ZyXEL Communications PRESTIGE 128 Bedienungsanleitung

Prestige 128

Getting Started

ZyXEL

ACCESSING INTERNET & INTRANET

Version 1.0

(Jan. 1996)

About This Manual

Getting Started covers the basic information you need to

install and configure your Prestige 128 for connection to

the Internet through an ISP (Internet Service Provider).

For more details on this and other applications, please

refer to the Prestige 128 User’s Manual.

Before You Start

To install your Prestige, you will need the following items

in addition to the contents of this package:

• An ISDN telephone line installed by your telephone

company.

• An Ethernet connection to your computer.

• A computer equipped with communications software.

The communications software must be configured to the

following parameters:

• VT100 terminal emulation

• 9600 Baud rate

• None parity, 8 Data bits, 1 Stop bit

Please make sure you have all of these components before

you attempt to install your Prestige.

Installing Your Prestige

Figure 1 shows a diagram of the rear panel of the Prestige

128. To help avoid problems, refer to this diagram when

you are connecting the cables to your unit.

Warning: If the wrong cable is used, your Prestige may be

damaged.

Connecting the RS-232 Cable

One white RS-232 cable is included with your router. To

connect the RS-232 cable, first click open the door on the

right panel to reveal the port. Slide one end of the RS-232

cable (looks like a telephone jack) into the port until the

retainer clicks into place. Connect the other end of the

RS-232 cable to the serial port (COM1, COM2, or any

other COM port) of your computer.

Connecting ISDN Line

Plug one end of yourblackISDN phone line into the

socket on the rear panel of the Prestige labeled ‘ISDN’

and the other end into the ISDN wall jack.

Connecting Ethernet Cable

The Prestige supports two types of Ethernet connections.

The connection procedure differs for each one; follow the

one that is appropriate for your installation.

UTP

The UTP port is used to connect to a 10BaseT network.

10BaseT networks use Unshielded Twisted Pair (UTP)

cable and RJ-45 connectors that look like a big telephone

plug with 8 pins. Two types of gray Ethernet cables come

with the package:

• Straight through cable (P/N 57-110-004290):

Connects your Prestige to a 10BaseT hub.

• Crossover cable (P/N 57-011-208400): Connects

your Prestige to your computer directlywithout a

hub.

Warning: If this cable is used to connect ISDN, it may

damage your Prestige.

AUI

The AUI port (the connector with 15 pins) is used to

connect the Prestige to a 10Base5 (thicknet) network.

If you have a 10Base2 network using BNC connectors and

thin coaxial cables, you will need a transceiver between

the AUI port and the 10Base2 cabling.

Figure1Diagram of Right and Rear Panel of the Prestige

Connecting the Power Adapter

Plug a 16VAC 1200mA power adapter into the outlet on

the rear panel of the Prestige labeled ‘POWER’.

Configuring Your Prestige

After you have successfully connected your Prestige, you

can use your computer’s communications software to

configure your unit. Simply select the COM port to which

your Prestige is connected and turn the power on. After

the initial data, you will be asked to enter the password.

Enter the default passwordof “1234” and press enter.

This will automatically send you to the SMT (System

Management Terminal) which will be used to configure

the Prestige.

Fill in the fields as described in the following sections. It

is important to note that this set of configuration

instructions provides the minimum fields you need to set

in order to connect to the Internet.

Subscribing to a Class C or Single

User Internet Account

Menu 1 - General Setup

1. System Name- give Prestige 128 a name

2. Route IP- select ‘Yes’

Please see Chapter 3 in the User’s Manual for more

detailed information.

Menu 2 - ISDN Setup

Note: The 128 uses an S/T interface while the 128U uses

a U interface.

Gather the following information from your ISDN service

provider (telephone company).

North American ISDN Setup

1. Switch Type- Select your ISDN switch type.

2. B Channel Usage- In most cases, this will be

‘Switch/Switch’. If you are only using one B channel

(e.g., your Prestige is sharing the ISDN BRI line with

another device on the S/T bus). Then select

‘Switch/Unused’.

3. 1st Phone #- Enter the 1st phone number given to

you by your telephone company.

4. SPID #-Enter the 1st Service Profile Identifier if

your telephone company provides this number.

5. 2nd Phone #- Enter the 2nd phone number if your

telephone company provides this number.

6. SPID #-Enter the 2nd Service Profile Identifier if

your telephone company provides this number.

DSS1 & 1TR6 ISDN Setup

1. Switch Type -This field is fixed as the DSS1 or

1TR6.

2. B Channel Usage- This field is fixed as the

Switch/Switch.

3. ISDN Data &Subaddress -Enter the telephone

number andsubaddress assigned to the ISDN data

call for the Prestige.

4. A/B Adapter 1 &Subaddress -Enter the telephone

number andsubaddress assigned totheA/B Adapter 1

(POTS port 1) call for the Prestige.

5. A/B Adapter 2 &Subaddress -Enter the telephone

number andsubaddress assigned to the A/B Adapter

2 (POTS port 2) call for the Prestige.

6. Dial Prefix to Access Outside Line -Enter the

prefix number if the Prestige is connected to an ISDN

PABX.

7. PABX Number (with S/T Bus Number)- Enter the

S/T bus number if the Prestige is connected to an

ISDN PABX.

Please see Chapter 3 in the User’s Manual for more

detailed information and other capabilities such as the

PHONE ports (known as POTS ports in North America or

A/B Adapters in Europe).

Menu 3.1 - TCP/IP Ethernet Setup

Get the information for this menu from your network

administrator.

1. IP Address- Enter the IP address of the Prestige

Please see Chapter 3 in the User’s Manual for more

detailed information.

Menu 4 - Internet Access Setup

Get the information for this menu from your Internet

Service Provider (“ISP”).

1. ISP's Name- Enter the name of the Internet Service

Provider.

2. ISP's IPAddr- Leave this field blank if you don’t

know the IP address of yourISP’s gateway.

Otherwise, enter it here.

3. Pri(mary) Phone #- Enter the ISP's primary phone

number given to you by your Internet Service

Provider.

4. My Login- Enter the user ID given to you by your

Internet Service Provider.

5. My Password- Enter the password given to you by

your Internet Service Provider.

6. Single User Account -Set this field set to ‘Yes’ to

enable the Single User Account feature. Otherwise,

set this field to ‘No’. Please see Chapter 4 for a more

detailed discussion of Single User Account.

7. Single User Account: IPAddr(mandatory if Single

User Account is set to ‘Yes’) - If your ISP assigns a

dynamic IP address to you, enter 0.0.0.0. Otherwise,

enter the IP address assigned to you by your ISP.

8. Single User Account: Server IPAddr. If you have a

server on the LAN, e.g., a web server, that provides

services to the outside world, enter the IP address of

that station in this field.

9. Telco Options: Transfer Rate -This field (which

only applies to outgoing calls) controls the rate at

which the data is transferred between your Prestige

and the Internet.

After you enter the above information, you can perform a

test to test the Internet connection.

For other applications such as using a phone connected to

the PHONE port, or using Prestige as an IPX router,

please see Prestige User’s Manual.

ZyXELZyXELCommunications Co.

6, Innovation Road II,

Science-Based Industrial Park

Hsinchu, Taiwan 300, R.O.C.

Tel: 886-3-5783942 Fax: 886-3-5782439

E-Mail:[email protected]

[email protected]

ZyXELZyXELCommunications, Inc.

4920 E. LaPalma Ave., Anaheim, CA 92807

Tel: 714-693-0808 Fax: 714-693-8811

E-mail:[email protected]

URL:http ://www.zyxel.com

Andere Handbücher für PRESTIGE 128

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications P-334W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XGS3700-24HP Betriebsanleitung

ZyXEL Communications

ZyXEL Communications MES3500-24F Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS-4012F Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1302-T11C Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications O2 HomeBox 6641 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NU-AP699E9N3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 642 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P964 APR 964 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL Dimension ES-2724 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AX Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2802HW-I Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VES-1616F-44 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-105/ES-108 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-791R V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Dimension ES-108P Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2602H-D1A Referenzhandbuch

ZyXEL Communications

ZyXEL Communications O2 HomeBox Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2812HNU-51c Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6615 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL EES-1024AF Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4604 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications p-2602hw Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung