ZyXEL Communications GS1100-16 - EDITION 1 Bedienungsanleitung

Quick Start Guide

www.zyxel.com

GS1100 Series

Unmanaged Gigabit Ethernet Switch

Version 1.00

Edition 4, 02/2013

User’s Guide

GS1100 Series User’s Guide2

IMPORTANT!

READ CAREFULLY BEFORE USE.

KEEP THIS GUIDE FOR FUTURE REFERENCE.

Screenshots and graphics in this book may differ slightly from your product due to differences in

your product firmware or your computer operating system. Every effort has been made to ensure

that the information in this manual is accurate.

Table of Contents

GS1100 Series User’s Guide 3

Table of Contents

Table of Contents .................................................................................................................................3

Chapter 1

Getting to Know Your Switch...............................................................................................................5

1.1 Introduction .........................................................................................................................................5

1.2 Features ..............................................................................................................................................6

1.3 Applications .........................................................................................................................................6

1.3.1 Standalone Workgroup ..............................................................................................................7

1.3.2 Bridging .....................................................................................................................................7

1.4 Power Over Ethernet (PoE) ................................................................................................................7

Chapter 2

Hardware Description and Connection ..............................................................................................9

2.1 Rear Panel .......................................................................................................................................9

2.1.1 Rear Panel Power Connection ..................................................................................................9

2.2 Front Panel ..........................................................................................................................................9

2.2.1 RJ-45 Auto-negotiating Ports ..................................................................................................10

2.2.2 IEEE 802.3az EEE ..................................................................................................................10

2.2.3 SFP Slots (GS1100-24 Only) ...................................................................................................10

2.2.4 Front Panel Connections .........................................................................................................12

2.2.5 Front Panel LEDs ....................................................................................................................12

2.3 Hardware Installation ........................................................................................................................14

2.3.1 Wall Mounting ..........................................................................................................................14

2.3.2 Rack Mounting .........................................................................................................................15

2.3.3 Mounting the Switch on a Rack ...............................................................................................16

Chapter 3

Troubleshooting..................................................................................................................................19

3.1 Improper Network Cabling and Topology ..........................................................................................20

Appendix A Legal Information............................................................................................................21

Index ....................................................................................................................................................23

Table of Contents

GS1100 Series User’s Guide

GS1100 Series User’s Guide 5

CHAPTER 1

Getting to Know Your Switch

1.1 Introduction

This chapter describes the key features, benefits and applications of your Switch.

This User’s Guide covers the following models: GS1100-8HP, GS1100-16, GS1100-24, and GS1100-

24E. The Switch is a 10/100/1000 Mbps multi-port switch that can be used to build high-

performance switched workgroup networks. The Switch is a store-and-forward device that offers

low latency for high-speed networking. The Switch is fanless and designed for workgroups,

departments or backbone computing environments for small businesses.

The GS1100-8HP has four GbE PoE ports that can supply power to the connected PoE powered

devices.

The GS1100-24 has two SFP slots for uplink connection. Use SFP transceivers in these slots for

100Mbps or 1Gbps connections to backbone Ethernet switches.

The Switch has a built-in algorithm that automatically assigns priority to received packets. It can

operate in low power idle mode in compliance with IEEE 802.3az Energy Efficient Ethernet (EEE).

Table 1 GS1100 Series Comparison Table

PORT/SWITCH DETAILS GS1100-8HP GS1100-16 GS1100-24 GS1100-24E

8 10/100/1000Base-T Ethernet ports

(including 4 PoE ports)

16 10/100/1000Base-T Ethernet ports

24 10/100/1000Base-T Ethernet ports

2 100/1000Base-X SFP slots

One physical IEEE 802.3az ON/OFF button

One power ON/OFF switch

Chapter 1 Getting to Know Your Switch

GS1100 Series User’s Guide

Figure 1 Front Panel

1.2 Features

The following are the essential features of the Switch.

• Conforms to IEEE 802.3, 802.3u, 802.3ab and 802.3x standards.

• Auto-negotiating 10/100/1000 Mbps Gigabit Ethernet (GbE) RJ-45 ports.

• Auto-sensing crossover for all 10/100/1000 Mbps Gigabit Ethernet (GbE) RJ-45 ports.

• Supports N-Way protocol for speed (10/100/1000 Mbps) and duplex mode (Half/Full) auto-

detection.

• Supports store-and-forward switching.

• Supports automatic address learning.

• Supports IEEE 802.3az EEE

• Supports IEEE 802.3af and IEEE 802.3at PoE standards (only GS1100-8HP)

• Full wire speed forwarding rate.

• Supports 802.1p CoS.

• Embedded 8K MAC address table providing 8000 MAC addresses entries.

1.3 Applications

This section provides two network topology examples in which the Switch is used.

GS1100-8HP

GS1100-16

GS1100-24

GS1100-24E

Chapter 1 Getting to Know Your Switch

GS1100 Series User’s Guide 7

1.3.1 Standalone Workgroup

In this application, the Switch is an ideal solution for small networks where rapid growth can be

expected in the near future.

The Switch can be used standalone for a group of heavy traffic users. You can connect computers

directly to the Switch’s port or connect other switches to the Switch.

In this example, all computers can share high-speed applications on the server. To expand the

network, simply add more networking devices such as switches, routers, computers, print servers

etc.

Figure 2 Standalone Workgroup Example

1.3.2 Bridging

With its large address table and high performance, the Switch is an ideal solution for department

networks to connect to the corporate backbone or for connecting network segments.

The following figure depicts a typical segment bridge application of the Switch in an enterprise

environment. The two networks (RD and Sales), the standalone server and the computers can all

communicate with each other and share all network resources.

Figure 3 Bridging Example

1.4 Power Over Ethernet (PoE)

The PoE function is available for GS1100-8HP only.

Chapter 1 Getting to Know Your Switch

GS1100 Series User’s Guide

Ports 1 to 4 on the GS1100-8HP are IEEE 802.3at High Power over Ethernet (PoE) compliant and

can supply power of up to 30W per Ethernet port and up to the total PoE power budget per Switch.

A powered device (PD) is a device such as an access point or a switch, that supports PoE (Power

over Ethernet) so that it can receive power from another device through a 10/100/1000 Mbps

Ethernet port.

In the figure below, the IP camera and IP phone get their power directly from the Switch. Aside

from minimizing the need for cables and wires, PoE removes the hassle of trying to find a nearby

electric outlet to power up devices.

Figure 4 Powered Device Examples

GS1100 Series User’s Guide 9

CHAPTER 2

Hardware Description and Connection

2.1 Rear Panel

The power receptacle is located on the rear panel of the Switch. Refer to the power supply

requirements on the panel.

Figure 5 Rear Panel

2.1.1 Rear Panel Power Connection

Connect one end of the supplied power cord or power adaptor to the power receptacle on the back

of the Switch and the other end to the appropriate power source.

For the GS1100-8HP, GS1100-16 and GS1100-24E, use the POWER ON/OFF switch to have the

Switch power on or off.

2.2 Front Panel

The front panel of the Switch includes the auto-negotiating 10 Base-T/100 Base-TX/1000 Base-T

RJ-45 ports and the LEDs.

GS1100-16

GS1100-24

GS1100-8HP

GS1100-24E

Chapter 2 Hardware Description and Connection

GS1100 Series User’s Guide

The GS1100-24 has two SFP slots. Refer to Section 2.2.3 on page 10 for more information.

2.2.1 RJ-45 Auto-negotiating Ports

The 10 Base-T/100 Base-TX/1000 Base-T RJ-45 ports are auto-negotiating and auto-crossover.

An auto-negotiating port can detect and adjust to the optimum Ethernet speed (10/100/1000

Mpbs) and duplex mode (full duplex or half duplex) of the connected device.

An auto-crossover (auto-MDI/MDI-X) port automatically works with a straight-through or crossover

Ethernet cable.

2.2.2 IEEE 802.3az EEE

The Switch supports the IEEE 802.3az EEE (Energy Efficient Ethernet) standard to help reduce

power consumption. This allows the Switch to go into power saving mode and switch off part of

receive and transmit circuitry when it is not transmitting or receiving data through an Ethernet

connection.

An EEE-enabled device initiates Low Power Idle (LPI) signals to negotiate and wake up the remote

device when there is data to be transmitted. To use EEE, both devices should be EEE compliant.

EEE is configured on a per-system basis in the Switch. If one of the networking devices that

connect to the Switch doesn't support EEE, EEE may not work in the Switch to save power.

Press in the IEEE 802.3az EEE ON/OFF button on the front panel to turn on the EEE feature.

Disable it if you don't want the network performance to be impacted due to the latency from the

additional time required for the sleep and wake transition or if the remote side doesn't support it.

2.2.3 SFP Slots (GS1100-24 Only)

These are slots for Small Form-factor Pluggable (SFP) transceivers. A transceiver is a single unit

that houses a transmitter and a receiver. The Switch does not come with transceivers. You must use

transceivers that comply with the Small Form-factor Pluggable (SFP) Transceiver MultiSource

Agreement (MSA). See the SFF committee’s INF-8074i specification Rev 1.0 for details.

You can change transceivers while the Switch is operating. You can use different transceivers to

connect to Ethernet switches with different types of fiber-optic or even copper cable connectors.

To avoid possible eye injury, do not look into an operating fiber-optic

module’s connectors.

• Type: SFP connection interface

• Connection speed: 100 Megabit per second (Mbps) or 1 Gigabit per second (Gbps)

2.2.3.1 Transceiver Installation

Use the following steps to install a SFP module.

1Insert the transceiver into the slot with the exposed section of PCB board facing down.

Andere Handbücher für GS1100-16 - EDITION 1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications Prestige P660RU-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-3000H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige P-662HW-61 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 650 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VES-1012 - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Dimension GS-3012 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2802HW(L)-IX Handbuch

ZyXEL Communications

ZyXEL Communications o2 HomeBox 6641 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 681 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-2108 Referenzhandbuch

ZyXEL Communications

ZyXEL Communications WAH3004 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-335WT Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL Prestige 100MH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PMG5317-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8924 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660RU-T1 v3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2612HNU-F1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS2220-50 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL Dimension ES-105A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAir G-2000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 652H series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-419N v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL EES-1024AF Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 650HW Handbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung