ZyXEL Communications Prestige 642M series Beilage

ZyXEL Communications, Inc.______________________________________________Prestige Application Notes

BRG00001: 1

Last modified: December 20, 1996

Bridging IPX Between Two Prestiges

Note: The IPX network numbers shown above are examples only!

This configuration note explains how to set up a workstation on a network to use a Prestige to make a

connection to another Prestige to bridge IPX. In this configuration, the workstation has NetWare client

software so that you will be able to log into the NetWare server on the remote network. There will be

three items that you need to set up. These are the workstation and the two Prestiges.

I. Workstation Setup (NetWare Client)

To set up the workstation (W/S), you will need to set the following parameters:

• IPX Frame Type- First determine the frame type that the NetWare server that you wish to login

to is using, and set the same frame type on the NetWare client workstation.

• Server Name- In some cases, you may need the name that has been configured for the NetWare

server you wish to login to. In the previous example, that would be ‘Server_1’.

The procedure for configuring these parameters for your workstation may differ depending on the

type of IPX client software you are using on your workstation. If you are unfamiliar with how to set

these parameters, you can refer to the technical notes corresponding to your software.

• DOS workstation w/ NetWare Client (VLM) software

• Windows 95/NT LAN Setup

II. Prestige 2 Setup

In order to configure the Prestige on the NetWare client side for this application, make sure you have

the following menus configured correctly.

Note that the fields are indicated inboldtype.

NetWare

Client

Prestige 2

Prestige 1

NetWare

Server

ZyXEL Communications, Inc.______________________________________________Prestige Application Notes

BRG00001: 2

Menu 1:

Menu 1 - General Setup

System Name= Pres_2

Location= San Jose

Contact Person's Name= CC

Route IP= No

Route IPX= N/A

Route AppleTalk= N/A

Bridge= Yes

Press ENTER to Confirm or ESC to Cancel:

• In menu 1, make sure theBridge field is set to ‘Yes’.

Menu 2:

Menu 2 - ISDN Setup

Switch Type= Northern Telecom Custom

B Channel Usage= Switch/Switch

1st Phone #= 5551212

SPID #= 408555121200

Analog Call= Modem

2nd Phone #= 5551213

SPID #= 408555121300

Analog Call= Voice

Press ENTER to Confirm or ESC to Cancel:

• In menu 2, set your switch type, phone numbers, and SPIDs (if necessary).

• After saving this menu, you will be asked if you want to perform an ISDN connection test. Select

‘Yes’ to perform the test. If the test fails, refer to the User’s Manual Troubleshooting section for

corrective action.

ZyXEL Communications, Inc.______________________________________________Prestige Application Notes

BRG00001: 3

Menu 3.5:

Menu 3.5 - Bridge Ethernet Setup

Handle IPX= Client

Press ENTER to Confirm or ESC to Cancel:

• Set Handle IPXto ‘Client’.

Menu 11:

Menu 11 - Remote Node Profile

Rem Node Name= IPX_user Route= None

Active= Yes Bridge= Yes

Call Direction= Outgoing

Edit PPP Options= No

Incoming: Rem IP Addr= N/A

Rem Login= Edit IP/IPX/AppleTalk/Bridge= Yes

Rem Password=

Rem CLID= Telco Option:

Call Back= N/A Transfer Rate= 64K or 56K

Outgoing: Session Options:

My Login= username Input Filter Sets=

My Password= ****** Output Filter Sets=

Pri Phone #= 5551212 Call Filter Sets=

Sec Phone #= Idle Timeout(sec)= 300

Press ENTER to Confirm or ESC to Cancel:

• The Call Directionshould be set to ‘Outgoing’.

• Make sure the remote node is enabled by settingActive to ‘Yes’.

• My Loginand My Passwordis the login information that this Prestige will use to connect to the

remote router.

• The Pri Phone #field should be set to the correct phone number to dial.

•Routeshould be set to ‘None’

• The Bridge field should be set to ‘Yes’.

• Set Edit IP/IPX/AppleTalk/Bridgeto ‘Yes’ and press ENTER.

ZyXEL Communications, Inc.______________________________________________Prestige Application Notes

BRG00001: 4

Menu 11.2:

Menu 11.2 - Remote Node Network Layer Options

IP Options: AppleTalk Options:

Rem IP Addr: Dial-On-Query= N/A

Rem Subnet Mask= N/A Rem LAN Net Range= N/A

My WAN Addr= N/A 1st Zone Name= N/A

Metric= N/A 2nd Zone Name= N/A

Private= N/A My WAN Net #= N/A

RIP= N/A My WAN Node ID= N/A

IPX Options: Metric= N/A

Dial-On-Query= N/A ZIP Timeout(min)= N/A

Rem LAN Net #= N/A

My WAN Net #= N/A Bridge Options:

Hop Count= N/A Dial-On-Broadcast= Yes

Tick Count= N/A Ethernet Addr Timeout(min)= 0

W/D Spoofing(min)= N/A

SAP/RIP Timeout(min)= N/A

Enter here to CONFIRM or ESC to CANCEL:

• Dial-On-Broadcastshould be ‘Yes’.

III. Prestige 1 Setup

In order to configure the Prestige on the NetWare server side, make sure you have the following

menus configured correctly.

Note that the fields are indicated inboldtype.

Menu 1:

Menu 1 - General Setup

System Name= Pres_1

Location= San Jose

Contact Person's Name= CC

Route IP= No

Route IPX= N/A

Route AppleTalk= N/A

Bridge= Yes

Press ENTER to Confirm or ESC to Cancel:

• In menu 1, make sure theBridge field is set to ‘Yes’.

ZyXEL Communications, Inc.______________________________________________Prestige Application Notes

BRG00001: 5

Menu 2:

Menu 2 - ISDN Setup

Switch Type= Northern Telecom Custom

B Channel Usage= Switch/Switch

1st Phone #= 5551214

SPID #= 408555121400

Analog Call= Modem

2nd Phone #= 5551215

SPID #= 408555121500

Analog Call= Voice

Press ENTER to Confirm or ESC to Cancel:

• In menu 2, set your switch type, phone numbers, and SPIDs (if necessary).

• After saving this menu, you will be asked if you want to perform an ISDN connection test. Select

‘Yes’ to perform the test. If the test fails, refer to the User’s Manual Troubleshooting section for

corrective action.

Menu 3.5:

Menu 3.5 - Bridge Ethernet Setup

Handle IPX= Server

Press ENTER to Confirm or ESC to Cancel:

• Set Handle IPXto ‘Server’.

ZyXEL Communications, Inc.______________________________________________Prestige Application Notes

BRG00001: 6

Menu 11:

Menu 11 - Remote Node Profile

Rem Node Name= IPX_user Route= None

Active= Yes Bridge= Yes

Call Direction= Incoming

Edit PPP Options= No

Incoming: Rem IP Addr= N/A

Rem Login= username Edit IP/IPX/AppleTalk/Bridge= Yes

Rem Password= ******

Rem CLID= Telco Option:

Call Back= N/A Transfer Rate= 64K or 56K

Outgoing: Session Options:

My Login= Input Filter Sets=

My Password= Output Filter Sets=

Pri Phone #= N/A Call Filter Sets=

Sec Phone #= N/A Idle Timeout(sec)= 300

Press ENTER to Confirm or ESC to Cancel:

• The Call Directionshould be set to ‘Incoming’.

• Make sure the remote node is enabled by settingActive to ‘Yes’.

• Rem Loginand Rem Passwordis the login information that this Prestige will expect from the

remote router.

•Routeshould be set to ‘None’

• The Bridge field should be set to ‘Yes’.

• Set Edit IP/IPX/AppleTalk/Bridgeto ‘Yes’ and press ENTER.

Menu 11.2:

Menu 11.2 - Remote Node Network Layer Options

IP Options: AppleTalk Options:

Rem IP Addr: Dial-On-Query= N/A

Rem Subnet Mask= N/A Rem LAN Net Range= N/A

My WAN Addr= N/A 1st Zone Name= N/A

Metric= N/A 2nd Zone Name= N/A

Private= N/A My WAN Net #= N/A

RIP= N/A My WAN Node ID= N/A

IPX Options: Metric= N/A

Dial-On-Query= N/A ZIP Timeout(min)= N/A

Rem LAN Net #= N/A

My WAN Net #= N/A Bridge Options:

Hop Count= N/A Dial-On-Broadcast= No

Tick Count= N/A Ethernet Addr Timeout(min)= 0

W/D Spoofing(min)= N/A

SAP/RIP Timeout(min)= N/A

Enter here to CONFIRM or ESC to CANCEL:

• Dial-On-Broadcastshould be ‘No’.

Andere Handbücher für Prestige 642M series

Dieses Handbuch passt für folgende Modelle

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications P650HW-DE Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-419N v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2602HL Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications O2 HomeBox 6641 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3312-M432 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2812HNU-51c Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2602H-D1A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS1200 SERIES Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660RU-Tx v3 SERIES Handbuch

ZyXEL Communications

ZyXEL Communications NXC2500 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 642M series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-3000H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2602H-D1A Referenzhandbuch

ZyXEL Communications

ZyXEL Communications ES-105A/108A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XS3700 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-417N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 650 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R-T1 v3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications SSL 10 Handbuch

ZyXEL Communications

ZyXEL Communications DIMENSION ES-1124 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PM7320-B0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8825 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R-T1 v3s Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-791R v3 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung