ZyXEL Communications P-2612HNU-Fx Series Bedienungsanleitung

www.zyxel.com

802.11n ADSL2+ VoIP IAD

Firmware V3.00

Edition 1, 1/2010

P-2612HNU-Fx

DEFAULT LOGIN DETAILS

IP Address: http://192.168.1.1

User Login: User Name: user

Password: 1234

Administrator

Password: 1234

ZyXEL Communications Corporation

Device Panels

WLAN

BUTTON

POWER

LED DSL

LED

INTERNET

LED

PHONE 1, 2

ON/OFF

RESET

POWER

ETHERNET

PORTS

LEDS

WAN

LED

WLAN

LED

ETHERNET

LED

PHONE

PORTS

DSL/WAN

WAN

PORT

DSL

PORT

USB

LED

USB

PORTS

Overview

The P-2612HNU-Fx is an ADSL Integrated Access Device (IAD) which

combines high-speed ADSL Internet access, a built-in switch, a firewall

and high-speed wireless networking capability. It also has a USB 2.0 port

for sharing files via a USB compatible storage device and two phone

ports for making calls over the Internet (Voice over IP or VoIP). The P-

2612HNU-Fx can also function as a print server.

Requirements

Make sure you have the following things before you start.

• Internet access - account information provided by your ISP, such as

user name, password, and so on.

• VoIP account - You need the account information provided by your

VoIP service provider (the company that lets you make phone calls

over the Internet).

• Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with

JavaScript enabled.

See the User’s Guide on the CD for all configuration details including

setting up a shared printer.

Hardware Connections

Remove the P-2612HNU-Fx’s plastic cover before using it.

1. Do one of the following for your Internet connection:

a. DSL: Use a telephone wire to connect this port to a telephone jack

(or the DSL or MODEM jack on a splitter, if you have one).

b. WAN: If you have a DSL router or modem already in your network

or you want to use a cable modem, push the DSL/WAN switch to

the WAN side and use an Ethernet cable to connect this port to an

Ethernet jack with Internet access.

2. ETHERNET: Use an Ethernet cable to connect a computer to one of

these ports for initial configuration and/or Internet access.

3. USB 2.0: Connect a USB (version 2.0 or lower) memory stick or a

USB hard drive for file sharing. The P-2612HNU-Fx automatically

detects the USB device. Alternatively, use a USB cable (not

provided) to connect a USB (version 2.0 or lower) printer to this

port.

4. PHONE: Use a telephone cable (and any telephone adaptor provided

with your P-2612HNU-Fx) to connect a telephone to the PHONE 1 or

PHONE 2 port. If you only have one telephone, you should use port 1.

5. Use the power adaptor provided with your P-2612HNU-Fx to connect

an appropriate power source to this socket.

6. Push the power button to the on position.

Look at the LEDs (lights) on the top panel of the P-2612HNU-Fx.

• The POWER light blinks during start-up and is green once the P-

2612HNU-Fx is ready.

• An ETHERNET light turns on if the corresponding ETHERNET port

is properly connected. An Ethernet port’s light blinks when the P-

2612HNU-Fx is sending or receiving data through it.

• The WLAN light stays green when the wireless LAN is ready. It

blinks when the P-2612HNU-Fx is sending/receiving data through

the wireless LAN.

• The DSL light stays on if a physical DSL connection exists and

blinks when transmitting data.

The WAN light stays on if this port is properly connected and blinks

when transmitting data.

The INTERNET light is green when Internet access is available.

• The PHONE lights stay on when your SIP account is registered and

they blink if the receiver is off the hook.

• The USB light turns on when there is a USB device (printer or

memory stick) connected to the P-2612HNU-Fx and blinks when

transmitting data.

 If no lights are on, check your connections. Make sure that

you have the power adaptor connected to the P-2612HNU-

Fx and plugged in to an appropriate power source. Make

sure the power source is turned on. Turn the P-2612HNU-Fx

off, wait for a few seconds and turn it back on. If the LEDs

are still off, contact your local vendor.

Log into the Web Configurator

1. Open your browser and enter http://192.168.1.1 (the P-2612HNU-

Fx's default IP address) as the address.

2. For administrator login, enter username admin and password 1234

(default). Only administrators can configure the SIP account settings.

For user login, enter user as the username and 1234 as the

password. Click Login.

 If the login screen does not open, make sure you allow web

browser pop-up windows, JavaScripts and Java

permissions. Your computer should be also set to get an IP

address automatically from a DHCP server. See the

appendices in your User’s Guide for more information.

See your User's Guide for how to use the VoIP > SIP screen to set up

your VoIP account if the INTERNET light is green but the PHONE light is

off.

If the PHONE light is on, skip to Using Your Phones on page 13 to see

how to make calls through the Internet.

See your User’s Guide for how to use the Network > WAN screen to set

up the WAN connection:

• If the DSL/WAN switch is set to DSL and the DSL light is on but

the INTERNET light is off.

• If the DSL/WAN switch set to WAN and the WAN light is on but

the INTERNET light is off.

Set Up a Wireless Network

To set up a wireless network you need at least one wireless network

card/adapter.

• If you have a desktop computer, use either a wireless USB adapter

or a wireless PCI adapter.

• If you have a laptop, use either a wireless USB adapter or a

wireless CardBus card. These are built into many laptops.

Setting Up a Wireless Network with WPS

If your wireless devices display the WPS logo, you

can use Wi-Fi Protected Setup (WPS) to add

wireless devices to your wireless network. If your

wireless devices do not display the WPS logo, go to

Set Up a Wireless Network Manually on page 11 to manually set up a

wireless network.

The P-2612HNU-Fx supports two WPS methods for creating a secure

connection.

• Push Button Configuration - create a secure wireless network

simply by pressing the P-2612HNU-Fx’s physical WPS button. See

Push Button Configuration on page 9.

• PIN Configuration - create a secure wireless network by entering

your wireless device’s PIN (Personal Identification Number) into the

configuration screen of the P-2612HNU-Fx. See PIN Configuration

on page 10.

You must use the same method on the P-2612HNU-Fx and the wireless

client.

Push Button Configuration

1. Place a WPS-enabled device that is installed in your system and

supports the WPS Push Button method within range of the P-

2612HNU-Fx.

2. Press the WLAN button on the P-2612HNU-Fx’s top panel for five

seconds.

3. Use the WPS-enabled device’s WPS button. It can be either a button

in the utility or a physical button. See the device’s documentation if

you cannot locate the WPS button. It doesn’t matter which button is

pressed first. You must press the second button within two minutes of

pressing the first one.

4. The P-2612HNU-Fx and the wireless device establish a secure

connection. This can take up to two minutes.

5. Congratulations! Your computer is now ready to connect to the

Internet wirelessly through your P-2612HNU-Fx.

PIN Configuration

1. Place a WPS-enabled device that is installed in your computer and

supports the WPS PIN configuration method within range of the P-

2612HNU-Fx.

2. Log into the P-2612HNU-Fx’s web configurator at http://192.168.1.1

(see Log into the Web Configurator on page 7for more details on

this).

3. In the Status screen click Network in the left panel then click

Wireless LAN. In the Wireless LAN screen click the WPS tab.

Andere Handbücher für P-2612HNU-Fx Series

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications Prestige 792H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-419N v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications IES-1248-51 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-663H-51 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications DIMENSION ES-1124 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1302-T11C Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8324 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 623ME(-I) Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG1312 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications IES-5000 Series Handbuch

ZyXEL Communications

ZyXEL Communications Dimension ES-4024 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX208M2W SERIES Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660RU-Tx Series Handbuch

ZyXEL Communications

ZyXEL Communications P-334WT Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE7485-S905 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660 series Handbuch

ZyXEL Communications

ZyXEL Communications UAG5100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-645R-A1 Handbuch

ZyXEL Communications

ZyXEL Communications Prestige 643 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-570U Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 660H/HW(-I) Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VES-1008 Handbuch

ZyXEL Communications

ZyXEL Communications Prestige P660RU-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R-Tx v2 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung