ZyXEL Communications P-660HWP-D1 Bedienungsanleitung

ZyXEL Confidential

340APD2C0.docdoc

ZyXEL

Firmware Release Note

P-660HWP-D1

standard version

Release 3.40(APD.2)C0

Date: Nov 28, 2007

Author: David Liu

ZyXEL Confidential

340APD2C0.docdoc

ZyXEL P-660HWP-D1 Standard Version

Release 3.40(APD.2)C0

Release Note

Date: Nov 28, 2007

Supported Platforms:

ZyXEL P-660HWP-D1

Versions:

ZyNOS Version : V3.40(APD.2) | 11/28/2007 13:12:02

Bootbase Version : V1.06 | 1/20/2006 9:44:11

Notes:

The P-660HWP-D1, is 4th generation of ZyXEL ADSL product family. It is a high

performance ADSL/ADSL2/ADSL2+ router for small/medium office to have Internet

access and LAN-to-LAN application over the existing copper line. P-660HWP-D1 takes

advantage of much higher data rate than ADSL, speed up to 12Mbps (ADSL2) or 26Mbps

(ADSL2+), greater reach, faster start-up, advanced diagnostics and better power

management. This high performance ADSL router is a high integrated advanced Firewall,

Bandwidth Management and IEEE 802.11g wireless features to meet the demand of

high-end market.

P-660HWP-D1 provides an embedded mini-PCI module for 802.11g Wireless LAN

connectivity, four single auto-sensing, auto-detection 10/100BASE-T Ethernet ports for

connection to the user’s local network, and a single RJ-11/RJ-45 port for connection to

ADSL/ADSL2/ADSL2+ line.

Support Multiboot V2.3

ADSL data pump version: TI AR7 07.00.04.00

HomePlug F/W version: INT6000-MAC-3-0-3052-1120-20070816-FINAL-B

Features:

Modifications in V3.40(APD.2)C0 | 11/28/2007

1. Change to FCS.

Modifications in V3.40(APD.2)b4 | 11/21/2007

1. [Bugfix]: SPRID:N/A

Symptom: Fix the issue setting above 2 routing PVCs pc in lan can’t access internet when

enable triple play.

Modifications in V3.40(APD.2)b3 | 11/19/2007

1. [Bugfix]: SPRID:071112785

Symptom: Triple-Play has a problem. Set 2 PVCs, one is Router mode, and the other is

Bridge mode. Enable Triple-Play, bind two LAN port to the 2 PVCs respectively. But the

other LAN ports which bind to bridge PVC can still ping the router gateway successfully

ZyXEL Confidential

340APD2C0.docdoc

( the PC using static IP 192.168.1.34 ).

Modifications in V3.40(APD.2)b2 | 11/05/2007

1. [Enhancement]: Change “Network Password” to “Network Name” in web GUI and CI

command.

2. [Enhancement]: Auto detect Intellon F/W version in our RAS code, and auto update

Intellon F/W if current version is older than the one in RAS code.

3. [Bugfix]: SPRID:071021056

Symptom: use CI Command “sys atwz” to modify MAC address then use CI Command

“powerline display” can not get the powerline information

4. [Bugfix]: SPRID :071022064

Symptom: set nmk in GUI have problem.

Condition:

(1) GUI-＞Network-＞Powerline , Enter a new nmk and apply it, GUI show “INTERNAL

ERROR”.

(2) SMT show “set nmk successful!”

(3) Enter GUI again ,nmk show empty.

5. [Bugfix]: SPRID: 071021055

Symptom: enable triple play and use bridge mode, bound powerline to a single PVC , pc

linked to PLA400 can get dynamic ip from dhcp server behind the bridge PVC.

6. [Bugfix]: SPRID: 071021058

Symptom: Use CI Command “powerline setnmk” to set the NMK, then use CI Command

“powerline display” to show the nmk and the result is “unknown.”.

7. [Bugfix]: SPRID: 071021059

Symptom: Use CI Command “powerline config nmk” to set the nmk, “powerline display”

show the nmk has been changed. Change PLA 400’s nmk to be same with the new nmk,

device can not connect to PLA 400.

8. [Bugfix]: SPRID: 071021057

Symptom: In default configuration default “LAN multicast” is None, but on LAN side can

receive IGMP packets.

9. [Bugfix]: SPRID: 071021061

Symptom: Help page show wrong information. The content in help page is not accordant

to the content in working page

10. [Bugfix]: SPRID: 071021060

Symptom: Default firewall-＞Bypass triangle route is disabled, so traffic redirect can not

open website

11. [Bugfix]: SPRID: 071102101

Symptom: use “sys atwz” to modify mac, but can’t modify the powerline module’s mac at

the same time.

12. [Bugfix]: SPRID: N/A

Symptom: Static route remote node mode doesn’t work.

Modifications in V3.40(APD.2)b1 | 10/10/2007

1. [Feature Enhance]: Merge Intellon F/W 3.0.5

2. [Feature Enhance]: Have Static routing configuration in WEB GUI, and can select

gateway IP address mode or gateway remote node mode.

3. [Feature Enhance]: Public/Private IP (allow to have private IP going through NAT while

global – without NAT. This is to be used with FF NAT).

4. [Feature Enhance]: Make PAT in NAT port forwarding, add “TCP/UDP” selection there

too.

5. [Feature Enhance]: Add a possibility to add connections without default gateway (except

1-st connection)

ZyXEL Confidential

340APD2C0.docdoc

6. [Feature Enhance]: Every PVC’s MTU size can be changed separately ( in CLI “wan node

mtu” and GUI ).

7. [Feature Enhance]: Show all connections status in Web GUI

8. [Feature Enhance]: Modify CI command to map Powerline into Triple Play Group by “ sys

tripleplay portbase groupset [groupid] [LAN |PVC] [index] [WLAN] [PWR] “.

9. [Feature Enhance]: Hardware version (in bootbase) has been changed from “00” to

“01”, and HW version range (in mmct) has been changed from “2 0 0” to “2 0 1”. So

old board (use old bootbase) can use new RAS code, but new board (use new bootbase)

can’t load old RAS code.

10. [Bug Fix]: Simultaneous upload/download bug. It reduces Download speed from 20Mbps

to 3-4 Mbps when you start simultaneous upload and download.

11. [Bug Fix]: DNS servers have to be taken from 1-st PVC.

12. [Bug Fix]: Can’t access internet by wireless when using Triple Play for IPTV.

13. [Bug Fix]: IGMP snooping is not saved in rom-file and disappears upon device reboot

14. [Bug Fix]: If a DHCP OFFER packet doesn’t assign default gateway, device will refuse to

work with it until it was fixed.

15. [Bug Fix]: Static route configuration: don’t check for gateway availability when configuring

a route since it makes impossible to pre-configure the device. Also, all routes must work

upon device reboot.

16. [Bug Fix]: Show last CLI command by “Up arrow” key instead of moving cursor up when

connecting by telnet

17. [Bug Fix]: DNS issue: when accessing http://zyxel.* leads to web GUI.

18. [Bug Fix]: Enable Triple Play: LAN PC can't send any file to WLAN PC

19. [Bug Fix]: Fix triple-play throughput issue. the throughput is low when tripleplay enable

and only one route mode pvc exist.

20. [Bug Fix]: Fix AnyIP issue: it should work only on those Eth ports that are mapped to

routing PVC.

21. [Bug Fix]: Fix PADI issue. when PPPoE session is initializing, device should not send

PADI packets to lan ports.

22. [Bug Fix]: Let wireless security to be configured by “wlan ieee8021x…” commands to

have the unified commands in all devices.

23. [Bug Fix]: Exception issue: when device work in full load (DSL, Homeplug, Ethernet

and wireless all enabled), device may go crash and reboot.

24. [Bug Fix]: DSL LED Blinking issue: when baud rate set as 115200, DSL LED will

blink even the phone cable is unplugged

Modifications in V3.40(APD.1)C0 | 7/30/2007

1. Change to FCS.

Modifications in V3.40(APD.1)b1 | 7/13/2007

1. [FEATURE ENHANCE]

Enhance the behavior of CI command “ sys atwz <MAC> <COUNTRYCODE>” to

support write homeplug module MAC address and power table automatically. Home Plug

MAC is router’s MAC plus 1, and according to the country code value, corresponding

power table will be uploaded to homePlug module.

Modifications in V 3.40(APD.0)C0 | 5/11/2007

ZyXEL Confidential

340APD2C0.docdoc

2. Change to FCS.

Modifications in V 3.40(APD.0)b3 | 4/24/2007

1. [BUG FIX] SPRID: 070403123

powerline items doesn't have help page

2. [BUG FIX] SPRID :070409360

Triple play does not work.

[Symptom]when Triple play enabled, LAN PC can not get IP from device and then

can not access Internet.

Modifications in V 3.40(APD.0)b2 | 3/27/2007

1. First release for QA test.

Modifications in V 3.40(APD.0)b2 | 3/27/2007

1. First release for QA test.

Modifications in V 3.40(APD.0)b1 | 1/29/2007

1 Create this project for P-660HWP-D1 standard version

Annex A CI Command List

Command Class List Table

System Related Command Exit Command Ethernet Related Command

WAN Related Command WLAN_Related_Command IP Related Command

PPP Related Command Bridge Related Command Radius Related Command

8021x Related Command Firewall Related Command Configuration Related Command

SMT Related Command

SystemRelatedCommand Home

Command Description

sys

adjtime retrive date and time from Internet

cbuf

display [a|f|u] display cbuf a: all f: free u: used

cnt cbuf static

display display cbuf static

clear clear cbuf static

baud <1..5> change console speed

callhist

display display call history

remove <index> remove entry from call history

clear clear the counters in GUI status menu

countrycode [countrycode] set country code

date [year month date] set/display date

domainname display domain name

edit <filename> edit a text file

enhanced return OK if commands are supported for PWC

ZyXEL Confidential

340APD2C0.docdoc

purposes

errctl [level] set the error control level

0:crash no save,not in debug mode (default)

1:crash no save,in debug mode

2:crash save,not in debug mode

3:crash save,in debug mode

event

display display tag flags information

trace display system event information

display display trace event

clear <num> clear trace event

extraphnum maintain extra phone numbers for outcalls

add <set 1-3> <1st phone num> [2nd phone

num] add extra phone numbers

display display extra phone numbers

node <num> set all extend phone number to remote node

<num>

remove <set 1-3> remove extra phone numbers

reset reset flag and mask

feature display feature bit

fid

display display function id list

firmware display ISDN firmware type

hostname [hostname] display system hostname

iface

disp [#] display iface list

isr [all|used|free] display interrupt service routine

interrupt display interrupt status

logs

category

access [0:none/1:log] record the access control logs

attack [0:none/1:log/2:alert/3:both] record and alert the firewall attack logs

display display the category setting

error [0:none/1:log/2:alert/3:both] record and alert the system error logs

ipsec [0:none/1:log] record the access control logs

mten [0:none/1:log] record the system maintenance logs

upnp [0:none/1:log] record upnp logs

urlblocked [0:none/1:log/2:alert/3:both] record and alert the web blocked logs

urlforward [0:none/1:log] record web forward logs

clear clear log

display display all logs

errlog

clear display log error

disp clear log error

online turn on/off error log online display

load load the log setting buffer

mail

alertAddr [mail address] send alerts to this mail address

display display mail setting

logAddr [mail address] send logs to this mail address

schedule display display mail schedule

schedule hour [0-23] hour time to send the logs

schedule minute [0-59] minute time to send the logs

ZyXEL Confidential

340APD2C0.docdoc

schedule policy

[0:full/1:hourly/2:daily/3:weekly/4:non

mail schedule policy

schedule week

[0:sun/1:mon/2:tue/3:wed/4:thu/5:fri/6:

sat]

weekly time to send the logs

server [domainName/IP] mail server to send the logs

subject [mail subject] mail subject

save save the log setting buffer

syslog

active [0:no/1:yes] active to enable unix syslog

display display syslog setting

facility [Local ID(1-7)] log the messages to different files

server [domainName/IP] syslog server to send the logs

mbuf

cnt

disp display system mbuf count

clear clear system mbuf count

link link list system mbuf link

pool <id> [type] list system mbuf pool

status display system mbuf status

disp <address> display mbuf status

debug [on|off]

memory <address> <length> display memory content

memwrite <address> <len> [data list ...] write some data to memory at <address>

memwl <address> write long word to memory at <address>

memrl <address> read long word at <address>

memutil

usage display memory allocate and heap status

mqueue <address> <len> display memory queues

mcell mid [f|u] display memory cells by given ID

msecs [a|f|u] display memory sections

mtstart <n-mcell> start memory test

mtstop stop memory test

mtalloc <size> [n-mcell] allocate memory for testing

mtfree <start-idx> [end-idx] free the test memory

model display server model name

proc

display display all process information

stack [tag] display process's stack by a give TAG

pstatus display process's status by a give TAG

queue

display [a|f|u] [start#] [end#] display queue by given status and range numbers

ndisp [qid] display a queue by a given number

quit quit CI command mode

reboot [code] reboot system

code = 0 cold boot,

= 1 immediately boot

= 2 bootModule debug mode

reslog

disp display resources trace

clear clear resources trace

stdio [second] change terminal timeout value

ZyXEL Confidential

340APD2C0.docdoc

time [hour [min [sec]]] display/set system time

timer

disp display timer cell

trace [on|off] set/display timer information online

start [tmValue] start a timer

stop <ID> stop a timer

trcdisp monitor packets

trclog

switch [on|off] set system trace log

online [on|off] set on/off trace log online

level [level] set trace level of trace log #:1-10

type <bitmap> set trace type of trace log

disp display trace log

clear clear trace

call display call event

encapmask [mask] set/display tracelog encapsulation mask

trcpacket

create <entry> <size> create packet trace buffer

destroy packet trace related commands

channel <name>

[none|incoming|outgoing|bothway] <channel name>=enet0,sdsl00, fr0

set packet trace direction for a given channel

string enable smt trace log

switch [on|off] turn on/off the packet trace

disp display packet trace

udp send packet trace to other system

switch [on|off] set tracepacket upd switch

addr <addr> send trace packet to remote udp address

port <port> set tracepacket udp port

parse [[start_idx], end_idx] parse packet content

brief display packet content briefly

version display RAS code and driver version

view <filename> view a text file

wdog

switch [on|off] set on/off wdog

cnt [value] display watchdog counts value: 0-34463

romreset restore default romfile

server

access <telnet|ftp|web|icmp|snmp|dns>

<value> set server access type

load load server information

disp display server information

port <telnet|ftp|web|snmp> <port> set server port

save save server information

spt

dump dump spt raw data

root dump spt root data

rn dump spt remote node data

user dump spt user data

slot dump spt slot data

save save spt data

size display spt record size

clear clear spt data

cmgr

ZyXEL Confidential

340APD2C0.docdoc

trace

disp <ch-name> show the connection trace of this channel

clear <ch-name> clear the connection trace of this channel

cnt <ch-name> show channel connection related counter

socket display system socket information

filter

clear clear filter statistic counter

disp display filter statistic counters

sw [on|off] set filter status switch

set <set> display filter rule

netbios

disp display netbios filter status

config <0:LAN to WAN, 1:WAN to

LAN, 2:LAN to DMZ, 3:IPSec

passthrough, 4:Trigger Dial> <on|off>

config netbios filter

ddns

debug <level> enable/disable ddns service

display <iface name> display ddns information

restart <iface name> restart ddns

logout <iface name> logout ddns

cpu

display display CPU utilization

ExitCommand Home

Command Description

exit exit smt menu

Ethernet Related Command Home

Command Description

ether

config display LAN configuration information

driver

cnt

disp <name> display ether driver counters

clear <name> clear ether driver counters

iface <ch_name> <num> send driver iface

ioctl <ch_name> Useless in this stage.

mac <ch_name> <mac_addr> Set LAN Mac address

reg <ch_name> display LAN hardware related registers

rxmod <ch_name> <mode> set LAN receive mode.

mode: 1: turn off receiving

2: receive only packets of this interface

3: mode 2+ broadcast

5: mode 2 + multicast

6: all packets

status <ch_name> see LAN status

init <ch_name> initialize LAN

version see ethernet device type

pkttest

disp

ZyXEL Confidential

340APD2C0.docdoc

packet <level> set ether test packet display level

event <ch> [on|off] turn on/off ether test event display

sap [ch_name] send sap packet

arp <ch_name> <ip-addr> send arp packet to ip-addr

mem <addr> <data> [type] write memory data in address

test <ch_id> <test_id> [arg3] [arg4] do LAN test

pncconfig <ch_name> do pnc config

mac <src_ch> <dest_ch> <ipaddr> fake mac address

WANRelatedCommand Home

Command Description

wan adsl bert ADSL ber

chandata ADSL channel data, line rate

close Close ADSL line

coding ADSL standard current

ctrleint ADSL CTRLE response command

defbitmap ADSL defect bitmap status

dyinggasp Send ADSL dyinggasp

fwav Test the ADSL F/W available ping

fwdl Download modem code, but must reset first

linedata

near Show ADSL near end noise margin

far Show ADSL far end noise margin

open Open ADSL line

opencmd Open ADSL line with specific standard

opmode Show the operational mode

perfdata Show performance information,CRC,FEC, error

seconds..

rdata [start] [length] Read DSP CTRLE registers 512 bytes

reset Reset ADSL modem, and must reload the modem

code again

selftest

long ADSL long loop test

short ADSL short loop test

status ADSL status (ex: up, down or wait for init)

version ADSL version information

vendorid ADSL vendor information

utopia Show ADSL utopia information

cellcnt Show ADSL cell counter

display

shutdown Show the counter of rate adaptive mechanism

happening

rateup Show real status that rate adaptive mechanism

happened

rateadap [on|off] Turn on/off rate adaptive mechanism

dumpcondition [on|off] Turn on/off online debug information of rate

adaptive mechanism

sampletime [mins] Tune the sample time of rate adaptive mechanism

noisegt [dB] if noise margin is 3db greater than before, and

rate is worse than before, then system will do “L1

shutdown RA3”, default is 3db

noisemargin [dB] if noise margin is greater than this value, and rate

is worse than before, then system will do “L1

Andere Handbücher für P-660HWP-D1

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications NBG4115 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XGS4700-48F Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 128L Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AX Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2602H-D1A Referenzhandbuch

ZyXEL Communications

ZyXEL Communications P-791R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R-TX V3 Handbuch

ZyXEL Communications

ZyXEL Communications PMG1005-T20C Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-419N v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-2024PWR Handbuch

ZyXEL Communications

ZyXEL Communications NBG-419N v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1202-T10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8324-B10A series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG3925 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 623R-T Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-570U Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Armor Z1 NBG6816 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL EES-1024AF Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 861H-G1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications A-6000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 645R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HN-T1H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PMG5317-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 623R-T Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung