ZyXEL Communications ZyAir G-2000 PlusV2 Bedienungsanleitung

ZyXEL Confidential

ZyXEL

Firmware Release Note

ZyAIR G-2000PLUS v2

Release 3.60(AAF.1)C0

Date: June 15, 2006

Author: Watties Lin

360AAF1C0.RTF 1/10

ZyXEL Confidential

ZyXEL ZyAIR G-2000PLUS v2 Standard Version

release 3.60(AAF.1)C0

Release Note

Date: June 15, 2006

Supported Platforms:

ZyXEL ZyAIR G-2000PLUS v2

Versions:

ZyNOS Version: V3.60(AAF.1) | 06/15/2006 10:10:00

BootBase : V1.05 | 04/20/2004 10:36:26

Notes:

1. If Wireless Port Control (SMT Menu 23.4) is “Authentication Required”, G-2000PLUS v2 will enable

802.1x/WPA/WPA-PSK user authentication mechanism, a wireless user must associate G-2000PLUS v2

successfully before accessing network service. If Wireless Port Control is “No Authentication Required”,

G-2000PLUS v2 will allow all wireless users to access network service. If Wireless Port Control is “No

Access Allowed”, G-2000PLUS v2 will not allow wireless user to access network service.

2. If the Key Management Protocol is “WPA/WPA2”, then you have to configure RADIUS server and the

Authentication Databases will be “RADIUS only”.

3. G-2000PLUS v2 supports external and internal RADIUS server, both of them use the same setting page

(SMT Menu 23.2). The internal RADIUS server use EAP-PEAP/MS-CHAP-V2 to authenticate the client.

If internal RADIUS server is desired, the server address is “127.0.0.1”, and shared secret is “don’t care”.

“Don’t care” means whatever user key in, if server address is “127.0.0.1”, G-2000PLUS v2 will use

default shared secret “1234”. But leave blank is exception.

4. The Local User Database does not support key generation for 802.1x dynamic web key and WPA

pairwise/group key.

5. As a wireless client roams from one wireless AP to another, it must perform a full 802.1X authentication

with each wireless AP. WPA2 allows the wireless client and the wireless AP to cache the results of a full

802.1X authentication so that if a client roams back to a wireless AP with which it has previously

authenticated, the wireless client needs to perform only the 4-way handshake and determine new pairwise

transient keys. In the Association Request frame, the wireless client includes a PMK identifier that was

determined during the initial authentication and stored with both the wireless client and wireless AP's

PMK cache entries. PMK cache entries are stored for a finite amount of time, as configured on the

wireless client and the wireless AP. So wireless client may reconnect to AP with error user name or

password.

Known Issues:

360AAF1C0.RTF 2/10

ZyXEL Confidential

CI Command List

Features:

Modification in 3.60(AAF.1)C0 | 06/15/2006

1. [FEATURE CHANGED]

Convert to FCS version.

Modification in 3.60(AAF.0)C0 | 05/09/2006

1. [FEATURE CHANGED]

Convert to FCS version.

Modification in 3.60(AAF.0)b4 | 05/03/2006

1. [BUG FIXED]

Symptom: Wireless Power Saving issue.

Condition: When wireless station (G-162, Intel 2200BG or Conexant-3890) power saving enable, and

connect to G-2000plus v2 with no security mode, nothing to do (no ping no FTP no...), more than 20

minutes, the wireless station can't ping to DUT.

SPRID: 60424865

2. [BUG FIXED]

Symptom: Port change to check SNMP service works with Access setting (LAN & WAN / Disable /

LAN / WAN) works failed.

Condition: 1) Encapsulation is Ethernet, and disables Firewall.

2) Remote MGMT/ SNMP service access = all.

3) LAN & WAN host access G-2000plus v2 via SNMP port 161 successful.

4) Change port 161 to 1610.

5) LAN & WAN host access G-2000plus v2 via port 1610 failed.

SPRID: 60425015

3. [BUG FIXED]

Symptom: Spoof Mac addresses issue.

Condition: In wizard, whether you use Ethernet/PPPoE/PPTP to make IP address, if you choose ”spoof

Mac address”, the device will exception.

SPRID: 60425978

4. [BUG FIXED]

Symptom: Local database user account can pass the authentication when using RADIUS only.

Condition: 1) In eWC->Advanced->Wireless: choose security as “802.1X+NO WEP” and authentication

database as “RADIUS only”.

2) In eWC->Advanced->AUTH. Server->Trusted User: add one active user “1234”.

3) Wireless STA can use “1234” to pass the authentication.

SPRID: 060310888

5. [BUG FIXED]

Symptom: WPA2-PSK (WPA2) mixed mode with WPA-PSK (WPA) station issue. If G-2000plus v2

configure with WPA2-PSK (WPA2) mixed mode, and the station which configure with WPA2-PSK

(WPA2) connect to device first, then the other station that configure with WPA-PSK (WPA) will not

connection any more.

Condition: 1) Load default first.

360AAF1C0.RTF 3/10

ZyXEL Confidential

2) Configure device with WPA2-PSK (WPA2) mixed mode, and STA1 (Intel 2200BG) configure with

WPA2-PSK (WPA2) and connect to device first, then STA2 (Conexant wireless card) configure with

WPA-PSK (WPA) try to connect with device, but STA2 always can't connect.

SPRID: 60428284

6. [FEATURE ENHANCED]

Extend share secrets of authentication and accounting from length 31 to 128.

SPRID: 60426109

7. [FEATURE ENHANCED]

Add a rule of default server (0.0.0.0) in address mapping.

SPRID: 60427229

Modification in 3.60(AAF.0)b3 | 04/20/2006

1. [BUG FIXED]

Symptom: System crash when user telnet in and modify configuration.

Condition: Copy a long character string (ex: 12345678901234567890123456789012), telnet to

G-2000plus v2, then paste the string in any item (Ex System name or domain name), system will crash.

SPRID: 60414066

2. [BUG FIXED]

Symptom: Conexant chipset wireless client (Mixed mode) can’t associate to G-2000plus v2 (802.11b

only mode).

Condition: In eWC->Advanced->Wireless: change 802.11 mode to 802.11b only, Setting Conexant STA

802.11 mode as b/g mixed mode, then STA can’t associate to G-2000plus v2.

SPRID: 60418320

3. [BUG FIXED]

Symptom: Report function doesn’t work.

Condition: In eWC->Advanced->LOGS->Reports: press “Start Collection” to monitor “Web Site Hits”,

“LAN IP Address”, and “Protocol/Port”. Press “Refresh” to update the information, but nothing appears.

SPRID: 60418347

Modification in 3.60(AAF.0)b2 | 04/07/2006

1. [BUG FIXED]

Symptom: Mass 64 bytes packets will cause switch interrupt fail and doesn’t receive packets.

Condition: 1) Configure G-2000plus v2: NAT on, Firewall off, Quick Route 0x9bf2, Flow Control off.

2) Configure LAN to WAN performance test for SmartBits.

3) Under 64 bytes packets, Rx interrupt fail, and doesn’t receive packets.

SPRID: 060307557

2. [BUG FIXED]

Symptom: WAN MAC Address Spoof failed.

Condition: In eWC->Advanced->WAN->MAC: when choose “Spoof this computer's MAC Address - IP

Address” and press applies, an error messages”Can not get the WAN MAC Address” occurred.

SPRID: 060307559

3. [BUG FIXED]

Symptom: ZyAIR G-100 can’t associate with G-2000plus v2 when 802.11 mode is set to 802.11b only.

Condition: 1)In eWC->Advanced->wireless: choose “802.11 mode” as “802.11b only”.

2) Because preamble setting doesn’t match, some STA like “ZyAIR G-100” can’t associate successfully.

SPRID: 060309804

4. [BUG FIXED]

360AAF1C0.RTF 4/10

ZyXEL Confidential

Symptom: Local database user account can pass the authentication when using RADIUS only.

Condition: 1) In eWC->Advanced->Wireless: choose security as “802.1X+NO WEP” and authentication

database as “RADIUS only”.

2) In eWC->Advanced->AUTH. Server->Trusted User: add one active user “1234”.

3) Wireless STA can use “1234” to pass the authentication.

SPRID: 060310888

5. [BUG FIXED]

Symptom: system reboot many times after overnight stress test. (16 STAs run FTP+HTTP data

transmission)

Condition: The below two test cases can reproduce this issue.

1) Let 16 wireless clients associate to DUT at the same time, run the FTP and HTTP data transmission

between eSTA and all wireless clients. After overnight test, DUT reboot many times.

2).DUT reboot when run WLAN throughput test for 64 WEP\128 WEP and WPA-PSK\WPA2-PSK.

SPRID: 060311932

6. [BUG FIXED]

Symptom: STA using wrong password and CA can still pass the WPA2 authentication once STA passed

the WPA2 authentication before.

Condition: STA using wrong password and CA can still pass the WPA2 authentication once STA passed

the WPA2 authentication before.

SPRID: 060313945

7. [FEATURE CHANGED]

-USA(255), Taiwan(238), Philippine(216), India(214), Brazil(208) use 11 channels.

-Not Used(223, 251, 210), Morocco(239), Slovak(228), Slovenia(215), European CTR21(212),

ZyXEL(000) use 13 channels.

-Others (include Japan 234) use 13 channels.

Modification in 3.60(AAF.0)b1 | 02/22/2006

1. First firmware release

CI Command List

Command Class List Table

System Related Command Exit Command Ethernet Related Command

Wireless LAN Related Command IP Related Command Bridge Related Command

Radius Related Command 802.1x Related Command Certificates

Radserv

SystemRelatedCommand Home

Command Description

sys

Callhist

display display call history

remove <index> remove entry from call history

countrycode [countrycode] set country code

domainname display domain name

Edit <filename> edit a text file

extraphnum maintain extra phone numbers for outcalls

add <set 1-3> <1st phone num> [2nd

phone num] add extra phone numbers

360AAF1C0.RTF 5/10

ZyXEL Confidential

display display extra phone numbers

node <num> set all extend phone number to remote node <num>

remove <set 1-3> remove extra phone numbers

reset reset flag and mask

Feature display feature bit

Hostname [hostname] display system hostname

Logs

Clear clear log error

Display display log error

Syslog

active [0:no/1:yes]

display <FacilityNo> set/display syslog type flag

facility [Local ID(1-7)] set syslog facility

server [domainName/IP] set syslog server IP address

load <entry no.> load remote node information

disp <entry no.>(0:working buffer) display remote node information

nat <none|sua|full_feature> config remote node nat

nailup <no|yes> config remote node nailup

save [entry no.] save remote node information

Stdio [second] change terminal timeout value

Trcdisp parse, brief,

disp monitor packets

Trclog

Trcpacket

Version display RAS code and driver version

View <filename> view a text file

Wdog

switch [on|off] set on/off wdog

cnt [value] display watchdog counts value: 0-34463

Romreset restore default romfile

Socket display system socket information

Filter

netbios

roadrunner

debug <level> enable/disable roadrunner service

0: diable <default>

1: enable

display <iface name> display roadrunner information

iface-name: enif0, wanif0

restart <iface name> restart roadrunner

Ddns

debug <level> enable/disable ddns service

display <iface name> display ddns information

restart <iface name> restart ddns

logout <iface name> logout ddns

Cpu

display display CPU utilization

Firewall

acl

disp Display specific ACL set # rule #, or all ACLs.

delete Delete specific ACL set # rule #.

active <yes|no> Active firewall or deactivate firewall

clear Clear firewall log

cnt

360AAF1C0.RTF 6/10

ZyXEL Confidential

disp Display firewall log type and count.

clear Clear firewall log count.

debug Set firewall debug level.

tosctrl

destination Display TOS destination hash

incomplete Display TOS incomplete List.

dynamicrule

display Display firewall dynamic rules

tcprst

rst Set TCP reset sending on/off.

rst113 Set TCP reset sending for port 113 on/off.

display Display TCP reset sending setting.

dos

smtp Set SMTP DoS defender on/off

display Display SMTP DoS defender setting.

ignore Set if firewall ignore DoS in lan/wan/dmz/wlan

ignore

dos Set if firewall ignore DoS in lan/wan/dmz/wlan

triangle Set if firewall ignore triangle route in

lan/wan/dmz/wlan

ExitCommand Home

Command Description

exit exit smt menu

Ethernet Related Command Home

Command Description

ether

Config display LAN configuration information

Driver

cnt

disp <name> display ether driver counters

ioctl <ch_name> Useless in this stage.

status <ch_name> see LAN status

version see ethernet device type

edit

load <ether no.> load ether data from spt

save save ether data to spt

Wireless LAN Related Command Home

Command Description

wlan

active [on|off] set on/off wlan

association display association list

breathLED [0|1] Turn off/on breath LED

chid [channel id] set channel

chgmod <0: B+G, 1: B only, 3: G only>

essid [ess id] set ESS ID

hideessid <on, off>

intrabssblock <0: Disable, 1: Enable>

preamble <0: Dynamic, 1: Long>

removeSTA <MAC ADDRESS> Remove STA

reset Reset WLAN

version display WLAN version information

360AAF1C0.RTF 7/10

ZyXEL Confidential

IPRelatedCommand Home

Command Description

address [addr] display host ip address

alias <iface> alias iface

aliasdis <0|1> disable alias

arp

status <iface> display ip arp status

dhcp <iface>

client

release release DHCP client IP

renew renew DHCP client IP

status [option] show dhcp status

dns

query

server <primary> [secondary] [third] set dns server

stats

default set default DNS server

httpd

icmp

status display icmp statistic counter

discovery <iface> [on|off] set icmp router discovery flag

ifconfig [iface] [ipaddr] [broadcast <addr> |mtu

<value>|dynamic] configure network interface

ping <hostid> ping remote host

route

status [if] display routing table

add <dest_addr|default>[/<bits>]

<gateway> [<metric>] add route

addiface <dest_addr|default>[/<bits>]

<gateway> [<metric>] add an entry to the routing table to iface

addprivate <dest_addr|default>[/<bits>]

<gateway> [<metric>] add private route

drop <host addr> [/<bits>] drop a route

status display ip statistic counters

udp

status display udp status

rip

tcp

status [tcb] [<interval>] display TCP statistic counters

telnet <host> [port] execute telnet clinet command

tftp

traceroute <host> [ttl] [wait] [queries] send probes to trace route of a remote host

xparent

join <iface1> [<iface2>] join iface2 to iface1 group

break <iface> break iface to leave ipxparent group

igmp

debug [level] set igmp debug level

forwardall [on|off] turn on/off igmp forward to all interfaces flag

querier [on|off] turn on/off igmp stop query flag

iface

<iface> grouptm <timeout> set igmp group timeout

<iface> interval <interval> set igmp query interval

<iface> join <group> join a group on iface

<iface> leave <group> leave a group on iface

360AAF1C0.RTF 8/10

ZyXEL Confidential

<iface> query send query on iface

<iface> rsptime [time] set igmp response time

<iface> start turn on of igmp on iface

<iface> stop turn off of igmp on iface

<iface> ttl <threshold> set ttl threshold

<iface> v1compat [on|off] turn on/off v1compat on iface

robustness <num> set igmp robustness variable

status dump igmp status

BridgeRelatedCommand Home

Command Description

Bridge

cnt related to bridge routing statistic table

Disp display bridge route counter

Clear clear bridge route counter

stat related to bridge packet statistic table

Disp display bridge route packet counter

Clear clear bridge route packet counter

RadiusRelatedCommand Home

Command Description

Radius

auth show current radius authentication server

configuration

acct show current radius accounting server configuration

802.1x Related Command Home

Command Description

8021x

debug Level [debug level] set ieee802.1x debug message level

Trace show all supplications in the supplication table

User [username] show the specified user status in the supplicant table

Certificates Related Command Home

Command Description

certific

ates

my_cert create Self-signed

request

Scep_enroll

Cmp_enroll

import Import certificate.

export <name> Export certificate.

view <name> View certificate content.

verify <name> [timeout] Verify certificate path.

delete <name> Delete the specific certificate.

list List all my certificate.

rename <old name> <new name> Rename the certificate.

def_self_signed Show the default self signed certificate name.

replace_factory Replace certificate to factory default.

ca-trusted Import <name> Import trust CA certificate.

Export <name> Export trust CA certificate

view <name> View trust CA certificate content

Verify <name> [timeout] Verify trust CA certificate path.

Delete <name> Delete the specific trust CA certificate.

List List all trust CA certificate.

360AAF1C0.RTF 9/10

ZyXEL Confidential

Rename <old name> <new name> Rename the trust CA certificate.

Crl_issuer <name> [on|off] Check the crl of trust CA.

Cert_manage

r Reinit Reinitialize the certificate manager.

Debug_tools Cm_reset Reset the certificate manager.

Radserv Related Command Home

Command Description

Radser

Time_out <value(ms)> Set radius server authenticate time out.

authenticator Set <entry_no active [ip secret]> Set trust AP.

remove <entry_no> Remove trust AP.

list List trust AP.

enable <1|0> Enable | disable internal RADIUS server.

360AAF1C0.RTF 10/10

Andere Handbücher für ZyAir G-2000 PlusV2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications WLAN-Router Handbücher

ZyXEL Communications

ZyXEL Communications P-334U Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-510S Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6716 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2601HN-F1 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-2000 Plus Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE7490-M904 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Multy U WSR30 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 3G Wireless Router NBG410W3G Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-415N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-419N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-416N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-334SH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MWR211 Kurzanleitung

ZyXEL Communications

ZyXEL Communications NBG-415N - V1.00 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX-200M1 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG 5715 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG1312 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-417N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications nbg334s Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6617 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6503 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Multy X WSQ50 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Armor Z1 NBG6816 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE7240-M403 Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung