ZyXEL Communications ZyWALL 110 Series Handbuch

1/9

www.zyxel.com

ZLD Initial Setup (4.25 Firmware)

This guide will provide initial setup instructions to get the ZyWALL/USG connected to

the internet.

Supported Devices

ZyWALL 110 –Firmware version 4.25 and newer

ZyWALL 310 –Firmware version 4.25 and newer

ZyWALL 1100 –Firmware version 4.25 and newer

USG40 –Firmware version 4.25 and newer

USG40W –Firmware version 4.25 and newer

USG60 –Firmware version 4.25 and newer

USG60W –Firmware version 4.25 and newer

USG110 –Firmware version 4.25 and newer

USG210 –Firmware version 4.25 and newer

USG310 –Firmware version 4.25 and newer

USG1100 –Firmware version 4.25 and newer

USG1900 –Firmware version 4.25 and newer

USG20-VPN –Firmware version 4.25 and newer

USG20W-VPN –Firmware version 4.25 and newer

Scenario

This guide covers first time setup for internet access on ZyWALL (ZLD)

routers.

2/9

www.zyxel.com

Initial Setup

Before we begin the internet (WAN) setup on the ZyWALL router, the

following steps need to be completed.

1. Unpack the ZyWALL.

2. Connect the power supply (power cord) to the ZyWALL.

3. Press the power button on the ZyWALL to turn the device ON

(router takes 3-4 minutes to power up).

4. Connect a computer to a LAN1 port on the ZyWALL, P2.

5. Connect the DSL/Cable modem to the ZyWALL, P1.

Accessing the WebUI

To access the ZyWALL’s web configuration page please open a web

browser on your computer (Internet Explorer, Mozilla Firefox, Google

Chrome, etc.). On the address bar please type http://192.168.1.1 to

access the WebUI.

When prompted for user credentials, type admin for the “User Name”

and 1234 for the “Password”. Click the LOGIN button to enter the

WebUI.

3/9

www.zyxel.com

Note: If the default password has been changed, use the new password to login. If this is the first time

setting up the device and it is not accepting the “1234” password please press the RESET button on the

device (located in rear panel) and hold it down for 10-15 seconds.

The following screen will prompt to update the administrator password.

Enter a new administrative password and click the Apply button to save

the change.

Click Ignore to keep the default password (1234) and continue with the

setup.

4/9

www.zyxel.com

WAN Setup Wizard

The initial setup wizard will appear when logging-in to the ZyWALL’s

WebUI for the first time. Follow the prompts to setup the WAN port

connection. Click Next to run the wizard setup for internet access.

Note: If the “Installation Setup Wizard” does not appear when you login you can still run the wizard manually.

Please refer to the “Troubleshooting Tips” at the end of this guide.

Set the ISP Parameters for the internet connection and IP Address

Assignment. Click Next to continue the setup wizard.

ISP Parameters: Encapsulation options include Ethernet, PPP over Ethernet (PPPoE),

and PPTP. If you are unsure of the encapsulation parameters used by your ISP, leave

5/9

www.zyxel.com

this option set to “Ethernet”.

IP Address Assignment: Most ISP’s provide a dynamic IP address to residential

subscribers. Set the IP Address Assignment to “Auto” to automatically receive IP

address settings from your ISP. If you are paying for a fixed IP (static IP) please set the

IP Address Assignment option to “Fixed” and have your fixed IP info ready to type in on

the next screen.

This screen displays a summary or the “ISP Parameters” and “IP Address

Assignment” settings you selected on the previous screen. Click Next

to save the settings.

Note: Please be sure to verify that the settings are correct.

Once the wizard is done configuring the ZyWALL with the settings you

selected for the ISP parameters, click Next to finalize the setup.

Click Next to continue to the Registration option.

6/9

www.zyxel.com

Note: The ZyWALL includes a 30-day trial of UTM services (Anti-virus, IDP/AppPatrol and Content Filter).

Not all services are available on all ZyWALL/USG models.

Click the Register button to complete the device registration with

MyZyXEL. Registering the device is necessary to be able to download

future firmware releases for ZLD appliances running firmware 4.25 and

newer.

Clicking the button will open a new tab to the registration page. Login

to your MyZyXEL account or create a new account if you don’t

currently have one. Once logged into your MyZyXEL account click

Next to run through the device registration.

Click the Activate All button to register available UTM trials.

7/9

www.zyxel.com

Once this process is complete close the window or click on the

ZyWALL/USG WebUI tab to complete the setup.

Click the Refresh button to have the ZyWALL/USG contact the MyZyXEL

server to verify registration.

The next screen will show UTM license activation, continue hitting Next

until you reach the Wireless Settings option. At this point click Finish to

end the wizard.

8/9

www.zyxel.com

9/9

www.zyxel.com

Troubleshooting

If internet access in not working after running the setup wizard:

1. Verify the ISP Parameters & IP Address Assignment settings with

your service provider.

2. Make sure that P1 (WAN Port) on the ZyWALL is connected to

the DSL/Cable modem.

3. If you are using a cable modem, the cache on the modem

will need to be reset. To reset the modem cache you can: (if

the cable modem also provides telephone service, DO NOT

run the reset procedure, contact your ISP for assistance)

•Press and hold down the RESET button for 15 seconds to

clear the cache.

•If the modem does not have a RESET button, power

down for 5 minutes to clear the cache. Remove the

power cable and battery backup (if applicable).

•Contact your cable internet provider to have them

RESET the modem from their end.

4. If you are using a DSL modem please verify that it is in bridge

mode. Most DSL modems are a modem/router combination,

it is highly recommended to contact the internet service

provider and have them place the modem in a bridge mode.

5. Reboot/Restart the ZyWALL.

6. Contact ZyXEL Technical Support for additional assistance.

Andere Handbücher für ZyWALL 110 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications Dimension ES-4124 L3 Handbuch

ZyXEL Communications

ZyXEL Communications PMG2005-T20B Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-2024A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-417N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2812HNU-51c Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660RU-Tx Series Handbuch

ZyXEL Communications

ZyXEL Communications Prestige 480 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PMG5317-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 128IMH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG5313-BXB SERIES Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications IES-1248-51 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-662H/HW(-I) Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL Dimension ES-2724 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 480 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-202H Plus v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications UAG4100 Handbuch

ZyXEL Communications

ZyXEL Communications P-791R V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-116P Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 128IMH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2602R-D1A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 971M Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-974H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-570U Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications IES-1000 - ANNEXE 7 Handbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung