ZyXEL Communications Prestige 623R-A1 Bedienungsanleitung

Prestige 623R-A1

ADSL Dual-link Router

Quick Start Guide

Version 3.40

August 2003

Prestige 623R-A1 ADSL Dual-link Router

Introducing the Prestige

The Prestige 623R-A1 ADSL Dual-link Router is the ideal all-in-one device for small networks connecting

to the Internet via ADSL. See your User’s Guide for more details on all Prestige features.

You should have an Internet account already set up and have been given most of the following information.

INTERNET ACCOUNT INFORMATION

Virtual Path Identifier (VPI): ____________

Virtual Channel Identifier (VCI): ____________

Multiplexing (VC-based or LLC-based): VC LLC

Your device’s WAN IP Address (if given): __________________

DNS Server IP Address (if given): Primary:_________________ Secondary: _________________

Encapsulation (or Protocol)

RFC 1483

ENET ENCAP Ethernet Encapsulation Gateway IP Address: ____________________

PPPoA User Name: ____________ Password: ____________

PPPoE (PPPoE) Service Name: ____________

User Name: ____________ Password: ____________

Hardware Connection

Rear Panel Connection

PORT CONNECTION

1. DSL Connect to a telephone jack using a telephone wire.

Prestige 623R-A1 ADSL Dual-link Router

PORT CONNECTION

2. LAN

10/100M

Use an Ethernet cable to connect to a computer for initial configuration. The port is auto-

negotiating (can connect at 10 or 100Mbps) and auto-sensing (automatically adjust to the

type of Ethernet cable you use (straight-through or crossover)).

3. POWER Connect to a power source using the power adapter for your region (see your User’s

Guide).

After you’ve made the connections, connect the power cable to a power supply and push in the power button

to turn on the Prestige. Look at the front panel LEDs.

USB The USB port is useful if you have a USB-enabled computer that does not have a network

interface card for attaching to your Ethernet network. Refer to the Installing USB Driver

section.

RESET You only need to use this button if you’ve forgotten the Prestige’s password. It returns the

Prestige to the factory defaults (password is 1234, LAN IP address 192.168.1.1 etc. see

your User’s Guide for details).

Front Panel LED

When the Prestige is turned on, the PWR LED turns on. The SYS and USB LEDs blink while performing

system testing. The SYS LED then turns steady on if the testing is successful. The appropriate LAN and/or

USB LEDs turn on if they are properly connected.

Prestige Factory Defaults

This Quick Start Guide provides a basic configuration that should be compatible with your home or small

office network setup. Refer to the User’s Guide for additional configuration instructions.

PRESTIGE FACTORY DEFAULTS

USB/LAN IP Address 192.168.1.1 Default User name admin

Subnet Mask 255.255.255.0 Default Password 1234

DHCP IP Pool 192.168.1.33 – 192.168.1.64

Prestige 623R-A1 ADSL Dual-link Router

Installing the USB Driver

System Requirement

• Windows 98 SE/Me/2000/XP

• An available USB port

DO NOT connect the USB port at this point.

Follow the steps for your version of operating system to install the USB driver.

For Windows 98 SE/Me

Screen shots for Windows Me are shown.

Step 1. Save your work and close all other Windows

applications.

Step 2. Insert the included CD and the main screen

pops up automatically.

Step 3. Double-click Install Driver on the

AutoPlay main screen.

Step 4. A Welcome dialog box displays, click Next.

Prestige 623R-A1 ADSL Dual-link Router

Step 5. Click Yes to agree to the license agreement.

Step 6. Click Finish and restart the computer when

prompted to complete the installation

Step 7. Plug the square end of the USB cable into the back of your Prestige and then plug the

rectangular end of the USB cable into the back of your computer. A window displays briefly,

indicating that the system has found a new hardware.

For Windows 2000/XP

Screen shots for Windows XP are shown.

Prestige 623R-A1 ADSL Dual-link Router

Step 1. Save your work and close all other

Windows applications.

Step 2. Insert the included CD and the main screen

pops up automatically.

Step 3. Double-click Install Driver on the

AutoPlay main screen.

Step 4. A ZyXEL USB Device - InstallShield

Wizard screen displays.

Step 5. Connect the USB port to the computer

when prompted. A window displays briefly,

indicating that the system has found a new

hardware.

Step 6. If a Security Warning screen displays,

click Yes to continue.

Prestige 623R-A1 ADSL Dual-link Router

Step 7. A Found New Hardware Wizard screen

displays. Click Cancel.

Step 8. Click OK in the ZyXEL USB Device

Setup Wizard screen to continue.

Step 9. When a Welcome dialog box displays, click

Next to continue.

Step 10. Click Yes to agree to the license agreement.

Prestige 623R-A1 ADSL Dual-link Router

Step 11. For Windows 2000: When a Digital Signature Not Found warning screen displays, click Yes

to continue.

For Windows XP: When a Hardware Installation warning screen displays as shown, click

Continue Anyway.

Step 12. Click Finish and restart the computer when prompted to complete the installation.

Verifying Your USB Installation

When your computer finishes rebooting, check the status

of the Prestige in the Device Manager window. Click

Start, Settings, Control Panel, System, Hardware and

then click Device Manager. (Steps may vary depending

on the version of Windows).

Verify the status of the Prestige under Network Adapter.

Check that there is no question mark on the device icon

for the Prestige.

Setting Up Your Computer’s IP Address

Skip this section if your computer is already set up to accept a dynamic IP

address. This is the default for most new computers.

The Prestige is already set up to assign your computer an IP address. Use this section to set up your

computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254 range

with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can communicate with

your Prestige.

Prestige 623R-A1 ADSL Dual-link Router

Your computer must have a network card and TCP/IP installed. TCP/IP should already be installed on

computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.

Windows 2000/NT/XP

1. In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control

Panel.

2. In Windows XP, click Network Connections.

In Windows 2000/NT, click Network and Dial-up Connections.

3. Right-click Local Area Connection and then click Properties.

4. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.

5. The Internet Protocol TCP/IP Properties screen opens

(the General tab in Windows XP).

-To have your computer accept a dynamic IP address,

click Obtain an IP address automatically.

-If you want a static IP address, click Use the following

IP Address and fill in the IP address (use one

between192.168.1.2 and 192.168.1.254), Subnet mask

(255.255.255.0), and Default gateway (192.168.1.1)

fields.

Click Advanced.

6. Remove any previously installed gateways in the IP

Settings tab and click OK to go back to the Internet

Protocol TCP/IP Properties screen.

7. Click Obtain DNS server address automatically if you

do not know your DNS server IP address(es).

If you know your DNS server IP address(es), click Use

the following DNS server addresses, and type them in

the Preferred DNS server and Alternate DNS server

fields.

If you have previously configured DNS servers, click

Advanced and then the DNS tab to order them.

Prestige 623R-A1 ADSL Dual-link Router

8. Click OK to close the Internet Protocol (TCP/IP)

Properties window.

9. Click OK to close the Local Area Connection

Properties window.

Refer to your User’s Guide for detailed IP address configuration for other Windows and Macintosh

computer operating systems.

Checking/Updating Your Computer’s IP Address

1. In the computer, click Start, (All) Programs, Accessories and then Command Prompt.

2. In the Command Prompt window, type "ipconfig" and then press ENTER to verify that your

computer’s static IP address is in the correct subnet (in the range between 192.168.1.2 and

192.168.1.254 if using the default Prestige LAN IP address). Alternatively, to have the Prestige assign

your computer a new IP address (from the IP pool), make sure your Prestige is turned on, type

"ipconfig /renew" and then press ENTER.

Testing the Connection to the Prestige

1. Click Start, (All) Programs, Accessories and then Command Prompt.

2. In the Command Prompt window, type "ping” followed by a space and the IP address of the Prestige

(192.168.1.1 is the default).

Andere Handbücher für Prestige 623R-A1

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications P-2900-4HB Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NR2101 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3301-PLUS Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 623R-T Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3302-M432 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 335 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications UAG5100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-420N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1202-T10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8825-T50 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 645M-A1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 650H - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2602HW-C Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EX3301-TO Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-791R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2302R-P1 Series Referenzhandbuch

ZyXEL Communications

ZyXEL Communications LTE Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 650R-31/33 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-335WT Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications SSL 10 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6716 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4604 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4615 v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-791R V2 Handbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung