ZyXEL Communications Prestige 2602R Series Bedienungsanleitung

Prestige 2602R Series

ADSL VoIP IAD

Quick Start Guide

Version 3.40

7/2005

Prestige 2602R Series Quick Start Guide

Overview

The Prestige P2602R ADSL VoIP IAD (Integrated Access Device) is an ADSL router with two phone ports for

Voice over IP (VoIP) calls.

See the User’s Guide for more information on all features.

The following figure shows your Prestige (A) connected to the Internet.

1 Hardware Connections

You need the following before you start:

Note: You may need your Internet access and voice account information.

Prestige Computer Telephone Power Adaptor

Ethernet Cable Telephone Cable

Prestige 2602R Series Quick Start Guide

Do the following to make hardware connections for initial setup.

1DSL: Connect the Prestige to a telephone jack using the included telephone wire.

2LAN: Use an Ethernet cable to connect a computer or external hub to the LAN port for initial configuration

and/or Internet access.

3 Phone 1-2: Connect one or more analog telephones to these ports using telephone wires. These are FXS

(Foreign Exchange Station) ports.

4POWER:Use the included power adaptor to connect this power socket to an appropriate power source.

After you've made the connections, set the power switch to the "ON" side to turn on the Prestige.

The PWR/SYS LED flashes during system startup and stays on after the system self-tests are successful. The

LAN and DSL/PPP LEDs turn on if the LAN and DSL ports are properly connected (they flash when sending

or receiving data). See your User's Guide for detailed LED descriptions.

2 Initial Configuration

You may configure the Prestige for Internet access in any one of these ways:

• Zero Configuration

Prestige 2602R Series Quick Start Guide

•Web Configurator Internet Access Wizard

You will need your Internet access information such as user name and password if given by your ISP.

2.1 Zero Configuration

Launch your web browser and navigate to any web

site (for example, www.zyxel.com). The Prestige

automatically detects and configures your Internet

connection. This may take about two minutes.

If you have a PPPoE or PPPoA

connection, a screen displays

prompting you to enter your

Internet account information.

Enter the username, password

and/or service name exactly as

provided. Click Apply.

Note: Zero Configuration can only automatically configure the device for Internet access if you are

using PPPoE, PPPoA or ENET ENCAP encapsulation with a dynamically-assigned IP address

from your ISP.

If you’re not using these Internet access settings, then use the web configurator Internet Access

Wizard to manually configure the device.

If you want to set up a SIP account for VoIP calls, you should also configure the voice

configuration wizard screen (see Section 2.2.2 on page 6) or the Voice screen under Advanced

Setup.

ISP INFORMATION ENCAPSULATION METHOD YOU ARE USING

None RFC1483 in bridged mode with a dynamic IP address or

ENET ENCAP with a dynamic IP address

An IP address only RFC1483 in routing mode with a static IP address

A user name and password (and an IP address) PPPoA or PPPoE encapsulation (with a static IP address)

An IP address, subnet mask and a gateway IP

address

ENET ENCAP with a static IP address

Prestige 2602R Series Quick Start Guide

After the Prestige automatically detected and configured the Internet connection, if you connect

the Prestige to another DSL line with different VPI and VCI, zero configuration will not work and

you need to reset the Prestige to the factory defaults or manually configure the Prestige for

Internet access.

2.2 Web Configurator Internet Access Wizard

2.2.1 Accessing the Web Configurator

1Launch your web browser. Enter “192.168.1.1” as the web site address.

Note: If you do not see the next screens, then please read Section 3.1 on page 12.

2Click Login.

3Type a new password (retype it to confirm) and click Apply. Otherwise click Ignore. You then see the main

web configurator screen.

4In the Site Map screen, click Connection Setup.

Prestige 2602R Series Quick Start Guide

2.2.2 Internet Access Setup

1Configure the Internet access settings in this step. The wizard screens vary depending on the Mode and

Encapsulation you chose in the first wizard screen.

RFC 1483

A) Select Routing if your ISP gave

you an IP address and allows

multiple computers to share an

Internet account. Otherwise,

select Bridge. Then select RFC

1483.

B) Click Next.

C) If you select Routing, enter the

IP address given by your ISP.

D) If you select Routing,select SUA

Only when you have one public

IP address, Full Feature when

you have more than one public IP

address (for translation) or None

to disable NAT.

E) Click Next.

Prestige 2602R Series Quick Start Guide

ENET ENCAP

A) Select Routing, then ENET

ENCAP.

B) Click Next.

C) If your ISP gave you an IP

address, subnet mask and

a gateway address, select

Static IP address and

enter them. Otherwise,

select Obtain IP Address

Automatically.

D) Select SUA Only if you

have one public IP

address, Full Feature if

you have more than one

public IP address (for

translation) or None to

disable NAT.

E) Click Next.

PPPoE

A) Select Routing, then

PPPoE.

B) Click Next.

C) Enter the service name,

username and password

given by your ISP.

D) If your ISP gave you an IP

address, select Static IP

address and enter it.

Otherwise, select Obtain IP

Address Automatically.

E) Select Nailed-Up

Connection to have your

connection up all the time.

Otherwise, select Connect

on Demand and specify an

idle time-out period (in

seconds) in the Max. Idle Timeout field.

F) Select SUA Only if you have one public IP address, Full Feature if you have more than one public IP

address (for translation) or None to disable NAT.

G) Click Next.

Prestige 2602R Series Quick Start Guide

PPPoA

A) Select Routing if your ISP

allows multiple computers

to share an Internet

account. Otherwise, select

Bridge. Then select

PPPoA.

B) Click Next.

C) Enter the username and

password given by your

ISP.

D) If your ISP gave you an IP

address, select Static IP

address and enter it.

Otherwise, select Obtain IP

Address Automatically.

E) Select Nailed-Up

Connection to have your

connection up all the time.

Otherwise, select Connect on Demand and specify an idle time-out period (in seconds) in the Max. Idle

Timeout field.

F) If you select Routing, select SUA Only when you have one public IP address, Full Feature when you

have more than one public IP address (for translation) or None to disable NAT.

G) Click Next.

2 Voice Configuration: Fill in the fields with information from your voice service provider. Leave the default

settings in fields for which no information was provided (except if otherwise specified).

Note: You should have a voice account already set up.

This screen configures SIP account 1. Use the VoIP screens to configure SIP account 2.

Prestige 2602R Series Quick Start Guide

A) Select the Active check box.

B) If you have a SIP account like

1234@VoIP-provider.com,“1234”

would be the SIP Number and “VoIP-

provider.com” would be the SIP

Service Domain.

C) Enter the SIP server IP address.

Enter the SIP server port number, if

not given, leave it set to the default.

D) If you have no registrar server

information, copy what you entered in

the SIP Server Address/Port fields.

E) Enter your SIP account user name

and password given by your voice

service provider.

F) If you want to show identification

information when you make VoIP

calls, select Send Caller ID.

G) Click Next.

3Verify your LAN, WAN

and SIP settings and

click Save Settings.

4The Prestige

automatically tests the

connection to the

computer(s) connected

to the LAN port. To test

the connection from the

Prestige to the ISP, click

Start Diagnose.

Otherwise click Return

to Main Menu to go

back to the main

screen.

Prestige 2602R Series Quick Start Guide

2.2.3 Media Bandwidth Management

1Click Media Bandwidth Mgnt. in the Site Map

screen to open the wizard screen.

A) Select Active to have the Prestige control the

bandwidth allocated to traffic going out through

the Prestige’s WAN or LAN port.

B) Select the services for which you want to

manage bandwidth.

C) Click Next.

2The Prestige automatically creates the

bandwidth class for each service you select.

A) Select High, Mid or Low priority to control the

distribution of bandwidth to selected services.

A service with High priority is given as much

bandwidth as it needs.

If you select services as having the same

priority, then bandwidth is divided equally

amongst those services.

Services not specified in bandwidth management are allocated bandwidth after all specified services

receive their bandwidth requirements. If the rules set up in this wizard are changed in the advanced

setup, then the service priority will be set to Others.

B) Click Finish.

Andere Handbücher für Prestige 2602R Series

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications 650 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications SSL 10 Handbuch

ZyXEL Communications

ZyXEL Communications IES-1248-51 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WSQ60 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WSR30 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6615 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PM7300-T0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XS3700 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX-200HW2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications STB-1001S3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R-T Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-3124F Handbuch

ZyXEL Communications

ZyXEL Communications P-2612HNU-F1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3302-M432 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R-T3 V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE7480-S905 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8324-B10A series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660RU-T1 v3s Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 652 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2812HNU-51c Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG3927-B 0A Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG318S Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications IES-5000 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung