom
Zoom F2 Bedienungsanleitung
Zoom
Zoom R4 Bedienungsanleitung
Zoom
Zoom F4 Anleitungen und Rezepte
Zoom
Zoom H5 Bedienungsanleitung
Zoom
Zoom F8n Pro Anleitungen und Rezepte
Zoom
Zoom H4n Pro Bedienungsanleitung
Zoom
Zoom H6 Handy Recorder Bedienungsanleitung
Zoom
Zoom F3 Bedienungsanleitung
Zoom
Zoom MicTrak M3 Bedienungsanleitung
Zoom
Zoom F6 Montageanleitung
Zoom
Zoom F8 Anleitungen und Rezepte
Zoom
Zoom H1n-VP Bedienungsanleitung
Zoom
Zoom H4N Bedienungsanleitung
Zoom
Zoom F8n Pro Bedienungsanleitung
Zoom
Zoom H4essential Bedienungsanleitung
Zoom
Zoom Handy Recorder H8 Montageanleitung
Zoom
Zoom F2 Bedienungsanleitung
Zoom
Zoom H4N Bedienungsanleitung
Zoom
Zoom Handy REcorder H1 Installationsanleitung
