Zte MF668A Bedienungsanleitung

ZTE MF668A HSPA+ USB Modem

User Manual

Contents

1 Modem Introduction........................................................4

1.1 Introduction ..........................................................................................4

1.2 Warning and Notice..............................................................................4

1.3 Applicability Scope...............................................................................6

1.4 System requirements...........................................................................6

1.5 Functions..............................................................................................7

1.6 Specification.........................................................................................7

2 Installation........................................................................8

2.1 Outline and Parts .................................................................................8

2.2 Hardware Installation ...........................................................................8

2.3 Software Installation...........................................................................10

2.4 Run the Application Software.............................................................14

2.5 Hardware Uninstall.............................................................................15

2.6 Software Uninstall..............................................................................15

3 Functions & Operation..................................................18

3.1 Interface introduction..........................................................................18

3.1.1 Main Interface.........................................................................18

3.1.2 Description of Mini Icons.........................................................19

3.2 Connecting to the Internet..................................................................20

3.3 SMS....................................................................................................21

3.3.1 Check SMS.............................................................................22

3.3.2 Create a new message...........................................................23

3.3.3 The SMS box operating guide................................................25

3.4 Phonebook.........................................................................................25

3.5 Settings ..............................................................................................27

3.5.1 Connection settings ................................................................28

3.5.2 Selection settings....................................................................30

3.5.3 Preference settings.................................................................30

3.5.4 SMS Settings..........................................................................31

3.5.5 Sound settings........................................................................32

3.5.6 Security settings......................................................................32

3.5.7 System settings.......................................................................33

3.5.8 Update settings.......................................................................33

3.6 Data record ........................................................................................34

3.7 MicroSD card .....................................................................................34

3.8 Help....................................................................................................34

4 FAQ .................................................................................35

1 Modem Introduction

1.1 Introduction

Thank you for purchasing ZTE MF668A HSPA+ USB Modem.

To guarantee that the modem is always in its best condition, please read this

manual carefully and keep it for further use.

The pictures, symbols and contents in this manual are just for your reference.

They might not be completely identical with your modem. ZTE operates a policy

of continuous development and reserves the right to update the technical

specifications in this document at any time without prior notice.

The ZTE MF668A HSPA+ USB Modem is a type of multi-mode, 3G modem,

suitable for GSM/GPRS/EDGE/UMTS/HSDPA/HSUPA/HSPA+ networks. With a

USB interface connecting to a laptop or a desktop PC, it integrates the

functionality of a modem and a mobile phone (SMS and phonebook), combining

mobile communication with internet perfectly. While connected to the mobile

network, it can help you get SMS, data service and will help you break away

from the limit of time and space, and realize wireless communication at any

moment everywhere.

1.2 Warning and Notice

To the owner

The use of electronic transmitting devices is forbidden in aircraft, at petrol

stations and in hospitals. Please observe and obey all warning signs and

switch off your modem in these conditions.

Operating USB modem may interfere with medical devices like hearing aides

and pacemakers.

Be aware of warning signs in places such as oil refineries or chemical

factories where there are explosive gases or explosive products being

processed.

Store the USB modem out of the reach of children. The USB modem may

cause injury if used as a toy or may be damaged by rough play or moisture.

Do not open the cover and touch the metallic (U)SIM bracket when the

modem is working. Otherwise, you may get a burn.

Modem

The USB modem must only be used with a PC that is certified to IEC 60950-1

(or equivalent) or a PC that has a power supply that is certified to IEC

60950-1 (or equivalent) or a PC that is powered by an internal battery and

that has no connection to mains power.

Only use original accessories supplied by the manufacturer. Using

unauthorised accessories may invalidate your warranty.

Avoid using the USB modem near or inside metallic structures or

establishments that can emit electromagnetic waves.

The USB modem is not waterproof. Please keep it dry and store it in a cool

place out of direct sunlight.

Handle the USB modem with care. Don’t drop, bend, knock or treat it harshly

to avoid damage to the unit.

There are no user serviceable parts. Dismantling the unit will invalidate the

warranty.

Operating temperature range of -10℃～+60℃and humidity 5%~95% are

recommended.

Health and safety information

Radio Frequency (RF) Energy

This model phone meets the government’s requirements for exposure to radio waves.

This phone is designed and manufactured not to exceed the emission limits for

exposure to radio frequency (RF) energy set by the Federal Communications

Commission of the U.S. Government:

The exposure standard for wireless USB modem employs a unit of measurement

known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is

1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted

by the FCC with the phone transmitting at its highest certified power level in all tested

frequency bands. Although the SAR is determined at the highest certified power

level, the actual SAR level of the phone while operating can be well below the

maximum value. This is because the phone is designed to operate at multiple power

levels so as to use only the poser required to reach the network. In general, the

closer you are to a wireless base station antenna, the lower the power output.

The highest SAR value for the USB modem as reported to the FCC when tested for

use at body is 1.18 W/kg.

While there may be differences between the SAR levels of various phones and at

various positions, they all meet the government requirement.

The FCC has granted an Equipment Authorization for this model phone with all

reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.

SAR information on this model phone is on file with the FCC and can be found under

the Display Grant section of http://www.fcc.gov/oet/fccid after searching on

FCC ID: Q78-MF668A

FCC Compliance （only Part 15B）

This device complies with part 15 of the FCC Rules. Operation is subject to the

condition that this device does not cause harmful interference.

Caution: Changes or modifications not expressly approved by the manufacturer

could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

—Consult the dealer or an experienced radio/ TV technician for help.

1.3 Applicability Scope

ZTE MF668A HSPA+ USB Modem supports the present mainstream types of

laptops and desktop PCs, such as HP, IBM, Toshiba, Lenovo, Dell, Sony, Apple,

etc.

1.4 System requirements

Operating System: Windows XP, Vista, Windows 7, MAC OS

Configuration (Recommended):

CPU 1GHz Pentium or above

Hard Disk 20MB or above

RAM 512MB or above

The performance of the modem may be influenced if configuration is below the

recommendation.

1.5 Functions

SMS service, data service, application management, microSD card supported,

etc.

1.6 Specification

Interface Type USB 2.0 high speed

Systems supported Supports most types of laptop and desktop PC.

Operating systems Windows XP, Vista, Windows 7, MAC OS

Functions SMS service, Data service, Applications

management, support microSD card, etc.

Network Standards HSPA+/HSUPA/HSDPA

/UMTS/EDGE/GPRS/GSM

Frequency band HSDPA /UMTS: 2100MHz

GSM/GPRS/EDGE: 1800/900MHz

Transmission

(Max. data rate) HSPA+: 21.6Mbps DL

5.76Mbps UL

Temperature Storage: -40℃～+80℃

Operation: -10℃～+60℃

Dimension 76.77mm×28.0mm×11.92mm

Weight About 30g

MicroSD Capability Up to 8G

2 Installation

2.1 Outline and Parts

1. Back cover

2. LED Indicator

3. Rotating USB connector

4. External antenna port

2.2 Hardware Installation

1. Insert the SIM/USIM card into the USB Modem

Your SIM/USIM card stores your service details, phonebook and text messages.

You can obtain it from a mobile phone service provider when you sign on as a

subscriber.

To install SIM/USIM card

Remove the back cover on the modem.

Hold your SIM/USIM card with the cut corner oriented as shown and then

slide it into the card holder with the metal contacts facing the modem.

Remove the back cover Slide the card into place

Replace the back cover.

To remove SIM/USIM card from the USB modem

Remove the modem from the computer.

Remove the back cover.

Pull out the SIM/USIM card from the card holder.

Pull out the card Replace the back cover

2. Install memory card

You can use a compatible microSD card to save more data. Only microSD card

is supported by the modem and do not insert other memory card into the

modem.

Remove the back cover of the USB modem.

Insert the microSD card into the holder until you hear a click. Make sure

that the memory card is orientated as shown in the following picture.

Replace the back cover.

The driver of the microSD card will be installed automatically when the modem

driver is installed.

3. Connect the USB modem to your PC

Plug the modem to the USB port of your computer. Make sure that it is

tightly inserted.

Your PC system will automatically detect and recognize the new hardware

and display a new icon in the desktop taskbar, indicating that the computer

and the USB modem have been connected properly.

If you are using Windows XP, Vista, Windows 7 or Mac OS X system, the

installation program will start automatically after a few seconds.

2.3 Software Installation

If your laptop or destop PC supports automatic installation, the following

installation interface will appear on the screen a few seconds after your PC

recognizes the new hardware.

If your PC doesn’t support automatic installation, start the installation program by

running the Install.exe from the new CD-ROM drive in My Computer or

Computer. The following installation interface will show how to start installation.

Inhaltsverzeichnis

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung

Aztech

Aztech HW831 Bedienungsanleitung