ZyXEL Communications P-660H Series Bedienungsanleitung

P-660H Series

ADSL2+ 4-port Security Gateway

Quick Start Guide

Version 3.40

6/2005

P-660H Series Quick Start Guide

Overview

The P-660H is an ADSL Internet gateway with a 4-port built-in

switch. You may need your Internet access information. The P-

660H is referred to as “the Prestige” in this guide.

See your User’s Guide for background information on all features.

This guide is divided into the following sections.

1 Hardware Connections

You need the following before you start.

1Hardware Connections

2Configuration for Internet Access

3NAT

4Firewall

5Troubleshooting

Prestige Computer(s) Ethernet Cable Telephone Cable Power Adaptor

P-660H Series Quick Start Guide

1DSL: Connect the Prestige to a telephone jack using a telephone wire.

2LAN: Use an Ethernet cable to connect a computer to a LAN 10/100M port for initial configuration and/or

Internet access.

3POWER: Use the included power adaptor to connect the POWER socket to an appropriate power source

(see the User’s Guide for power adaptors specifications by region).

After you’ve made the connections, push in the power button to turn on the Prestige. Look at the front panel

LEDs. The PWR/SYS LED blinks while performing system testing. The PWR/SYS then turn steady on if the

testing is successful. The LAN LED turns on if the LAN port is properly connected.

2 Configuration for Internet Access

You may configure the Prestige for Internet access in any one of these ways:

• Zero Configuration

• Web Configurator Internet Access Wizard

P-660H Series Quick Start Guide

2.1 Zero Configuration

Launch your web browser and

navigate to any web site (for

example, www.zyxel.com). The

Prestige automatically detects

and configures your Internet

connection. This may take about

two minutes.

If you have a PPPoE or PPPoA

connection, a screen displays

prompting you to enter your

Internet account information. Enter the username, password and/or service name exactly as provided. Click

Apply.

2.2 Accessing the Web Configurator

1Launch your web browser. Enter “192.168.1.1” as the

web site address.

Note: If you do not see the next screen, then please

read Section 5.1 on page 9

2Click Login. 3Type a new

password

(retype it to

confirm) and

click Apply.

Otherwise click

Ignore. You

then see the

main web

configurator

screen

P-660H Series Quick Start Guide

4In the MAIN MENU screen, click WIZARD SETUP.

2.2.1 Internet Access Setup

Note: Enter the Internet access information given to you by your ISP exactly in each wizard screen and

then click Next to continue or click Back to return to the previous screen.

Screen information is not saved when you click Back.

1From the Mode drop-down list box, select Routing (default) if you want to use routing features such as

NAT.

P-660H Series Quick Start Guide

2The next wizard screen varies depending on the Encapsulation you chose in the first wizard screen. From

the Network Address Translation drop-down list box, select SUA Only if you have one public IP address,

Full Feature if you have more than one public IP address (for translation) or None to disable NAT.

Note: You will only see the next two screens in Routing mode.

•PPPoE.

Select Connect

on Demand

when you don't

want the

connection up

all the time and

specify an idle

time-out period

(in seconds) in

the Max. Idle

Timeout field.

Select Nailed-

Up Connection when you want your connection up all

the time. The Prestige will try to bring up the

connection automatically if it is disconnected.

•ENET

ENCAP

• PPPoA • RFC1483

P-660H Series Quick Start Guide

3 NAT

NAT (Network Address Translation - NAT, RFC 1631) means the translation of an IP address in one network to

a different IP address in another. For example, you could translate one public IP address to multiple private IP

addresses on your LAN (SUA Only).

3Verify your

LAN and

WAN

settings.

To change the

LAN settings,

click Change

LAN

Configuration;

otherwise click

Save Settings to

save the

configuration

and go to the

final wizard

screen.If you

change the

Prestige’s LAN IP address, you must use the new IP

address if you want to access the web configurator

again.

4Click Save Settings in the screen shown in step

3 to go to the final wizard screen.The Prestige

automatically tests the connection to the

computer(s) connected to the LAN port. To test

the connection from the Prestige to the ISP, click

Start Diagnose. Otherwise click Return to Main

Menu to go back to the main screen.

Click

Advanced

Setup and

then NAT to

open the

NAT-Mode

screen.

Select SUA

Only if you

have one public IP address and Full Feature if

you have multiple public IP addresses (for

address translation).

If you have

servers on your

LAN, configure

an SUA server

set to have

them visible to

the outside.

From the NAT -

Mode screen

click Edit

Details and fill

in the fields as

shown.

P-660H Series Quick Start Guide

4 Firewall

The firewall is already enabled by default on the Prestige.

5 Troubleshooting

Click Advanced Setup and

then Firewall to open the

firewall screen. The firewall

protects your LAN from

attacks from the Internet. No

traffic can enter your LAN

unless a request was

generated on the LAN first.

Click Default

Policy to see

rule direction

information.

You can also

disable the

firewall here

if you want.

PROBLEM CORRECTIVE ACTION

None of the LEDs turn on when

you connect the Prestige’s

power.

Make sure that you have the correct power adaptor connected to the Prestige, it

is plugged into an appropriate power source and the Prestige is turned on.

Check all cable connections. If the LEDs still do not turn on, you may have a

hardware problem. In this case, you should contact your local vendor.

Cannot access the Prestige

from my computer.

Check the cable connection from your computer to the Prestige.

Make sure your computer’s IP address is in the same subnet as the Prestige’s

IP address (see Section 5.1 on page 9).

Ping the Prestige from a computer on the LAN. Make sure your computer’s

Ethernet adapter is installed and functioning properly. In the computer, click

Start, (All) Programs, Accessories and then Command Prompt. In the

Command Prompt window, type "ping" followed by the Prestige’s LAN IP

address (192.168.1.1 is the default) and then press [ENTER]. The Prestige

should reply; otherwise see Section 5.1 on page 9.

If the Prestige’s IP address has changed, then enter the new one as the URL.

Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later with

JavaScript enabled.

Make sure you enter the password correctly (the field is case sensitive).

If you’ve forgotten the Prestige’s password, use the RESET button. Press the

button in for about 10 seconds (or until the PWR/SYS LED starts to blink), then

release it. It returns the Prestige to the factory defaults (password is 1234, LAN

IP address 192.168.1.1 etc.; see your User’s Guide for details).

P-660H Series Quick Start Guide

5.1 Set Up Your Computer’s IP Address

This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address.

This ensures that your computer can communicate with your Prestige. Refer to your User’s Guide for detailed

IP address configuration for other Windows and Macintosh computer operating systems.

1In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.

2In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up

Connections.

3Right-click Local Area Connection and then click Properties.

4Select Internet Protocol (TCP/IP) (under the General tab in

Windows XP) and click Properties.

5The Internet Protocol TCP/IP Properties screen opens (the

General tab in Windows XP).

6Select the Obtain an IP address automatically and Obtain

DNS server address automatically options.

7Click OK to close the Internet Protocol (TCP/IP) Properties

window.

8Click Close (OK in Windows 2000/NT) to close the Local Area

Connection Properties window.

9Close the Network Connections screen.

5.2 Viewing Your Product’s Certifications

1Go to www.zyxel.com.

2Select your product from the drop-down list box on the ZyXEL

home page to go to that product's page.

3Select the certification you wish to view from this page.

Cannot access the Internet. Verify the Internet connection settings in the wizard. Make sure you have

entered the correct user name and password if you are using PPPoE or

PPPoA.

PROBLEM CORRECTIVE ACTION

Andere Handbücher für P-660H Series

Inhaltsverzeichnis

Andere ZyXEL Communications Tor Handbücher

ZyXEL Communications

ZyXEL Communications ZYWALL - CLI Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG3925-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway... Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG1312-BX0D Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG4380-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 5 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications p-661hw series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HN-T1A Handbuch

ZyXEL Communications

ZyXEL Communications ZyWALL 1050 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL USG-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 971M Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 5 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HW-I1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3301 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-T - V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-792H Referenzhandbuch

ZyXEL Communications

ZyXEL Communications Unified Security Gateway ZyWALL 300 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-510S Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660H-61 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EMG8726-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EMG2881-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660H-Tx v2 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-4100 v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications SBG3500-N000 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt