ZyXEL Communications P-202H Plus v2 Bedienungsanleitung

P-202H Plus v2

ISDN Internet Access Router

Quick Start Guide

Version 3.40

6/2006

Edition 1

P-202H Plus v2 Quick Start Guide

Overview

The P-202H Plus v2 is an ISDN router with a four-port built-in switch. It is equipped with two integrated phone

ports for connecting analog phones and/or fax devices. It also provides advanced calling features, such as call

waiting, three-way calling, call transferring and forwarding.

See your User’s Guide for background information on all features.

1 Requirements

Make sure you have the following things before you set up your P-202H Plus v2.

• Internet access - account information provided by your ISP, such as user name, password, and so on.

• Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with JavaScript enabled.

2 Hardware Connections

1PHONE1-2: Use a telephone cable (and any telephone adaptors provided with your P-202H Plus v2) to

connect your telephones to these ports. If you only have one telephone, you should only use one port.

2ISDN: Use the included ISDN cable to connect your P-202H Plus v2’s ISDN port to the ISDN wall jack.

3ETHERNET: Use an Ethernet cable to connect a computer to the ETHERNET port for initial configuration

and/or Internet access.

P-202H Plus v2 Quick Start Guide

4POWER: Use the power adaptor provided with your P-202H Plus v2 to connect an appropriate power

source to this port. Make sure the power source is on.

5Push in the POWER button. Look at the LEDs on the front panel.

•ThePOWER LED blinks while your P-202H Plus v2 starts up and stays on once the system is ready.

•TheISDN and ETHERNET LEDs stay on if the corresponding port is properly connected and blinks when there

is traffic.

If any of these LEDs are not on, check your connections, and inspect your cables for damage. If the LEDs are

still off, contact your local vendor.

3 Initial Configuration

1Open your web browser, and go to http://192.168.1.1.

2The login screen displays. Enter the password (“1234” is the default) and click Login.

Note: If the login screen does not display, check your browser’s security settings (see

Troubleshooting for details) or make sure your computer is set to receive an IP address

dynamically (see Set Up Your Computer’s IP Address).

3Type a new password, re-type it to confirm, and click Apply. (The next time you log in, you should not see

this screen.

4You should now see the Site Map screen.

P-202H Plus v2 Quick Start Guide

5Click Wizard Setup in the main menu to display the first wizard screen.

6Use this screen to configure your ISDN

line and how the P-202H Plus v2

handles incoming calls.

Select from the B Channel Usage

dropdown box. If you are using both B

channes, select Switch/Switch (default).

If you are only using one B channel (for

example, your router is sharing the ISDN

line with another device), then select

Switch/Unused. If your second B

channel is a leased line, select Switch/

Leased.

In ISDN Data, enter the phone number

(up to 25 digits) assigned to you by your

ISDN service provider. If it's necessary to

dial an additional number to reach an

outside line, enter it in the Outside Line

Prefix field.

Enter the subaddress and telephone

number assigned to A/B Adapter 1 or 2

(PHONE 1 or 2).

The Incoming Phone Number Matching setting governs how incoming calls are routed.

If you select Multiple Subscriber Number (MSN) or Called Party Subaddress, a call (either ISDN data or

analog) is routed to the port that matches the dialed number; if no match is found, the call is dropped. Global

calls are always ignored. A global call is an incoming analog call where the switch did not send the dialed

number. This happens most often when the call originates from an analog telephone line.

P-202H Plus v2 Quick Start Guide

If you select Don't Care, then all data calls are routed to the P-202H Plus v2 itself. Analog calls, however, are

routed to either A/B adapter 1 or 2, or simply ignored, depending on the Analog Call Routing field. If

Incoming Phone Number Matching is Don't Care and Analog Call Routing is either A/B Adapter 1, A/B

Adapter 2 or Both, then the P-202H Plus v2 uses Global Analog Call to decide how to handle global calls. If

you set Global Analog Call to Accept, then global calls are routed to the port according to the Analog Call

Routing setting; if you set Global Analog Call to Ignore, then the P-202H Plus v2 ignores all global calls. If

Analog Call Routing is Ignore to begin with, then all analog calls, including global calls, are ignored.

Click Next to continue.

7The second wizard screen helps you

set up your P-202H Plus v2 for Internet

access.

In the Service Name field, enter your

ISP's name. Enter the Primary and the

Secondary Phone numbers to connect

to the ISP. Next, enter the user name and

password exactly as your ISP assigned

them.

Select Obtain an IP Address

Automatically if you have a dynamic IP

address; otherwise select Static IP

Address and type your ISP assigned IP

address in the text box below.

Choose the type of Network Address

Translation (NAT) you need. Select Full

Feature if you have multiple public WAN

IP addresses for your P-202H Plus v2.

Select SUA Only if you have just one

public WAN IP address for your P-202H

Plus v2. Select None to disable NAT.

Note: When you select Full Feature you

must configure at least one

address mapping set. For more

information about NAT and the choices listed refer to your User's Guide.

In the Transfer Type drop-down list box, choose the type of connection between the router and this remote

node. Select 64K, or Leased. If you selected 64K, select the way you use the PPP Multilink protocol. You

can either select not to (Off) or always (Always) to bundle multiple links in a single connection to boost the

effective throughput between two nodes. Otherwise, select BOD (Bandwidth on Demand) to add or subtract

links dynamically according to traffic demand.

In the Max Idle Timeout field, enter the amount of time (in seconds) after which you want the connection to

timeout if the line remains consistently idle.

Click Next.

P-202H Plus v2 Quick Start Guide

8Verify the settings in the screen. To

change the LAN information on the P-

202H Plus v2, click Change LAN

Configuration. Otherwise click Save

Settings to save the configuration and

skip to step 10.

9Enter the LAN IP address of your P-202H

Plus v2 in dotted decimal notation in the

LAN IP Address field. For example,

192.168.1.1 (factory default). Enter a

subnet mask in dotted decimal notation in

the LAN Subnet Mask field.

Note: If you change the P-202H Plus v2's

LAN IP address, you must use the

new IP address if you want to

access the web configurator again.

From the DHCP Server drop-down list

box, select On to allow your P-202H Plus

v2 to assign IP addresses, an IP default

gateway and DNS servers to computer

systems that support the DHCP client.

Select Off to disable DHCP server.

When DHCP server is used, set the following items:

P-202H Plus v2 Quick Start Guide

Specify the first of the contiguous addresses in the IP address pool in the Client IP Pool Starting Address

field. Specify the size or count of the IP address pool in the Size of Client IP Pool field. Enter the IP

address(es) of the DNS server(s) in the Primary DNS Server and/or Secondary DNS Server fields.

Click Finish.

10 The P-202H Plus v2 automatically tests

the connection to the computer(s)

connected to the LAN ports. To test the

WAN connection from the P-202H Plus

v2 to the ISP, click Start Diagnose.

Otherwise click Return to Main Menu to

go back to the Site Map screen.

Troubleshooting

1If you cannot access the web configurator using Internet Explorer in Windows XP or Windows Server

2003, make sure you allow pop-up windows, JavaScripts and Java permissions or set the Internet

security level lower than High in Internet Explorer (in Internet Explorer, click Tools > Internet Options >

Security > Custom Level...). See the appendix in the User’s Guide for more information.

2If you cannot access the Internet when your computer is connected to the LAN port, follow these steps.

A) Check the LEDs on the front panel. If they are different than what is described in section 2, make sure

the connections are correct. (See section 2.) If the LEDs are still different, turn off the device, wait a few

seconds, and turn it on again.

B) Follow the steps in section 3again. Make sure you enter the correct information. For example, make

sure you type the user name and password correctly. The user name and password are case sensitive.

C) If you are using a new Internet account, contact your ISP to make sure it is active.

D) If you still have problems, see Troubleshooting in the User’s Guide.

Set Up Your Computer’s IP Address

This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address.

This ensures that your computer can communicate with your P-202H Plus v2. Refer to your User’s Guide for

detailed IP address configuration for other Windows and Macintosh computer operating systems.

1In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.

2In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up

Connections.

P-202H Plus v2 Quick Start Guide

3Right-click Local Area Connection and then click Properties.

4Select Internet Protocol (TCP/IP) (under the General tab in Win

XP) and click Properties.

5The Internet Protocol TCP/IP Properties screen opens (the

General tab in Windows XP).

6Select the Obtain an IP address automatically and Obtain

DNS server address automatically options.

7Click OK to close the Internet Protocol (TCP/IP) Properties

window.

8Click Close (OK in Windows 2000/NT) to close the Local Area

Connection Properties window.

9Close the Network Connections screen.

Viewing Your Product’s Certifications

1Go to http://www.zyxel.com.

2Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3Select the certification you wish to view from this page.

Andere Handbücher für P-202H Plus v2

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications P-791R V2 Handbuch

ZyXEL Communications

ZyXEL Communications P-2802HW(L)-IX Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PMG2005-T20B Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 650H-E Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications DX3301-T0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PMG1005-T20B Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS1100-16 - EDITION 1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL Prestige 100WH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8324-B10A series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PMG5318-B20B Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-335 Plus Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AES-100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-105/ES-108 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications FSG2200HNU Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4604 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4604 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HN-51 - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1302-T11C Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 941 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 100IH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2602R-D1A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XMG Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6616 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-202H Plus v2 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung