ZyXEL Communications WPA-1000 Bedienungsanleitung

WPA-1000

802.11g Wireless Projector Adapter

Quick Start Guide

Version 2.00

10/2007

Edition 1

DEFAULT SETTINGS

IP Address http://192.168.1.10

Passwords

Conference

Control

Host

1234

Admin 1234

SSID ZyXEL

WPA-1000 Quick Start Guide

WPA-1000 Overview

The WPA-1000 allows meeting participants to access and share one projector via wireless

connection to the WPA-1000, as shown in the figure below. IEEE 802.11b/g standards are

supported and wireless connections can be secured with WEP security.

This Quick Start Guide shows how to connect to the WPA-1000 with an Ethernet cable in

order to access it and first enable wireless security. This is recommended as the wireless

connection is not secure by default, so people in adjacent rooms may be able to view your

presentation. After you configure wireless security, everyone who knows the security

settings can connect wirelessly to the WPA-1000 and use the WPA-1000 to display their

presentation.

"See your User’s Guide on the CD in the package for more information on all

features.

To read the User’s Guide, insert the CD that came in the box into your CD-ROM drive. A

screen should pop up. Navigate to the User’s Guide from this screen. If a screen does not

pop up, open Windows Explorer (click My Computer), click on the CD-ROM drive (usually

drive D:) and navigate to it from there.

What You Have To Do

1Make hardware connections

2Note information in the standby screen

3Configure wireless security

4Connect wirelessly to the WPA-1000

5Install the WPA-1000 utility

WPA-1000 Quick Start Guide

6Start sharing projections

What Your Computer Should Have

• Intel Pentium III 800MHz or faster processor

• 256 MB RAM required; 512 MB, or more recommended

• 10 MB free hard-disk space

• Microsoft Windows 2000 Service Pack 4 or later, Windows XP Service Pack 2 or later, or

Windows Vista 32 bit

• Microsoft Internet Explorer 6.0 or 7.0 (recommended); Firefox 1.5 or 2.0

• Ethernet adapter for direct Ethernet connection to the WPA-1000

• IEEE 802.11b/g wireless adapter for wireless connection to the WPA-1000

1 Make Hardware Connections

1Connect your computer to the LAN port using the red Ethernet cable that came with the

package or any other cross-over Ethernet cable.

2Connect the projector to the WPA-1000's VGA socket with the gray VGA cable that

came with the package.

3Use the power adapter from the package to connect your WPA-1000’s power socket to

a power source.

4Press the ON/OFF button in to turn your device on.

VI cannot start my WPA-1000

• Check the POWER is turned on.

• Check the WPA-1000 is connected to a power source and the power source is turned on.

POWER ON|OFF VGA RESET LAN

WPA-1000 Quick Start Guide

• Restart your device.

5Look at the LEDs (lights) on the front panel of the WPA-1000.

•TheSTATUS LED is orange while the WPA-1000 is starting up, and green when it is ready.

•TheLAN LED is steady green when it has a successful connection to your computer; it

blinks while sending/receiving data.

VI cannot make a LAN connection to the WPA-1000 from my computer.

• Check the cables are connected properly and you are using the red Ethernet cable that

came in the package or an auto-crossover Ethernet cable.

• Check your computer is set to obtain IP addresses automatically. See the User’s Guide for

details on how to check this setting.

WPA-1000 Quick Start Guide

2 Note Information In The Standby Screen

The next screen appears on your projector screen when your WPA-1000 is successfully

connected to the projector. It contains important information that you should write down.

You will need this information later.

LABEL DESCRIPTION VALUE

projection sharing utility.

SSID This is the name that identifies the WPA-1000 in your

wireless network. Computers must use the same SSID,

channel and WEP as the WPA-1000 in order to connect

wirelessly to it. ZyXEL is the default SSID. It is highly

recommended you change this to a more specific name,

especially if you have other ZyXEL wireless devices in your

network.

Server IP This is the IP address of the WPA-1000. 192.168.1.10 is

the default IP address. If the WPA-1000 is connected to

your network and is set to receive an IP address

automatically, then it will show the IP address it received

here. This IP address is also displayed as the IP Address

in the Status screen.

This is the IP address you use to access the WPA-1000

web configurator.

WPA-1000 Quick Start Guide

VThe standby screen does not appear.

• Check the projector is turned on and working properly.

• Check your gray VGA cable is securely attached to the WPA-1000 and to the projector.

3 Configure Wireless Security on the WPA-1000

By default, the WPA-1000 has no wireless security. It is important to set up security on your

wireless network before meeting participants connect wirelessly.

1Open an Internet browser such as Internet Explorer on your computer.

2Type the Server IP address displayed in the standby screen in the web address field of

your Internet browser (the default IP address is 192.168.1.10). Press [ENTER].

3Click Administrator in the screen below.

Channel This is the wireless channel that the WPA-1000 is using.

WEP This shows WPA-1000 wireless network security settings.

Disable means you have san unsecured wireless network.

LABEL DESCRIPTION VALUE

WPA-1000 Quick Start Guide

4Type the default administrator password, ‘1234’.

5Click Network.

6You just want to configure wireless security settings in this screen now. See the User’s

Guide for more information on these and other fields in this screen.

WPA-1000 Quick Start Guide

Configure these wireless settings.

"Computers must use the same SSID, channel and WEP as the WPA-1000

in order to connect wirelessly to it. Write down this information for meeting

participants to use when connecting to the WPA-1000.

7Click Apply. You are then prompted to restart the WPA-1000.

8Restart the WPA-1000 to save the changes.

"The Login Code in the standby screen changes each time the WPA-1000

is started.

LABEL DESCRIPTION

SSID Type a name to identify this WPA-1000 in your wireless network list.

ZyXEL is the default SSID. It is highly recommended you change this to a

more specific name, especially if you have other ZyXEL wireless devices in

your network.

Channel If there are other access points nearby, select the channel least in use.

Otherwise, leave it at the default setting

WEP Select 64bit (ASCII 5 chars) - this is the minimum wireless security with

just a five-character password. For stronger security, select one of the

other options from this list box.

Key For 64bit (ASCII 5 chars) WEP, type a key consisting of five letters (a - z,

A - Z) and numbers (0 -9). If you selected a stronger WEP, then make sure

to enter a key of the exact length and character type as indicated in the

WEP field.

WPA-1000 Quick Start Guide

4 Connect Wirelessly To The WPA-1000

1Follow this step if your wireless adapter is NOT already enabled on your computer.

Open Network Connections, right-click your wireless adapter and click Enable. The

following example screen shot is from a Windows XP computer.

2Your enabled wireless adapter icon appears in the bottom right of your computer

monitor. Right-click it and click View Available Wireless Networks. Select the SSID

name you gave the WPA-1000 and click Connect.

3You are prompted to enter a password. Enter the exact same password as the WEP

Key you configured on the WPA-1000 and click Connect.

WPA-1000 Quick Start Guide

4Click Unblock if you get a Windows Firewall warning screen.

5You should now be securely connected wirelessly to the WPA-1000.

6Your enabled wireless adapter icon in the bottom right of your computer monitor shows

that you are connected to the WPA-1000.

7Check the WLAN LED on your device. If it shows green the WPA-1000 has a

successful wireless connection. If it is green and blinks it is sending /receiving data. If it

is off, your device has no wireless connection.

VI cannot connect wirelessly to the WPA-1000.

• Scan the available wireless networks again with your wireless adapter management utility.

• Check you have set the exact same SSID, channel, encryption type (WEP),and Key

on your computer as the WPA-1000.

Andere Handbücher für WPA-1000

Inhaltsverzeichnis

Andere ZyXEL Communications Adapter Handbücher

ZyXEL Communications

ZyXEL Communications NWD2205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications N220 - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WPA-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-470 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4211 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Powerline Ethernet Multiplug Center PLA491 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2024 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-202 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Omni TA128 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-220 V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD-271N - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AG-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD2205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-401 v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-405 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA6457 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GN600 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD7605 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-402 V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL NWD2105 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL NWD2105 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AG-120 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung