ZyXEL Communications P-2602H-D1A Bedienungsanleitung

ZyXEL Confidential

340adq4c0 1/36

ZyXEL

Firmware Release Note

P-2602H/HL/HW/HWL-D1A

Standard version

Release 3.40(ADQ.4)C0

Date: March 16 2007

Author: Chun Hsing Chien

ZyXEL Confidential

340adq4c0 2/36

ZyXEL P-2602H/HL/HW/HWL-D1A Standard

Version

Release 3.40(ADQ.4)C0

Release Note

Date: March 16, 2007

Supported Platforms:

ZyXEL P-2602H/HL/HW/HWL-D1A

Versions:

ZyNOS Version: V3.40(ADQ.4) | 03/16/2007

Bootbase Version: V1.13 | 02/16/2006 14:05:00

Notes:

The P-2602HWL-D1A, is 4th generation of ZyXEL ADSL product family. It is a high

performance ADSL/ADSL2 router for small/medium office to have Internet access and

LAN-to-LAN application over the existing copper line. P-2602HWL-D1A takes advantage

of much higher data rate than ADSL, speed up to 12Mbps (ADSL2), faster start-up,

advanced diagnostics and better power management. This high performance ADSL router

is a high integrated 4 port 10/100M auto MDI/MDIX switch, advanced secure

VPN/Firewall, Bandwidth Management, IEEE 802.11g wireless access, and Voice over IP

communication capability for small/medium business or small remote office.

P2602HWL-D1A provides an embedded mini-PCI module for 802.11g Wireless LAN

connectivity, four single auto-sensing, auto-detection 10/100BASE-T Ethernet ports for

connection to the user’s local network, and a single RJ-11/RJ-45 port for connection to

ADSL/ADSL2 line.

The version of modem code is TI AR7 06.00.04.00.

The version of Wireless APDK code is 6.3.1.26

ZyXEL Confidential

340adq4c0 3/36

Features:

Modifications in V 3.40(ADQ.4) | 03/16/2007

1. Change to FCS version.

Modifications in V 3.40(ADQ.4)b3 | 03/07/2007

2. [BUG FIX][SPR: 070129541]

When DTMF Mode field was set to RFC2833 and call from SIP endpoint to DUT's

PSTN network (SIP to FXO), DUT will send SIP INFO DTMF packets to PSTN

switch.

3. [BUG FIX][SPR: 070130629]

When DTMF Mode field was set to RFC2833(or PCM) and VoIP trunking is disabled,

DUT will send RFC2833(or PCM) and SIP INFO at the same time.

4. [BUG FIX][SPR: 070213108]

Callee side Enable Trunking, Caller one Call use PSTN Call to Callee and another

Call use VoIP Call (Codec=G.729) to Callee, Callee will occur exception.

5. [BUG FIX]

System got crash when configuring WPA setting in SMT menu 23.4.

Modifications in V 3.40(ADQ.4)b2 | 02/08/2007

[BUG FIX][SPR: 070130630]

When setting "Voice Compression Type" to "G_726-16" or "G_726-24", caller can not

make the VoIP call with callee.

Modifications in V 3.40(ADQ.4)b1 | 01/17/2007

[ENHANCEMENT]

Support VoIP Romfile convert to make it backward compatiable with ADQ/AJK.2 and

ADQ/AJK.3

Converted settings included: SIP, PhoneBook and PhoneConfig feature keys.

Support "ip ippolicy" cli command.

Support WLAN NVS file format check after NVS file is downloaded. (TE requirement)

Support “ip teifconf” cli command for TE test program. (TE requirement)

Support “DRAM Post test” on HTP test. (TE requirement)

[BUG FIX]

Change FXO DTMF type from SIP_INFO to PCM type to fix sometimes unexpected

digits be detected from fxo port.

Modifications in V 3.40(ADQ.3)C0 | 12/13/2006

Change to FCS version.

Modifications in V 3.40(ADQ.3)b5 | 12/05/2006

[ENHANCEMENT]

TR-069 enhancement:

ZyXEL Confidential

340adq4c0 4/36

Change the HTTP session maintaintance to "Keep Alive" for each TR-069

session.

Enlarge the SOAP message body container size from 4096 to 8192.

Modifications in V 3.40(ADQ.3)b4 | 11/16/2006

[ENHANCEMENT]

Support firewall rule page control.on Web GUI “Security > Firewall > Rules”.

The number of page control is 10.

Update following Web help contents

Security > Certificates > My Certificates

Advanced > Bandwidth MGMT > General

VoIP > Phone > Common

VoIP > Phone > Analog Phone > Advanced

VoIP > Phone Book > Distinctive Ring

Modifications in V 3.40(ADQ.3)b3 | 10/24/2006

[ENHANCEMENT]

Support Full G.726 Codec for GUI & CLI command.

Support G.723 Codec for CLI command only.

Support Call Fallback GUI.

Support Auto Dail(HotLine) GUI.

Enhanced Distinctive Ring GUI and rename Group Ring to Distinctive Ring.

Modifications in V 3.40(ADQ.3)b2 | 09/27/2006

[ENHANCEMENT]

Support Auto MBM

Synchronize the reset button behavior

1 sec: enable/disable WLAN function

3 sec: enable OTIST

10 sec: reset to factory default

Support Certificates

Support VPN with Certificate security.

Enhance Phone Configuration

Do not disturb (*95# , #95#)

Call Forward to configure call fotable. (*21#, #21#, *22*, *23*, *24*)

Remove STUN support

Remove Web GUI HTTPS configuration in Remote Management.

Modifications in V 3.40(ADQ.3)b1 | 08/11/2006

[ENHANCEMENT]

Call Features:

Support Call Park / Call Pickup

Support Call return

Support Call Waiting Active/Inactive

Support Caller ID enable/disable

ZyXEL Confidential

340adq4c0 5/36

Support Phase 2 Country code

Support Distinctive Ringing(Group Ring)

Support Do not disturb

Support Early Media

Support Hot line

Support Music on Hold

Support MWI

Support Phone configuration

Call through cross PSTN network(TRUNKING)

Provisioing& Management

Support TR104 provisioning

NAT traversal

Support STUN

MISC

Support TR-069/TR-104

Support CONE NAT on-line change type

Support VOICE_PACKET_ROUTE

WLAN

Upgrade TI APDK 6.3.0.126

Support WiFi new spec requires 64 char shared key with Radius server

Modifications in V 3.40(ADQ.2)C0 | 07/24/2006

Change to FCS version.

[KNOWN ISSUE]

When Country Code=UK, the Caller ID can’t display.

Modifications in V 3.40(ADQ.2)b2 | 07/21/2006

[BUGFIX]

Analog Phone 1 & Phone 2 can't display CLID.

Modifications in V 3.40(ADQ.2)b1 | 07/18/2006

[ENHANCEMENT]

Country Code support for different ring and tone for USA, AUSTRIA, BELGIUM,

DENMARK, FINLAND, NETHERLAND, NORWAY, SPAIN, SWEDEN,

SWITZERLAND, UK GERMANY, Australia, Ireland, CZECH and ITALY, total 16

countries.

1. Support Ring for Frequency, Amplitude(Vrms)-No load, Amplitude(Vrms)-5

REN, and Cadence.

2. Support Tone for Dial Tone, Busy Tone, Congestion Tone, Ringback Tone,

Call Wait Tone, and Re-order Tone.

3. Codec DAA is not supported yet.

4. Caller ID (CID) is not supported yet.

Modifications in V 3.40(ADQ.3)b1 | 06/19/2006

ZyXEL Confidential

340adq4c0 6/36

1. [ENHANCEMENT]

Support HTTPS

Support TR-069 /TR-104 with HTTPS

Support CONE NAT on-line change type

Support up to 13 WLAN channels and high power by country code

Support VOICE_PACKET_ROUTE (decide which PVC for voice packet)

Modifications in V 3.40(ADQ.1)C0 | 06/19/2006

Change to FCS version.

[KNOWN ISSUE]

IOP issue with Centrino2200BG, low WLAN throughput within 50cm distance

Modifications in V 3.40(ADQ.1)b1 | 06/13/2006

[ENHANCEMENT]

Support WLAN module detection automatically from now on.

Modifications in V 3.40(ADQ.0)C0 | 05/12/2006

Change to FCS version.

Modifications in V 3.40(ADQ.0)b11 | 05/10/2006

None.

Modifications in V 3.40(ADQ.0)b10 | 05/08/2006

[ENHANCEMENT]

Enlarge the FTP_BUFFER_SIZE from 0x320000 to 0x3D0000.

Modifications in V 3.40(ADQ.0)b9 | 04/26/2006

[ENHANCEMENT]

Support WLAN LED on/off check mechanism on HTP test.

Support WLAN power switch when power cycle fail.

Support Outbound Proxy in Web GUI.

Modifications in V 3.40(ADQ.0)b8 | 04/24/2006

[ENHANCEMENT]

Support ADM6996I AD version.

Support full infomations in “sys atsh” CLI commands

Support embedded Web GUI Help

Modifications in V 3.40(ADQ.0)b7 | 04/03/2006

[ENHANCEMENT]

Support modem code TI AR7 06.00.04.00.

Modifications in V 3.40(ADQ.0)b5 | 03/24/2006

ZyXEL Confidential

340adq4c0 7/36

[ENHANCEMENT]

Support LIFELINE_AUTODETECT.

Support TI 1350 and APDK 6.3.0.23

Modifications in V 3.40(ADQ.0)b4 | 02/24/2006

[ENHANCEMENT]

Support TI 1350 and APDK 6.3.0.18

Support modem code TI AR7 06.00.02.00

Suuport MultiBoot Client version 2.3

Modifications in V 3.40(ADQ.0)b3 | 01/25/2006

2. [ENHANCEMENT]

Support CONE NAT

Support TI 1350 and APDK 6.2.0.25

Support Web NewGUI.

Enhance "Triple Play" feature

1. Support Multi ports to Multi PVCs mapping

2. Support WLAN port mapping

3. Support IGMP Snooping

Integrated DNS

Support Time Zone by City

Support throughput enhancement

Support OTIST(press 1s on reset button to turn on or turn off the WLAN; 5s for OTIST;

10s to reset back to factory default)

Support VoIP Phase 2 call feautre.

Modifications in V 3.40(ADQ.0)b2 | 12/19/2005

none

Modifications in V 3.40(ADQ.0)b1 | 12/16/2005

1. Create this project for OBM version.

ZyXEL Confidential

340adq4c0 8/36

Annex A CI Command List

Command Class List Table

System Related Command Exit Command Ethernet Related Command

WAN Related Command WLAN_Related_Command IP Related Command

IPSec Related Command PPP Related Command Bridge Related Command

Radius Related Command 8021x Related Command Firewall Related Command

Configuration Related Command SMT Related Command Voice Related Command

SystemRelatedCommand Home

Command Description

sys

adjtime retrive date and time from Internet

cbuf

display [a|f|u] display cbuf a: all f: free u: used

cnt cbuf static

display display cbuf static

clear clear cbuf static

baud <1..5> change console speed

callhist

display display call history

remove <index> remove entry from call history

clear clear the counters in GUI status menu

countrycode [countrycode] set country code

date [year month date] set/display date

domainname display domain name

edit <filename> edit a text file

enhanced return OK if commands are supported for PWC

purposes

errctl [level] set the error control level

0:crash no save,not in debug mode (default)

1:crash no save,in debug mode

2:crash save,not in debug mode

3:crash save,in debug mode

event

display display tag flags information

trace display system event information

display display trace event

clear <num> clear trace event

extraphnum maintain extra phone numbers for outcalls

add <set 1-3> <1st phone num> [2nd phone

num] add extra phone numbers

display display extra phone numbers

node <num> set all extend phone number to remote node

<num>

remove <set 1-3> remove extra phone numbers

reset reset flag and mask

feature display feature bit

fid

display display function id list

firmware display ISDN firmware type

hostname [hostname] display system hostname

iface

ZyXEL Confidential

340adq4c0 9/36

disp [#] display iface list

isr [all|used|free] display interrupt service routine

interrupt display interrupt status

log

category

access [0:none/1:log] record the access control logs

attack [0:none/1:log/2:alert/3:both] record and alert the firewall attack logs

display display the category setting

error [0:none/1:log/2:alert/3:both] record and alert the system error logs

ipsec [0:none/1:log] record the access control logs

mten [0:none/1:log] record the system maintenance logs

upnp [0:none/1:log] record upnp logs

urlblocked [0:none/1:log/2:alert/3:both] record and alert the web blocked logs

urlforward [0:none/1:log] record web forward logs

clear clear log

display display all logs

errlog

clear display log error

disp clear log error

online turn on/off error log online display

load load the log setting buffer

mail

alertAddr [mail address] send alerts to this mail address

display display mail setting

logAddr [mail address] send logs to this mail address

schedule display display mail schedule

schedule hour [0-23] hour time to send the logs

schedule minute [0-59] minute time to send the logs

schedule policy

[0:full/1:hourly/2:daily/3:weekly/4:non

mail schedule policy

schedule week

[0:sun/1:mon/2:tue/3:wed/4:thu/5:fri/6:

sat]

weekly time to send the logs

server [domainName/IP] mail server to send the logs

subject [mail subject] mail subject

save save the log setting buffer

syslog

active [0:no/1:yes] active to enable unix syslog

display display syslog setting

facility [Local ID(1-7)] log the messages to different files

server [domainName/IP] syslog server to send the logs

mbuf

cnt

disp display system mbuf count

clear clear system mbuf count

link link list system mbuf link

pool <id> [type] list system mbuf pool

status display system mbuf status

disp <address> display mbuf status

debug [on|off]

memory <address> <length> display memory content

ZyXEL Confidential

340adq4c0 10/36

memwrite <address> <len> [data list ...] write some data to memory at <address>

memwl <address> write long word to memory at <address>

memrl <address> read long word at <address>

memutil

usage display memory allocate and heap status

mqueue <address> <len> display memory queues

mcell mid [f|u] display memory cells by given ID

msecs [a|f|u] display memory sections

mtstart <n-mcell> start memory test

mtstop stop memory test

mtalloc <size> [n-mcell] allocate memory for testing

mtfree <start-idx> [end-idx] free the test memory

model display server model name

proc

display display all process information

stack [tag] display process's stack by a give TAG

pstatus display process's status by a give TAG

queue

display [a|f|u] [start#] [end#] display queue by given status and range numbers

ndisp [qid] display a queue by a given number

quit quit CI command mode

reboot [code] reboot system

code = 0 cold boot,

= 1 immediately boot

= 2 bootModule debug mode

reslog

disp display resources trace

clear clear resources trace

stdio [second] change terminal timeout value

time [hour [min [sec]]] display/set system time

timer

disp display timer cell

trace [on|off] set/display timer information online

start [tmValue] start a timer

stop <ID> stop a timer

trcdisp monitor packets

trclog

switch [on|off] set system trace log

online [on|off] set on/off trace log online

level [level] set trace level of trace log #:1-10

type <bitmap> set trace type of trace log

disp display trace log

clear clear trace

call display call event

encapmask [mask] set/display tracelog encapsulation mask

trcpacket

create <entry> <size> create packet trace buffer

destroy packet trace related commands

channel <name>

[none|incoming|outgoing|bothway] <channel name>=enet0,sdsl00, fr0

set packet trace direction for a given channel

string enable smt trace log

switch [on|off] turn on/off the packet trace

disp display packet trace

Andere Handbücher für P-2602H-D1A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications Prestige P660RU-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 623R-T Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Armor Z1 NBG6816 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P650HW-DE Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Dimension ES-3024 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL Prestige 202 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XS1920 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-791R V2 Handbuch

ZyXEL Communications

ZyXEL Communications P-663H-51 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS2210 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAir G-2000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NR2101 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WAH7003 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2602HWLNI Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE7461-M602 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PES-1014 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Nebula NR7101 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 941 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Dimension ES-124P Referenzhandbuch

ZyXEL Communications

ZyXEL Communications LTE7485-S905 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-419N v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS-2724 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 623ME(-I) Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-202H Plus v2 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung