ZyXEL Communications ZyAir G-2000 Bedienungsanleitung

ZyAIR G-2000

802.11g Wireless 4-port Router

Quick Installation Guide

Version 3.60

February 2004

ZyAIR G-2000 802.11g Wireless 4-port Router

Table of Contents

1 Introducing the ZyAIR ................................................................................................................. 4

2 Hardware Connections ............................................................................................................... 5

2.1 Side Panel and Connections ................................................................................................. 5

2.2 The Front Panel ..................................................................................................................... 6

3 Setting Up Your Computer’s IP Address................................................................................... 8

3.1 Windows 2000/NT/XP ........................................................................................................... 8

3.2 Checking/Updating Your Computer’s IP Address.................................................................. 9

3.3 Testing the Connection to the ZyAIR..................................................................................... 9

4 Internet Access Setup Using the Web Configurator Wizard ................................................. 10

4.1 Accessing the ZyAIR via the Web Configurator .................................................................. 10

4.2 Common Screen Command Buttons................................................................................... 12

4.3 Configuring the ZyAIR Using the Wizard............................................................................. 12

4.4 Test Your Internet Connection ............................................................................................. 15

5 Hardware Installation ................................................................................................................ 15

5.1 Attaching Antennas.............................................................................................................. 15

5.2 Hardware Mounting Installation ........................................................................................... 16

6 Troubleshooting ........................................................................................................................ 19

Procedure to View a Product’s Certification(s)

1. Go to www.zyxel.com.

2. Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3. Select the certification you wish to view from this page

ZyAIR G-2000 802.11g Wireless 4-port Router

1 Introducing the ZyAIR

The ZyAIR B-G2000 is a broadband sharing gateway with a built-in wireless LAN access point and four-

port switch that makes it easy for people to set up a small home/office network and share Internet access via

a broadband (cable/DSL) modem. Key features of the ZyAIR include 802.1x wireless LAN security, WPA

(Wi-Fi Protected Access), firewall, remote management and UPnP. See your User’s Guide for more details

on all ZyAIR features.

You should have an Internet account already set up and have been given most of the following information.

INTERNET ACCOUNT CHECKLIST

Your device’s WAN IP Address (if given): __________________

Encapsulation: (choose one below)

Ethernet Service Type: _______________________

User Name: ____________ Password: ____________

PPTP User Name: ____________ Password: ____________

Your WAN IP Address: ____________ PPTP Server IP Address: ___________

Connection ID (if required): ____________

PPPoE (PPPoE) Service Name: ____________

User Name: ____________ Password: ____________

ZyAIR G-2000 802.11g Wireless 4-port Router

2 Hardware Connections

2.1 Side Panel and Connections

LABEL DESCRIPTION AND FUNCTION

1. LAN Use an Ethernet cable to connect at least one computer for initial ZyAIR configuration.

These ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-crossover

(automatically adjust to the type of Ethernet cable you use (straight-through or

crossover)).

2. WAN

Connect your cable/DSL modem to this port with the cable that came with your modem.

3. POWER

12V DC

Connect the end of the included power adaptor (use only this adaptor) to this power

socket.

After you’ve made the connections, connect the power cable to a power supply and look at the front panel

LEDs.

RESET You only need to use this button if you’ve forgotten the ZyAIR’s password. It returns the

ZyAIR to the factory defaults (password is 1234, LAN IP address 192.168.1.1 etc. see

your User’s Guide for details).

ZyAIR G-2000 802.11g Wireless 4-port Router

2.2 The Front Panel

The PWR LED turns steady on when the power adaptor is connected. The SYS LED blinks while

performing system testing and then turns steady on if the testing is successful. The link LED and the ZyAIR

LED turn steady on while the wireless card on the ZyAIR is working. The LAN and WAN LEDs turn on, if

they are properly connected. Refer to the User’s Guide for more detailed LED descriptions.

ZyAIR LED

ZyAIR G-2000 802.11g Wireless 4-port Router

Table 1 Front Panel LED Description

LED COLOR STATUS DESCRIPTION

The ZyAIR is ready, but is not sending/receiving data through the

wireless LAN.

ZyAIR

Blue

Blinking

(Breathing)

The ZyAIR is sending/receiving data through the wireless LAN.

Off The ZyAIR does not have an Ethernet connection.

On The ZyAIR has a successful 10Mbps Ethernet connection.Green

Blinking The ZyAIR is sending/receiving data.

On The ZyAIR has a successful 100Mbps Ethernet connection.

LAN 1-4

Orange

Blinking The ZyAIR is sending/receiving data.

Off The ZyAIR does not have a WAN connection.

On The ZyAIR has a successful 10Mbps WAN connection.Green

Blinking The ZyAIR is sending/receiving data.

On The ZyAIR has a successful 100Mbps WAN connection.

WAN

Orange

Blinking The ZyAIR is sending/receiving data.

Off The ZyAIR is not ready or has malfunctioned.

Green On The ZyAIR is functioning properly.

SYS

Red Blinking The ZyAIR is rebooting.

On The ZyAIR is receiving power.PWR Green

Off The ZyAIR is not receiving power.

ZyAIR G-2000 802.11g Wireless 4-port Router

3 Setting Up Your Computer’s IP Address

Skip this section if your computer is already set up to accept a dynamic IP

address. This is the default for most new computers.

The ZyAIR is already set up to assign your computer an IP address. Use this section to set up your

computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254 range

with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can communicate with

your ZyAIR.

Your computer must have a network card and TCP/IP installed. TCP/IP should already be installed on

computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems. Refer to the Setting

Up Your Computer’s IP Address appendix in the User’s Guide for configuring the IP address in other

operating systems.

3.1 Windows 2000/NT/XP

1. In Windows XP, click Start, Control Panel. In Windows 2000/NT, click Start, Settings, Control

Panel.

2. In Windows XP, click Network Connections.

In Windows 2000/NT, click Network and Dial-up Connections.

3. Right-click Local Area Connection and then click Properties.

4. Select Internet Protocol (TCP/IP) (under the General tab in Windows XP) and click Properties.

5. The Internet Protocol TCP/IP Properties screen

opens (the General tab in Windows XP).

-To have your computer accept a dynamic IP address,

click Obtain an IP address automatically.

-If you want a static IP address, click Use the

following IP Address and fill in the IP address (use

one between192.168.1.2 and 192.168.1.254), Subnet

mask (255.255.255.0), and Default gateway

(192.168.1.1) fields.

Click Advanced.

ZyAIR G-2000 802.11g Wireless 4-port Router

6. Remove any previously installed gateways in the IP

Settings tab and click OK to go back to the Internet

Protocol TCP/IP Properties screen.

7. Click Obtain DNS server address automatically if

you do not know your DNS server IP address(es).

If you know your DNS server IP address(es), click Use

the following DNS server addresses, and type them

in the Preferred DNS server and Alternate DNS

server fields.

If you have previously configured DNS servers, click

Advanced and then the DNS tab to order them.

8. Click OK to close the Internet Protocol (TCP/IP)

Properties window.

9. Click OK to close the Local Area Connection

Properties window.

3.2 Checking/Updating Your Computer’s IP Address

1. In the computer, click Start, (All) Programs, Accessories and then Command Prompt.

2. In the Command Prompt window, type "ipconfig" and then press ENTER to verify that your

computer’s static IP address is in the correct subnet (in the range between 192.168.1.2 and

192.168.1.254 if using the default ZyAIR LAN IP address). Alternatively, to have the ZyAIR assign

your computer a new IP address (from the IP pool), make sure your ZyAIR is turned on, type

"ipconfig/renew" and then press ENTER.

3.3 Testing the Connection to the ZyAIR

The default IP address of the ZyAIR is 192.168.1.1.

1. Click Start, (All) Programs, Accessories and then Command Prompt.

2. In the Command Prompt window, type "ping” followed by a space and the IP address of the ZyAIR.

ZyAIR G-2000 802.11g Wireless 4-port Router

3. Press ENTER and the reply messages displays.

Your computer can now communicate with the ZyAIR using the LAN port.

4 Internet Access Setup Using the Web

Configurator Wizard

The Quick Installation Guide shows you how to use the web configurator Wizard

and introduces the ZyAIR’s key features. See your User’s Guide for configuration

details and background information on all ZyAIR features using the SMT (System

Management Terminal) and web configurator.

4.1 Accessing the ZyAIR via the Web Configurator

1. Launch your web browser. Enter “192.168.1.1” as the web site address.

C:\>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time=10ms TTL=254

Reply from 192.168.1.1: bytes=32 time<10ms TTL=254

Ping statistics for 192.168.1.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 10ms, Average = 2ms

C:\>

Default ZyAIR IP Address

Andere Handbücher für ZyAir G-2000

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications P-334WT Handbuch

ZyXEL Communications

ZyXEL Communications P-660RU-Tx Series Handbuch

ZyXEL Communications

ZyXEL Communications NBG4604 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL 110 Series Handbuch

ZyXEL Communications

ZyXEL Communications PRESTIGE 335 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS1100-16 - EDITION 1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX208M2W SERIES Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 623ME(-I) Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AX Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8924-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-3124F Handbuch

ZyXEL Communications

ZyXEL Communications P-660R-D Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Dimension GS-3012 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 100IH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AX7501-B0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX218M2W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4615 v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1202-T10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2612HNU-F1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660RU-T1 v3s Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1202-T10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 100L Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XMG3512-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 791R Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise