ZyXEL Communications P-334WHD Bedienungsanleitung

P-334WHD

802.11g High Power Wireless Router with Dial up Modem

Quick Start Guide

Version 3.60

Edition 1

9/2006

Table of Contents

ENGLISH 3

DEUTSCH 21

ESPAÑOL 40

FRANÇAIS 58

ITALIANO 77

SVENSKA 96

繁體中文 114

ENGLISH

Overview

The P-334WHD is an IEEE 802.11b/g wireless broadband router with a four-port 10/100 Mbps switch and a

built-in 56K modem. The computers connected to the P-334WHD can share Internet access via either a

broadband (cable/DSL) modem or the built-in 56K modem. Alternatively, you can set up both connections and

use the dial-up connection (via the built-in modem) as a backup when the primary broadband WAN connection

is down. The P-334WHD also works as an access point (AP) or a Wi-Fi WAN router that allows you to access

the Internet via a wireless WAN connection.

You should have an Internet account already set up and have been given most of the following information.

Table 1 Internet Account Information

See your User’s Guide for background information on all features.

The following lists what you need to do:

1Hardware Connections

2Accessing the Web Configurator

3Operating Mode

4Connection Wizard Setup

Your device’s WAN IP Address (if given): ______________

DNS Server IP Address (if given): Primary _____________, Secondary ______________

Connection Type:

Ethernet Service Type: _______________________

User Name: ____________

Password: ____________

PPTP: User Name: ____________

Your WAN IP Address (if given) ____________

Connection ID (if required): ____________

Password: ____________

PPTP Server IP Address: ___________

or PPTP Domain Name: ___________

PPPoE (PPPoE) Service Name: ____________

User Name: ____________ Password: ____________

Modem

Dial-up

User Name: ____________

Phone Number: ________________

Password: ____________

ENGLISH

1 Hardware Connections

Do the following to make hardware connections for initial setup.

WAN Connection

Connect your modem to the WAN port using the cable that came with your modem.

LAN Connection

Connect your computer to a LAN port using the included Ethernet cable.

PHONE Connection

Connect the PHONE port to your telephone using a telephone wire.

LINE Connection

Connect the LINE port to a telephone wall jack using the included DSL cable (telephone wire).

POWER Connection

Use the included power adaptor to connect the POWER socket to an appropriate power source.

Note: When the dial-up connection is up, you cannot use the phone.

ENGLISH

The LEDs

2 Accessing the Web Configurator

1Launch your web browser. Enter “192.168.1.1” as the web site address.

Note: If the login screen does not display, check your browser’s security settings (see

Troubleshooting for details) or make sure your computer is set to receive an IP address

dynamically (see Set Up Your Computer’s IP Address).

Look at the top panel LEDs. When you

connect the power, the PWR LED blinks and

stays on once the device is ready.

The LAN, WAN and WLAN LEDs turn on if

the corresponding connections are properly

made.

2The Password window displays. Enter the

password (“1234” is the default) and click Login.

3Change the password in the screen that follows

and click Apply.

4Click Go to Wizard setup to set up your P-334WHD

(in router mode) for the first time.

Click Go to Advanced setup to use main menus to

configure advanced features, such as operating

mode.

ENGLISH

3 Operating Mode

The P-334WHD supports three operating modes: Router, Access Point and WiFi WAN Router.

Router (default): Select this mode if the P-334WHD is connected to a broadband DSL/cable modem. NAT

allows all LAN computers to access the Internet using the same public IP address.

WiFi WAN Router: In this mode, the P-334WHD works similarly as a Router, but uses a wireless WAN

connection via an access point (AP) or wireless router, instead of a wired connection via a DSL/cable modem.

In this mode, the P-334WHD does not allow network access to wireless clients (WLAN).

Access Point: In this mode, the P-334WHD works as a Router without routing features (such as NAT),

firewall, content filtering, etc.

When the P-334WHD is in Access Point or WiFi WAN Router mode, all LAN and WAN ports act as a hub.

If you want to configure the operating mode, click Maintenance > Sys OP Mode. See your User’s Guide for

more information about the operating modes.

Note: Use the wizard to configure the P-334WHD in Router mode. If you want to use the P-334WHD in

Access Point or WiFi WAN Router mode, use the main menus.

You can use the WAN dial-up connection only when the P-334WHD is in Router mode.

ENGLISH

4 Connection Wizard Setup

Note: The connection wizard is for setting up Internet access when the P-334WHD is in Router mode

only. If the P-334WHD is in Access Point or WiFi WAN Router mode, using the wizard will reset

the operating mode to Router mode (the default).

Internet Access Setup

Note: Enter the Internet access information exactly as given to you by your ISP in each wizard screen

and then click Next to continue or click Back to return to the previous screen.

Current screen information will be lost if you click Back.

STEP 1: System Information

STEP 2: Wireless LAN

Configure ONE of the following wireless security types on the P-334WHD:

•Auto security: Have the P-334WHD automatically generate a pre-shared key.

1After you log into the web configurator and click

Go to Wizard setup,choose your language from

the drop-down list box. Click Next.

2Click Next to proceed with the Connection Wizard.

1This screen is optional. You can just click Next.

•System Name is for identifying the P-334WHD.

You can enter your computer's "Computer Name".

• If you leave the Domain Name blank, the domain

name obtained by DHCP from the ISP is used.

ENGLISH

•None security: Have no wireless LAN security configured. If you do not enable any wireless security on your P-

334WHD, your network is accessible to any wireless networking device that is within range.

•Basic security: WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over the wireless net-

work. The higher the WEP Encryption, the higher the security but the slower the throughput.

•Extend (WPA-PSK or WPA2-PSK) security: Configure a Pre-Shared Key. Choose this option only if your wire-

less clients support WPA-PSK or WPA2-PSK respectively.

Note: The wireless clients and P-334WHD must use the same SSID, channel ID and WPA(2)-PSK (if

WPA(2)-PSK is enabled) or WEP encryption key (if WEP is enabled) for wireless communication.

Auto or No Wireless Security

A Enter a unique name to identify the P-334WHD in the wireless LAN.

B Select a wireless security level. Choose Auto or None.

C The P-334WHD automatically scans for and selects a channel not in use by a nearby device. The P-334WHD

and wireless client must use the same channel.

D If you select Auto and click Next, a screen pops up displaying the generated pre-shared key. Click OK to

continue. You can also view the generated pre-shared key in the Wireless LAN > General screen.

ENGLISH

Basic(WEP) Security

A Enter a unique name to identify the P-334WHD in the wireless LAN.

B Select Basic(WEP) security.

C The P-334WHD automatically scans for and selects a channel not in use by a nearby device. The P-334WHD

and wireless client must use the same channel.

D Select 64-bit, 128-bit or 256-bit from the WEP Encryption drop-down list.

E Select ASCII or Hex WEP key input method.

F You can create a WEP key by either:

Entering a Passphrase (up to 32 printable characters) and clicking Generate to have the P-334WHD

automatically generates four WEP keys.

Manually entering a key in each Key (1~4) field.

G Select one of the Key radio buttons to use as the default WEP key.

ENGLISH

Extend (WPA-PSK or WPA2-PSK) Security

STEP 3: WAN

The wizard attempts to detect which WAN connection type you are using.

If the wizard cannot detect a connection type, you must select ONE from the drop-down list box. Check with your

ISP to make sure you are using the correct type:

1Ethernet

2PPPoE

3PPTP

4Modem Dial-up.

A Enter a unique name to identify the P-334WHD in the wireless LAN.

B Select WPA-PSK or WPA2-PSK security.

C The P-334WHD automatically scans for and selects a channel not in use by a nearby device. The P-334WHD

and wireless client must use the same channel.

D Type a pre-shared key to have a more secure wireless connection than WEP encryption. Type from 8 to 63

case-sensitive ASCII characters. You can set up the most secure wireless connection by configuring WPA(2)

in the advanced wireless screen. You need to configure a RADIUS server to do this.

Andere Handbücher für P-334WHD

Inhaltsverzeichnis

Sprachen:

Andere ZyXEL Communications WLAN-Router Handbücher

ZyXEL Communications

ZyXEL Communications P-334U Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG318S Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications C1100Z Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-460N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-417N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 652H series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334WH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2302HWL-P1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications CellPipe 7130 RG Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6617 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4115 - V1.0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 660HW-D Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Draft 802.11n Wireless Broadband 1-NBG-415N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 3G Wireless Router NBG410W3G Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EX3301-TO Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PMG5317-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3301-M209 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE7240-M403 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE4506-M606 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige P-2802HWL-I1 Handbuch

ZyXEL Communications

ZyXEL Communications NBG-418N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG2105 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE2566-M634 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications FSG1100HN Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung